Euclid — Mapping the geometry of the dark UniverseSpacecraft Payload Development Status Launch Instruments Ground Segment References
Euclid is a medium-class ("M-class") mission and is part of ESA's "Cosmic Vision" (2015–2025) scientific program. Euclid was chosen in October 2011 together with Solar Orbiter, out of several competing missions. The mission will investigate the distance-redshift relationship and the evolution of cosmic structures. It achieves this by measuring shapes and redshifts of galaxies and clusters of galaxies out to redshifts ~2, or equivalently to a look-back time of 10 billion years. It will therefore cover the entire period over which dark energy played a significant role in accelerating the expansion. 1) 2)
The Greek mathematician Euclid (born ~300 BCE, Alexandria, Egypt), is the most prominent mathematician of Greco-Roman antiquity, best known for his treatise on geometry, the Elements. His Elements is one of the most influential works in the history of mathematics.
Until about thirty years ago astronomers thought that the Universe was composed almost entirely of ordinary matter: protons, neutrons, electrons and atoms. In the intervening years the emerging picture of the composition of the Universe has changed dramatically. It is now assumed that ordinary matter makes up only about 4% of the Universe, and that the mass-energy budget of the Universe is actually dominated by two mysterious components: dark energy and dark matter.
Dark energy, which accounts for the vast majority (76%) of the energy density of the Universe, is causing the expansion of the Universe to accelerate. The existence and energy scale of dark energy cannot be explained with our current knowledge of fundamental physics.
The remaining 20% of the energy density is in the form of dark matter, which, like ordinary matter, exerts a gravitational attraction, but unlike normal matter does not emit light. The nature of dark matter is unknown, although several candidates are predicted by supersymmetric extensions of the standard model of particle physics. Plausible candidates for the cold dark matter are the axion and the lightest supersymmetric particle; massive neutrinos can account for the hot dark matter. One possibility to explain one or both of these puzzling components is that Einstein's Theory of General Relativity, and thus our understanding of gravity, needs to be revised on cosmological scales. Together, dark energy and dark matter pose some of the most important questions in fundamental physics today.
Euclid's cosmological probes: Euclid will map the large-scale structure of the Universe over the entire extragalactic sky - or half of the full sky excluding the regions dominated by the stars in our Milky Way. It will measure galaxies out to redshifts of ~2, which corresponds to a look-back time of about 10 billion years, thus covering the period over which dark energy accelerated the expansion of the Universe.
Euclid is optimized for two primary cosmological probes:
1) Weak gravitational Lensing (WL): Weak lensing is a method to map the dark matter and measure dark energy by measuring the distortions of galaxy images by mass inhomogeneities along the line-of-sight.
2) Baryonic Acoustic Oscillations (BAO): BAOs are wiggle patterns, imprinted in the clustering of galaxies, which provide a standard ruler to measure dark energy and the expansion in the Universe.
Weak gravitational lensing requires extremely high image quality because possible image distortions by the optical system must be suppressed or calibrated-out to be able to measure the true distortions by gravity.
The Euclid baryonic acoustic oscillations experiment involves the determination of the redshifts of galaxies to better than 0.1%, this can only be accomplished through spectroscopy.
Euclid is optimized to tackle some of the most important questions in modern cosmology: How did the Universe originate and why is it expanding at an accelerating rate, rather than slowing down due to the gravitational attraction of all the matter in it?
The discovery of this cosmic acceleration in 1998 was rewarded with the Nobel Prize for Physics in 2011 and yet we still do not know what causes it. The term 'dark energy' is often used to signify this mysterious force, but by using Euclid to study its effects on the shapes and locations of galaxies across the Universe, astronomers hope to come much closer to understanding its true nature and influence.
The Euclid Consortium, Partnerships and Euclid Flagship mockup galaxy catalog:
The Euclid Consortium is an organization that brings together teams of researchers in theoretical physics, particle physics, astrophysics and space astronomy, and also engineers, technicians, and management and administrative staffs working in public research laboratories and contributing to the Euclid mission. Together with ESA (European Space Agency) and aerospace industry, they are part of the Euclid Collaboration. 5)
The Euclid Consortium has been selected by ESA in June 2012 as the single official scientific consortium having the responsibility of the scientific instruments, the production of the data and of leading the scientific exploitation of the mission until completion. It is funded by national space agencies and national research organizations and led by the Euclid Consortium Lead (ECL) and a Euclid Consortium Board (ECB). The ECL and ECB are the primary contact points with ESA and with the Euclid Consortium members.
The Euclid Consortium is responsible of the definitions of the scientific goals, the mission concept, the science requirements and the survey. It is also in charge of the design, construction, tests, integration and delivery to ESA of the imaging and spectroscopic instruments VIS and NISP. The Euclid Consortium Science Ground Segment (EC SGS) is responsible of the design, development tests, integration and operation of the data processing tools, pipelines and data centers. It shares with the Euclid Consortium Science Working Groups (SWG) the responsibility of the scientific production and delivery of Euclid data releases, and their scientific analysis and interpretation. The Euclid Consortium COMS group organises and coordinates all Euclid Consortium communication activities.
Partnerships: In total, about 1500 scientists are registered in the EC, of which more than 900 are researchers in astrophysics, cosmology, theoretical physics and particle physics. More than 200 laboratories covering all fields in astrophysics, cosmology, theoretical physics, high energy, particle physics and space science that are relevant for the Euclid missions are contributing to Euclid. The Euclid Consortium comprises scientists from 14 European countries: Austria, Belgium, Denmark, France, Finland, Germany, Italy, Netherlands, Norway, Spain, Switzerland, Portugal, Romania and the UK. Canada and the USA through NASA and a few US laboratories are also contributing and members of the Euclid Consortium. — The Euclid Consortium meets once a year for its annual Euclid Consortium Meeting.
A key ingredient in order to prepare the scientific exploitation of this “golden” dataset is the development of synthetic observations of the real survey: a cosmological simulation that matches the expected volume and complexity of the real data. In a massive coordinated effort, a team of scientists of the Euclid project have worked together over the last year to develop the largest simulated galaxy catalogue ever produced, the so-called Euclid Flagship mockup galaxy catalog. 6)
The Euclid Flagship mockup galaxy catalog is based on the record-setting 2 trillion (2 x 1012) dark-matter particle simulation performed on the supercomputer Piz Daint, hosted by the Swiss National Supercomputing Center (CSCS). The simulation code was developed by a team of scientists at the University of Zurich, led by Joachim Staled from the Institute for Computational Science. This unique dataset reproduces with exquisite precision the emergence of the large scale structure of the Universe, with hundred of billions of dark matter halos hosting the galaxies we see in the night sky today.
Using this dark-matter cosmic web from the Flagship simulation, a group of scientists of the Euclid Consortium at Institut de Ciències de L’Espai (ICE, IEEC-CSIC) and Port d’Informació Científica (PIC) in Barcelona, in collaboration with the Cosmological Simulations Working Group, led by Pablo Fosalba (ICE, IEEC-CSIC) and Romain Teyssier (Institute for Computational Science at the University of Zurich), have built a synthetic galaxy catalog using state-of-the-art scientific pipelines that implement the Halo Occupation Distribution technique, a sophisticated recipe to relate dark and luminous matter in the universe.
The Euclid Flagship mockup galaxy catalog contains more than 2 thousand million galaxies distributed over the 3D cosmological volume that Euclid will survey. Synthetic galaxies in this simulation mimic with great detail the complex properties that real sources display: ranging from their shapes, colors, luminosities, and emission lines in their spectra, to the gravitational lensing distortions that affect the light emitted by distant galaxies as it travels to us, the observers. A dedicated web portal, CosmoHub hosted by PIC, the Euclid Spanish Science Data Center, will distribute the Flagship mockup data to the 1000+ members of the Euclid Consortium.
Armed with this new virtual universe, scientists will be able to assess the performance of the Euclid mission as a whole, the so-called Science Performance Verification. The Science Performance Verification exercise uses a full end to end simulation of the Euclid mission developed by ESA and the Euclid Consortium and represents a critical milestone of the project. Moreover the Euclid Flagship mockup will be an essential tool to develop the data processing and the science analysis pipelines developed by the Euclid Science ground Segment and the Science Working Groups and will set the science for the exciting discoveries that await the Euclid mission when the real data shall come.
Euclid Science Case (Ref. 8):
Euclid is ESA’s next cosmology mission after Planck. While Planck mapped the structure and the properties of the early Universe at a redshift of z~1100, Euclid will map the evolution of cosmic structures from z~2 until now. Euclid uses the clustering of matter, which includes both dark and luminous matter, to measure the accelerated expansion of the Universe at different cosmological times. The accelerated expansion is attributed to a substance of unknown nature, dubbed Dark Energy (DE). Euclid aims at measuring the equation of state parameter w(z), relating the DE ‘fluid’ pressure with its density, to an accuracy of 2% for the constant component, and 10% for a possible variation as a function of redshift. If w(z)= constant =-1, then the universe can be described by General Relativity with an additional cosmological constant providing the accelerated expansion and Cold Dark Matter for the mass (ΛCDM). However at the moment such a description cannot be reconciled with the standard model of particle physics. A significant non-zero variation would mean that either a new “dark energy” component with exotic physical properties exists in the Universe or our understanding of General Relativity needs to be revisited. It is the accuracy of the Euclid measurements that will put strong constraints on any fundamental physics theory.
Euclid will use a number of cosmological probes to measure the clustering properties but is optimised for two methods: (1) Galaxy Clustering (GC): measurement of the redshift distribution of galaxies from their Hα emission line survey using near-infrared slitless spectroscopy and (2) Weak Lensing (WL): measurement of the distortion of the galaxy shapes due to the gravitational lensing caused by the - predominantly dark - matter distribution between distant galaxies and the observer. The resulting galaxy shear field can be transformed into the matter distribution. This is done in a number of redshift bins to derive the expansion of the dark matter as a function of redshift. In addition, GC provides also direct information of the validity of General Relativity because we can monitor the evolution of structures subject to the combined effects of gravity, which forces clumping of matter, and the opposing force caused by the accelerated expansion. GC maps the distribution of the luminous, baryonic matter whereas WL measures the properties of the combination of both luminous and dark matter. The complementarity of the two probes will provide important additional information on possible systematics, which limit the accuracy of each of the probes.
The mission will address the following items and associated key questions:
• Is the Dark Energy simply a cosmological constant, or is it a field that evolves dynamically with the expansion of the Universe?
• Alternatively, is the apparent acceleration instead a manifestation of a breakdown of General Relativity on the largest scales, or a failure of the cosmological assumptions of homogeneity and isotropy?
• What is Dark Matter? What is the absolute neutrino mass scale and what is the number of relativistic species in the Universe as opposed to the structures predicted by the cold (non-relativistic) dark matter component?
• What are the initial conditions after the Big Bang, the power spectrum of primordial density fluctuations, which seeded large-scale structure, and are they described by a Gaussian probability distribution?
In order to accomplish the above science objectives, Euclid must survey a large fraction of the sky: 15,000 deg2, or 36% of the celestial sphere and image billions of galaxies out to z~2 up to an AB magnitude of 24.5 for 10σ extended objects in the visible band and of 24 for 5σ point sources in the NIR bands. The mission lifetime has been set to 6 years (6 months margin included), hence a telescope with a stable, large field of view is required.
The selection of the Euclid Deep Fields
• June 12, 2019: Scientists in the Euclid Consortium have selected three extremely dark patches of the sky that will be the subject of the mission's deepest observations, aiming at exploring faint and rare objects in the Universe. The position of the Euclid Deep Fields – one in the northern sky and two in the southern sky – was announced last week, during the annual consortium meeting in Helsinki, Finland. 7)
- With launch scheduled in 2022, ESA's Euclid mission is making great progress on both the hardware and the science preparations. Once in space, Euclid will survey a significant portion of the sky and image billions of galaxies across the Universe to investigate the past ten billion years of our cosmic history.
- The largest fraction of the mission's observations will be devoted to the Euclid wide survey, covering about 15,000 square degrees – more than one third of the entire sky – with an unprecedented combination of sharpness and sensitivity.
- The observations will enable scientists to investigate two cosmological phenomena: the evolution of how galaxies cluster together over the past 10 billion years, and the distortion of galaxy images due to the presence of ordinary and dark matter intervening between them and us, an effect called gravitational lensing. These two phenomena address the mission's key science goal: delving into the history of the Universe's expansion and characterizing the acceleration of this expansion during the last few billion years, something that is thought to be caused by the mysterious dark energy.
- In addition, roughly 10% of Euclid's observing time will be dedicated to a deep survey, repeatedly observing just three patches of the sky: the Euclid Deep Fields. The remaining time will be spent for dedicated calibrations of Euclid's two complex, highly sensitive instruments – the visible imager, VIS, and the NISP (Near-Infrared Spectro-Photometer).
- The three fields were carefully selected to contain a minimum amount of bright Milky Way stars – which 'outshine' faint sources like distant galaxies; of dust particles from the Milky Way's interstellar medium – which obscures the light from faint, distant sources; and of the so-called zodiacal light – the diffuse glow of dust in the Solar System, which affects the sensitivity of the observations.
- With a cumulative area of 40 square degrees, equivalent to just over 200 times the footprint of the full Moon in the sky, the Euclid Deep Fields span a portion of the celestial sphere that, while much smaller than the mission's wide survey, is still quite remarkable for a deep survey.
- "The choice of the Euclid Deep Fields has been a complex process because of many instrumental and scientific constraints, and we are very pleased with this solution that was recently approved by the Euclid scientific community," said Roberto Scaramella from the National Institute for Astrophysics in Italy, Euclid Survey Scientist and lead of the Euclid Consortium Survey Group.
- The selection of the fields was presented on 4 June during the annual meeting of the Euclid Consortium, which is led by Yannick Mellier of Institute d'Astrophysique in Paris, France, and comprises 1500 scientists from across Europe, the US and Canada.
- One of the three fields, the Euclid Deep Field North, with an area of 10 square degrees, is located very close to the Northern Ecliptic Pole, in the constellation Draco, the dragon. The proximity to the ecliptic pole ensures maximum coverage throughout the year; the exact position was chosen to obtain maximum overlap with one of the deep fields surveyed by NASA's infrared workhorse, the Spitzer Space Telescope.
- The other two fields are located in the southern sky. The challenge entailed selecting a region as close as possible to the Southern Ecliptic Pole, which would provide the best coverage, while at the same time avoiding bright sources in that area, which is home to the Large Magellanic Cloud, one of the galactic neighbors of our Milky Way.
- The Euclid Deep Field Fornax, also spanning 10 square degrees, is located in the southern constellation Fornax, the furnace. It encompasses the much smaller Chandra Deep Field South, a 0.11 square degree region of the sky that has been extensively surveyed in the past couple of decades with NASA's Chandra and ESA's XMM-Newton X-ray observatories, as well as the NASA/ESA Hubble Space Telescope and major ground-based telescopes.
- The third and largest of the fields is the Euclid Deep Field South, covering 20 square degrees in the southern constellation of Horologium, the pendulum clock. This was the most complex of the three to select because of various technical reasons, also taking into account the capabilities of future ground-based wide field telescopes like the Large Synoptic Survey Telescope. This field has not been covered to date by any deep sky survey and so has a huge potential for new, exciting discoveries.
- "We are convinced that the Euclid Deep Fields will become a preferred target in future years for multi-wavelength observations by many telescopes on ground and in space, and hopefully will become as useful and renowned as other famous deep fields surveyed in the past," adds Scaramella.
- As opposed to the roughly 30,000 single-visit observations that are needed to cover the Euclid wide survey, each targeting a field slightly apart from the other and with only minimal overlap, the satellite will pay multiple visits to the Euclid Deep Fields. Each field deep field is observed at least 40 times to uncover sources up to two magnitudes fainter than in the wide survey.
- The Euclid deep survey has a twofold function: while, on one hand, it provides an accurate data set to validate the main cosmological analysis based on the wide survey, on the other, returning to the same portions of the sky numerous times is also essential for stability monitoring and calibration purposes throughout the course of the mission.
- The three deep fields provide a window to examine large amounts of galaxies, looking back to the epoch when the first stars and galaxies formed, which occurred in the first billion year of the Universe's history. Due to cosmic expansion, the light emitted by these galaxies is redshifted to the infrared, so they are best detected at infrared wavelengths, which are poorly accessible from the ground due to Earth's atmosphere. Obtaining data comparable to Euclid's deep survey from the ground would require several tens of years of continuous observing time from the best near-infrared facilities.
- Together, the relatively large cumulative area of 40 square degrees, the depth of the survey and Euclid's imaging and spectroscopic capabilities in the infrared maximizes the chances of discoveries from the deep survey. The survey will detect several hundred thousand galaxies per square degree; in the case of the most distant sources (with redshift greater than six, corresponding to cosmic epochs when the Universe was less than one billion years old) estimates of the detection rate vary between a few tens to at most a few hundreds of sources per square degree, with the uncertainty being so high due to poor statistics from existing observational data. This will change with Euclid, which can survey an area of this size in a much shorter time than would be needed by Hubble or even the future NASA/ESA/CSA James Webb Space Telescope.
- Detections from the Euclid deep survey make for interesting targets for follow-up observations with future facilities such as the James Webb Space Telescope, scheduled for launch in 2021, the European Southern Observatory's (ESO) Extremely Large Telescope (ELT) that is being built in Chile, and next generation radio telescopes like the Square Kilometer Array (SKA) that will be installed in South Africa and Australia in the 2020s. Repeatedly observing the Euclid Deep Fields will also allow for the discovery and analysis of sources whose brightness and properties vary in time.
- Currently, there are ongoing programs to observe parts of the Euclid Deep Fields with Spitzer and several ground-based telescopes: Keck, Subaru, the Gran Telescopio Canarias (GTC) and ESO's Very Large Telescope (VLT). Euclid's deep survey will enable a multitude of exciting and unexpected investigations, especially when combining the data with independent surveys of the same fields to be conducted using other state-of-the-art observatories that will be available in the near future. These include the German-led eROSITA X-ray telescope, due to launch later this month, and the US-led Large Synoptic Survey Telescope, currently under construction in Chile, and NASA's future near-infrared space observatory, SPHEREx.
- "The selection of the Euclid Deep Fields is an important moment for the mission, anticipating many discoveries to come," commented René Laureijs, Euclid Project Scientist at ESA.
- "If we look at these patches of the sky with the naked eye, they appear quite dull because they are literally empty, devoid of nearby sources of light, and we are looking forward to seeing what Euclid will reveal once it sets its eyes on these dark windows into our cosmic past."
Euclid is a spaceborne optical/near-infrared survey mission of ESA to investigate the nature of dark energy, dark matter and gravity by observing the geometry of the Universe and on the formation of structures over cosmological timescales. Euclid will use two probes of the signature of dark matter and energy: Weak gravitational Lensing, which requires the measurement of the shape and photometric redshifts of distant galaxies, and Galaxy Clustering, based on the measurement of the 3D distribution of galaxies through their spectroscopic redshifts. The mission is scheduled for launch in 2020 and is designed for 6 years of nominal survey operations. 8)
The Euclid Spacecraft is composed of a Service Module (SVM) and a Payload Module (PLM). The Service Module comprises all the conventional spacecraft subsystems, the instruments warm electronics units, the sun shield and the solar arrays. In particular the Service Module provides the extremely challenging pointing accuracy required by the scientific objectives. The Payload Module consists of a 1.2 m three-mirror Korsch type telescope and of two instruments, the visible imager and the near-infrared spectro-photometer, both covering a large common field-of-view enabling to survey more than 35% of the entire sky. All sensor data are downlinked using K-band transmission and processed by a dedicated ground segment for science data processing. The Euclid data and catalogs will be made available to the public at the ESA Science Data Center.
The Sunshield, part of the SVM, protects the PLM from illumination by the sun and supports the photovoltaic assembly supplying electrical power to the spacecraft. The overall spacecraft envelope, compatible with the Soyuz ST fairing, fits within a diameter of 3.74 m and a height of 4.8 m (Figure 9).
Mechanical and Thermal Architecture: The SVM (Figure 10) is an irregular hexagonal base built around a central cone that provides the interfaces with the launcher and with the PLM and encloses the Hydrazine and Cold Gas propellant tanks. External equipment attached to the SVM include a high-gain antenna, three low-gain antennas, hydrazine and cold-gas thrusters, on dedicated pods to enhance thrust efficiency, and sun sensors.
The SVM accommodates the equipment grouped on six side panels (Figure 5) according to functions: (Telemetry and Telecommand, (TT&C), Attitude and Orbit Control (AOCS), Central Data Management (CDMS) and Electric Power (EPS), payload and Fine Guidance Sensor (FGS) warm electronics). Each panel can be individually dismounted to ease the integration of equipment and their access. The SVM footprint and the sunshield are designed to keep the PLM in the shadow within the allowed range of variation of the sun direction in the spacecraft reference frame. The PLM is structurally connected to the SVM via three glass-fiber bipods attached to the SVM in six points along the central cone upper ring of 2.25 m diameter and in three points to the baseplate of the PLM. This connection forms an isostatic mount preventing the SVM induced distortion to affect the PLM structure. The lower ring of the central cone is connected to the launcher vehicle adapter interface, a standard 1666 mm adapter, and locked at launch with a low shock separation clamp band.
The Sun Shield (SSH) consists of a carbon fiber reinforced plastic (CFRP) frame made of 2 vertical poles with diagonal stiffeners and 2 struts slanting toward the SVM. The front side carries the photovoltaic assembly in 3 identical panels, while the rear side is covered by Kapton MLI. On the top edge, an optical baffle consisting of 3 blades with decreasing height has the function of attenuating the sunlight diffracted towards the PLM down to negligible levels. A dedicated feature is embedded on a corner of the SSH to provide extra radiation shielding to the VIS Instrument focal plane.
The thermal control is based on a passive design using radiators, multilayer insulation (MLI) and heaters operated in Pulse Width Modulation. The design drivers are the short-term temperature stability of the PLM conductive and radiative interface under the maximum commanded Solar Aspect Angle (SAA) change, and minimal (<25 mW) heat flux into the coldest NISP radiator. High performance Kapton MLI is installed on the on SVM top floor, PLM bottom and Sun Shield rear side to minimise the heat flux and thermal disturbances onto the PLM.
Electrical and Data Handling Architecture: The spacecraft provides 28V regulated power to equipment and instruments electronics through protected lines individually commandable provided by the on-board PCDU (Power Conditioning and Distribution Unit). The PCDU also provides power to the heaters, to the pyro actuators and controls the charge and discharge of the battery. The battery is used only during the launch phase and is design to provide up to 419 W of power and a total energy of 300 Whr. In the other phases of the mission the sun shield three panels provide a power between 2430 and 1780 W depending from the spacecraft orientation and ageing of the panels.
One centralised on-board computer CDMU (Command and Data Management Unit) provides spacecraft and AOCS command, control and data processing. The CDMU is a modular unit including standard core boards plus dedicated I/O boards to interface AOCS and spacecraft units and devices. The Processor Module is based on a general-purpose space qualified microprocessor (LEON-FT) with minimum computational power of 40 MIPS and 5 MFLOPS. Two processor modules are comprised in a single-failure tolerant unit.
The number of scientific exposures and high-resolution images generate a high science data volume and require large on-board memory capable of hosting the 850 Gbit of daily generated data. The on-board MMU (Mass Memory Unit) has a capacity of 4 Tbit EoL sufficient to store 72 hours of scientific data and 20 days of spacecraft housekeeping data. The MMU stores instruments data and housekeeping and other ancillary data in named files organized in a two level folders’ structure.
The commands and telemetries are distributed and collected mostly via two standard Mil-Std-1553 buses, one dedicated to the spacecraft equipment and another to the instruments and mass memory, although some spacecraft equipment have dedicated connections. The instruments deliver high volume scientific data via high speed SpaceWire links directly into the mass memory. The platform bus handles non-packet remote terminals (RT) and the FGS, and is characterised by cyclic communication frames at 10 Hz, linked to the AOCS control cycle. The transfer layer protocol of the science bus is based on a cyclical communication frame at 60 Hz, maximising the efficiency of data transfer per communication frame.
Files stored in the mass memory are downloaded using the standard CCSDS File Delivery Protocol (CFDP) using the reliable transfer with acknowledges for the downlink and the simple unreliable transfer for uplink. Both the X- and K-band communication link can be used for the file transfer. The baseline configuration expect the directives of the CFDP to be transmitted via X-band to ensure visibility of the file downlink in progress by Ground also in case of adverse weather conditions, while data are downloaded via K-band to maximize the data rate. Any other combination is however possible.
RF communications: The telecommunications architecture includes two independent sections: an X-band section used for telecommands,
monitoring and ranging and a K-band section dedicated to high rate telemetry. The X-band section supports uplink of telecommands at two different rates (4 kbit/s and 16 kbit/s), downlink of real time housekeeping TM at two different information rates (2 kbit/s and 26 kbit/s), and standard ranging. The X-band section uses two X-band transponders, with receivers operated in hot redundancy and cross-coupled with CDMU TC decoders
and transmitters operated in cold redundancy and cross-coupled with CDMU TM encoders. Three X-band LGAs (Low Gain Antennas) with hemispherical coverage are used. Two of them (LGA-1 and -2), placed on opposite sides of the spacecraft and working in opposite circular polarisations, provide the omnidirectional coverage. LGA-3, mounted to the HGA support structure and sharing its pointing mechanism, supports high rate telecommand. The receivers are cross-coupled with LGA-1 or LGA-3, and LGA-2.
The K-band section supports downlink of recorded science and housekeeping telemetry at two different data rates: nominal at 73.85 Mbit/s and reduced at 36.92 Mbit/s to allow 3 dB extra link budget margin in adverse weather. The K-band section features two K-band modulators operated in cold redundancy, directly connected with the mass memory unit for the download of files. A 70 cm diameter K-band HGA (High Gain Antenna) is installed on a two-degree-of-freedom pointing mechanism with angular range of ±55° in azimuth and -70° to + 40° in elevation.
AOCS (Attitude and Orbit Control): The Euclid image quality requirements demand very precise pointing and small jitter, while the survey requirements call for fast and accurate slews. The AOCS provides 75 mas (milli-arcseconds) Relative Pointing Error (RPE) over 700 sec and 7.5 arcsec of Absolute Pointing Error both with 99.7% Confidence Level. A FGS (Fine Guidance Sensor) with 4 CCD sensors collocated within the VIS imager focal plane provides the fine attitude measurement. Cold gas thrusters with micro-newton resolution provide the forces used to actuate the fine pointing. The Gyro and FGS-based attitude control rejects the low frequency noise (less than 0.1 Hz) ensuring that the RPE requirement is met. Three star trackers (STR) provide the inertial attitude accuracy to comply with the APE requirement. The STRs are mounted on the SVM and thus subject to thermoelastic deformation when large slews are executed. To solve this problem, the FGS will be endowed with absolute pointing capabilities (based on a reference star catalogue), allowing cross-calibration of STR and FGS reference frames. A high performance gyroscope is included to reduce high frequency attitude estimation noise, to manage FGS delays and recovery from temporary outages. Four reaction wheels execute all the slews (field slews, 50-100 arcsec dithers, and large slews between different sky zones). After each slew maneuver the wheels are controlled to slow down until friction stops them. Keeping the reaction wheels at rest during operation ensures noise-free science exposures by eliminating the micro-vibration associated to reaction wheel actuation.
The micro-propulsion employed for fine attitude control is based on cold-gas Nitrogen thrusters in a configuration of two branches with six thrusters each. Four high-pressure tanks provide storage of 70 kg Nitrogen, sufficient for 7 years operation with nearly 100% margin.
Orbit control and attitude control in non-science modes are actuated by two redundant branches of ten 20 N hydrazine thrusters. In each branch, two thrusters, one on either side of the spacecraft, provide torque-free thrust for the Trajectory Control Maneuvers on the way to SEL2, monthly Station Keeping Maneuvers at SEL2, and disposal at end of life. The other eight thrusters provide force-free torques for angular momentum and attitude control in non-science modes. Hydrazine storage is provided by one central tank with 137.5 kg propellant mass capacity with 10% volume margin over and above the prescribed ΔV margins.
PLM (Payload Module)
The Euclid PLM is designed around a three mirrors anastigmatic Korsch Silicon Carbide (SiC) telescope feeding the two instruments, VIS and NISP. The light separation between the two instruments is performed by a dichroic plate located at exit pupil of the telescope. The PLM is in charge of providing mechanical and thermal interfaces to the instruments (radiating areas and heating lines). Whereas NISP is a stand-alone instrument with interface bipods, VIS is delivered in several separate parts: a FPA (Focal Plane Assembly) connected to proximity electronics, readout shutter unit and calibration unit, with dedicated mechanical and thermal interfaces with PLM.
The secondary mirror (M2) is mounted on a mechanism (M2M) for 3-DOF adjustment to compensate for launch and cool-down effects. In addition, the PLM hosts the FGS, used as pointing reference by the AOCS. All these detectors are mounted on the structure carrying the VIS focal plane, in order to ensure precise co-alignment.
Except for proximity electronics of the focal planes and FGS, all electronics are placed on the SVM to minimise thermal disturbances to the PLM.
Overall PLM architecture
The PLM is divided in two cavities, separated by the base plate:
• The front cavity including the telescope primary and secondary mirrors as well as the M2 refocusing mechanism and the associated support structure. This cavity is thermally insulated by a baffle.
• The instrument cavity including the telescope folding mirrors, the tertiary mirror, the dichroic splitter, the FGS, the two instruments (VIS and NISP), the shutter and calibration source for the VIS channel.
The PLM mechanical architecture is based on a common SiC baseplate which supports on one side telescope M1 and M2 mirrors and on other side the other optics and the two instruments. This architecture is well adapted to the selected thermal architecture with telescope and instrument cavities both passively controlled at neighbor temperatures.
The optical accommodation on the baseplate consists in implementing two folding mirrors (FoM1 and FoM2) at the entrance of the instrument cavity (between M2 and M3) to fold the optical beam in the plane of the baseplate. A third folding mirror (FoM3) allows having the VIS instrument close to an efficient radiative area.
PLM Optical design: The optical combination is a Korsch telescope design with a FoV offset of 0.47°. The useful pupil diameter is 1.2 m and the focal length is 24.5 m, i.e. plate scale of 8.3 mas/µm. The central obscuration has been minimized by designing a thin spider and careful design of M1 and M2 baffles. The resulting collecting area is larger than 1 m2.
The challenging spectral transmission and the VIS out-of-band rejection requirements are met by complementing the dichroic plate with highpass filter on FoM1 and FoM2 and bandpass filter on FoM3.
Focal length, Entrance pupil, Paraxial F-Number
24.5 m, Ø1200 mm, F/20.42
M1, M2, M3
Ø1250 mm, Ø350 mm, 535 x 406 mm2
FoM1, FoM2, FoM3
358 x 215 mm2, 283 x 229 mm2, 358 x 215 mm2
Useful collecting area
Offset along Y axis
XAN 0.787º x YAN 0.700º
XAN 0.779º x YAN 0.727º
FGS FoV envelopes
0.116º x 0.255º
PLM Thermal design: The passive thermal concept is adapted from the one successfully designed for Gaia PLM, requiring minimum heating power and providing best thermal stability. The telescope is cooled-down to its equilibrium temperature around 130 K. In nominal operations, only local heating capacity at constant power is needed to adjust instruments interface temperatures to the prescribed value. The required heating power in operational mode is therefore very low, ~140 W. Additional heating lines are installed for optics decontamination during commissioning phase and for survival mode, to keep instruments in their non-operational temperature range.
This cold telescope offers high thermo-elastic stability (SiC CTE is reduced to 0.4 µm/m/K) and cold environment (135 K) to the instruments. The heat leaks to cold instruments units are minimised (actually the PLM becomes a thermal sink for all units except NISP detector and VIS-FPA electronics which are connected to out-looking radiators). Specific harness design and highly decoupled conductive and radiative thermal interfaces allow minimising the heat leaks from the SVM and the sunshield.
Image quality performances: Thanks to the high thermal and dimensional stability of the telescope, and to the capacity for accurate in-orbit alignment, the Euclid PLM design offers excellent image quality performances, with large margins on the visible PSF (Point Spread Function) ellipticity, Full Width at Half Maximum (FWHM) and near Infrared Encircled Energy (EE) radius as shown in Table 2 and Table 3.This allows improved mission performances and offers flexibility for relaxed image motion requirements, i.e. reduced pointing stability and larger tolerance to micro vibrations.
< 137 mas
< 135 mas
< 0.053 as2
Euclid mission development status
• July 1, 2022: “After Euclid’s lifetime, it will just be floating in space. What if future beings found Euclid? How would they know anything about the humanity of the people?” – Tom Kitching, lead scientist of Euclid’s VIS instrument. 9)
- The team behind ESA’s Euclid mission has come together to create something special – a personal and collective galaxy-shaped fingerprint painting that has been attached to the spacecraft ready to launch into space. The collaborative nature of the artwork reflects the collaborative nature of the Euclid project overall; in both cases, people have come together to build something unique.
- So why a galaxy? Euclid is a galaxy-imaging machine that will observe billions of galaxies out to 10 billion light-years to make a 3D map of the Universe. The mission’s ultimate aim is to explore dark matter and dark energy.
- “Although Euclid has always been beautiful in concept and materials, it didn’t really say anything about the people involved and humanity as a whole. We asked ourselves whether we could do something artistic that would speak to people,” says Lisa.
- Scientists and engineers involved in Euclid were invited to dip their fingertips in paint and make their mark on a large piece of paper.
- “We wanted something authentic, not perfect, and not shaped too much,” continues Lisa. “The result is a piece of art with a wonderful energy to it that captures all the energy of the people involved.”
- The artwork was photographed and engraved onto a plaque using lasers at Mullard Space Science Laboratory – the same lasers that are used to etch parts for satellites. The plaque was fixed to Euclid and revealed at a ‘Goodbye Euclid’ event on 1 July 2022, when Euclid left Thales Alenia Space in Turin to head to Cannes for final testing as a complete system.
- Euclid’s project scientist René Laureijs suggested adding text to the plaque to explain the thoughts behind it. Continuing the artistic nature of the project, poet Simon Barraclough wrote a dedicated poem, from which a short extract was chosen to be etched on to the plaque in a typewriter font that swirls around the galaxy of fingerprints. This video ends with Simon reading part of Since his poem.
- Lisa summarises the Fingertip Galaxy: “It is adding an element of humanity to a dark, vast space, where as far as we can see there is no other intelligent life.”
• June 01, 2022: Spacecraft are not so different to humans – whilst the Sun can be a great source of vital energy, both people and machines must also be protected from its harmful effects. 10)
- Euclid is a space telescope designed to explore the dark Universe. It will make a 3D-map of the cosmos (with time as the third dimension) by observing billions of galaxies out to 10 billion light-years, across more than a third of the sky. In doing so, Euclid will tackle some of the most fundamental questions in cosmology – questions like: How did the Universe originate? Why is the Universe expanding at an accelerating rate? What is the nature of dark matter? What is dark energy?
- The previous step in Euclid’s journey, taking place on 24 March 2022, involved attaching Euclid’s payload module to its supporting service module. Next up, engineers will add the communications antenna and then Euclid will be complete. Finally, Euclid will be taken to Cannes where the complete spacecraft will be tested to check that it is ready for launch from Europe’s Spaceport in French Guiana.
• March 30, 2022: ESA is now one step closer to unveiling the mysteries of the dark Universe, following the coming together of two key parts of the Euclid spacecraft – the instrument-carrying payload module and the supporting service module. 11)
- On 24 March, over a dozen engineers gathered at Euclid industrial prime contractor, Thales Alenia Space in Turin, to carefully attach the two main parts of the Euclid spacecraft together. This task required such extreme precision that it took a whole day, followed by two days of connecting electronic equipment and testing that Euclid’s instruments still work.
- “It was really exciting to see the spacecraft coming together and get one step closer to seeing the mission become a reality. I almost feel like we have united two family members,” says Euclid Assembly, Integration and Testing engineer Hans Rozemeijer.
- Provided by Airbus Defence and Space, Euclid’s payload module houses a reflecting telescope to capture and focus light from distant stars, as well as two instruments to record this light – the VISible imager (VIS) and the Near Infrared Spectrometer and Photometer (NISP).
- Together, the telescope and instruments will image billions of galaxies with unrivalled accuracy to help astronomers better understand how they have evolved and clustered into cosmic structures over the last 10 billion years. This will give us clues on the nature of the enigmatic dark matter and dark energy, the two main drivers of the expansion of the Universe.
- Euclid’s instruments were integrated onto the payload module at the end of 2020. During 2021, the complete module successfully passed intensive testing under simulated space conditions to check that the telescope and instruments work as expected.
- The service module is equally as important. It contains computers to control the instruments as well as all the essential parts that Euclid needs to function, including subsystems to control the orientation of the spacecraft, propel it through space, distribute power, communicate with Earth, and handle data transfer.
- To connect the two modules together, engineers used a crane to lower the 800 kg payload module onto the service module via six attachment points. The team took great care to make sure that these points matched up very well, as a poor contact could induce stresses that damage the structure or deform Euclid’s 1.2 m telescope mirror.
- “We had to make sure that the flatness of the service module closely matched the flatness of the payload module at the connection points to reduce the loads on the telescope as much as possible,” explains Hans. “We were targeting a difference of less than 50 microns at every point. It’s not like a piece of Ikea furniture that you can hammer into place – this task required extreme precision!”
- To put this into perspective, 50 µm – or 0.05 mm – is the diameter of a thin human hair. Before attaching the two modules together, the assembly team checked the smoothness of the connection points with a laser and used very thin spacers called shims to even out the surfaces where needed.
- Hans continues: “After the modules were joined mechanically, we added connector brackets and plugged in the electrical connectors. Then we checked that everything was working properly. Finally, we covered the connector brackets and any tiny remaining gaps between the two modules with thermal insulation to really seal up the spacecraft.”
- “The Euclid spacecraft is truly complex and during the past months all the people involved in its integration were asked to be highly performant in meeting challenging schedule and operations. Let me thank the team of Thales Alenia Space (TAS) and our industrial partners for the remarkable job done in full synergy with ESA representatives to reach this important milestone,” says Paolo Musi, Director of Science Programs at TAS.
- In April engineers will attach Euclid to its combined sunshield and solar panels. The sunshield will shade the payload module from the Sun’s intense radiation, helping the mission perform to the very best of its abilities.
- Once the sunshield is connected, the high gain antenna will be added and then Euclid will be complete. The finished spacecraft will measure about 4.5 m tall and 3.1 m wide. After that Euclid will be tested as a complete system and prepared for launch from Europe’s Spaceport in French Guiana.
- Euclid is ESA’s mission to map the geometry of the Universe and better understand the mysterious dark matter and dark energy.
- The Euclid mission recently passed a milestone in its development with successful testing of the telescope and instruments showing that it can operate and achieve the required performance in the extreme environment of space.
- Thales Alenia Space is ESA’s prime contractor for the construction of the satellite and its service module. The payload module, including the telescope, was developed by Airbus Defence and Space.
- Euclid has two instruments provided by two consortia of European scientific institutes: the VISible imager (VIS) and the Near Infrared Spectrometer and Photometer (NISP).
• October 13, 2021: Euclid has reached a new milestone in its development with successful testing of the telescope and instruments showing that it can operate and achieve the required performance in the extreme environment of space. 13)
- Euclid experienced simulated space conditions in vacuum with the payload module cooled to -150ºC, the same temperature it will operate in once in space.
- After 60 days of intensive testing, 24 hours per day, 7 days per week, the vacuum chamber was opened and Euclid was taken out of the thermal tent.
• September 29, 2021: When tested in space-like conditions, the instrument on ESA’s Euclid space telescope set to measure the velocities of fast-receding galaxies abruptly stopped operating. Blindsided, the mission team feared it might take weeks or even months of extra time to uncover the reason why. Then a newly-convened ESA Tiger Team came to their assistance, pinpointing the cause and keeping Euclid on its set launch schedule. 14)
- Euclid is a space telescope set to explore the dark Universe. Over the course of its six year mission, operating 1.5 million km from Earth, Euclid’s 1.2 m diameter telescope will map the 3D distribution of up to two billion galaxies up to 10 billion light years away – around a third of the observable Universe. By revealing the Universe’s large-scale structure, and its pattern of expansion, the mission will cast light on the mysterious dark energy and dark matter making up the vast majority of the cosmos.
- To achieve this Euclid will employ a pair of instruments, designed by the nearly 1,000 scientists from 100 institutes from 13 European countries making up the Euclid consortium (plus NASA contributions). A visible light camera to image distant galaxies works alongside the Near Infrared Spectrometer and Photometer. NISP splits infrared light coming from these galaxies to derive key data, including their speed of outward expansion – measuring their ‘red shift’, on the same principle as a police radar gun.
- The problem? All of a sudden – while being tested with the rest of Euclid’s payload module in a cold vacuum state – NISP refused to go on working.
A camera that doesn’t respond
- Paolo Strada, ESA’s Senior Instrument Engineer for Euclid, explains: “The anomaly emerged with the instrument’s flight model, once it had already been fully tested, formally accepted then integrated into the spacecraft’s payload module – along with all other elements including the telescope, camera and optic bench.
- In late May the payload module had commenced ‘thermal vacuum’ testing inside a Centre Spatial de Liège chamber in Belgium when NISP began failing to initiate a second acquisition once its first acquisition was complete.
- “Imagine having a nice digital camera. You take a picture, the image is good and you want to take another. But as you try to do that, the camera control is no longer responding: you cannot set the exposure, or release the shutter. The only way to take another picture is to restart, but after taking another picture the problem reoccurs.”
- Regular restarts would scarcely be an option if Euclid is to complete its mammoth observing task; Euclid is designed to stream 850 Gbit of data daily to Earth, adding up to many petabytes of raw imagery over the mission’s lifetime.
Checking clues from telemetry
- “This was something we had never experienced before,” adds Paolo. “The NISP instrument had performed wonderfully through hundreds of hours of flawless operation, transferring hundreds of terabytes with no problem. The stopping did seem to depend on the cryogenic temperature experienced inside the chamber – it disappeared in ambient conditions – but our hands were tied when it came to investigating: NISP and the rest of the payload module stayed inside the thermal vacuum chamber, as the nominal test campaign continued in the meantime. It was almost like the mission was already in space; for the time being we were limited to the information we could obtain from telemetry.”
- Consortium members, industry partners and the ESA mission team were collectively baffled. Suspicion centered on the cables that transferred data from NISP’s focal plane sensors to its computer. Perhaps there was signal noise, electromagnetic interference from elsewhere, or cabling being improperly grounded?
- The range of possibilities was so wide however, that the Euclid team were considering a second, dedicated thermal vacuum campaign to get to the root of the problem – which would add weeks or months to their schedule and put their planned launch date beyond reach.
Enter the Tiger Team
- Before such drastic action was taken, the mission put together a ‘Tiger Team’ of ESA and industry experts to try and solve the mystery.
- Tiger Team member Felix Siegle, of ESA’s On-Board Computers and Data Handling Section, discovered the halting was rooted in a software bug, rather than any physical issue: “I read through the documentation, talked to the engineers, applied my trade, then began to feel a bit suspicious. If this really was purely physical in nature, then I’d expect the failure to be intermittent, but instead the freezing was occurring every single time.”
- Felix homed in on areas of software code where data transmission might overlap with instrument control, telling the Euclid team to take look in such regions.
- What they found was an error flag that in normal conditions should have been no problem was being wrongly interpreted by the software to signal that the telemetry and telecommand interface to the instrument sensors had become faulty, shutting it down.
Flagging an error
- “The error flag had not appeared before because the cable configuration had shifted very slightly from previous tests, changing the signal propagation time from the sensors to the computer interface,” adds Felix.
- “The cryogenic temperatures also played a role, creating slightly longer latency, hitting the window needed from a shift of just a few billionths of a second. The resulting flag was actually informative in nature, rather than something the software should have acted upon, but once identified, this unwanted behavior could be corrected with a simple software patch.
- “In terms of lessons learned, in dealing with such complex software, it is good to look at the areas of interface between hardware and software, the work of differing companies or engineers, because misunderstandings or mistakes can occur easily in such in-between regions.”
- Paolo and the rest of the Euclid team were delighted with the rapid solution: “Felix had called me and said he thought he’d found something within a half an hour. It shows the importance of a fresh look at a problem.”
- The next step will be spacecraft-level testing ahead of a launch by a baseline Soyuz vehicle from Kourou in French Guiana, scheduled for a launch window opening from the end of 2022.
• September 29, 2021: ESA’s Euclid mission aims to investigate dark matter, dark energy and the expanding Universe. 15)
• December 21, 2020: The optical and infrared instruments of Euclid, ESA’s mission to study dark energy and dark matter, have passed the qualification and acceptance review and are now fully integrated into the spacecraft’s payload module. This marks an important step forward in the assembly of the Euclid space telescope, which is scheduled for launch in 2022. 16)
- An upside down view, inside the Euclid payload module. A silicon carbide baseplate (dark grey) supports the telescope mirrors and two instruments: the visual imager (VIS) is towards the top and the near-infrared spectrometer and photometer (NISP) is to the right. The telescope's primary mirror and secondary mirror are hidden from view and inside the white baffle with gold multi-layer insulation, underneath the baseplate in this orientation.
- Light from the telescope comes through the hole in the centre of the baseplate, where two flat folding mirrors direct it to the tertiary mirror, seen at the far-left edge of the plate. The mirror directs the light to a dichroic filter that sits in front of the NISP instrument. Infrared light passes through the dichroic filter to the NISP instrument, while visible light is reflected to a third flat folding mirror, near the baseplate's front edge in this view, which directs the light to the VIS instrument.
- The visible and infrared instruments are crucial to measure the shapes and distances of billions of galaxies. This will enable scientists to reconstruct 10 billion years of cosmic history, and investigate the mysterious dark matter and dark energy that are thought to dominate the Universe.
- After the successful integration of both instruments and the telescope, the so-called 'cold units', the payload module will be shipped to Centre Spatial de Liège, Belgium in April 2021. There, the instruments will be tested for optical compatibility and performance at the operating temperatures in space (ranging from -193°C to +17°C).
- "We want to make sure that the instruments perform as predicted. Therefore, we will perform tests in a thermal vacuum chamber that can simulate the conditions of space as well as possible on Earth," says René Laureijs, ESA's project scientist for Euclid.
• December 10, 2020: Thales Alenia Space has delivered the K-band high gain antenna to be integrated with the rest of the Euclid satellite in its plant in Turin. Thales Alenia Space in Spain is responsible for the deep space communications system, which comprises the communications panel delivered in 2019 and the high gain antenna, built by Thales Alenia Space in Rome. Thales Alenia Space in Italy is the satellite prime contractor of the Euclid mission and also responsible for the service module while Airbus in France as main industrial partner is developing the instrument. 17)
- From its halo orbit about L2 (Lagrangian Point 2), Euclid will map the 3D distribution of up to two billion galaxies and associated dark matter during a six-year mission, covering most of the observable sky outside our Milky Way. The complete survey consists of 150 thousands high definition images with associated color and spectral information, resulting in close to a petabyte of data to be downlinked. This huge amount of data will be transmitted by the satellite from its orbit around the L2, using its K-band (26 GHz) radiofrequency data transmission system to the ESA's 35m deep space stations located in Cebreros, Spain, and Malargüe, Argentina. Euclid also incorporates an X-band system to control and monitor the spacecraft, and measure its distance to Earth.
- The Euclid K-band deployable and steerable high gain antenna draws on Thales Alenia Space in Italy’s unique expertise in this domain in exploration missions to the Solar System, like Cassini-Huygens (Saturn), BepiColombo (Mercury) and ExoMars (Mars).
- Thales Alenia Space in Italy has also provided the X-band Transponder, while the X-band and K-band Traveling Wave Tube Amplifiers (TWTA) have been developed by Thales Alenia Space in Belgium.
- The Service Module and the Payload Module are currently under their final integration tests, respectively in Thales Alenia Space in Turin and in Airbus in Toulouse.
- After the mating of the 2 modules and the large Sunshield Solar array, expected in Thales Alenia Space in Turin in the third quarter of 2021, the full flight model spacecraft will be subjected to the environmental test campaign, paving the way to its launch.
• July 09, 2020: ESA’s Euclid mission has reached another milestone on its journey towards launch. Its two instruments are now built and fully tested. These have been delivered to Airbus Defence and Space in Toulouse, France, where they are now being integrated with the telescope to form the mission’s payload module. 18)
- Euclid consists of a 1.2-meter mirror telescope that is designed to work at both visible and near-infrared wavelengths – the latter being just longer than the red light humans can see. The telescope will collect light from distant cosmic objects and feed it into two instruments. The Visible instrument (VIS) and the Near Infrared Spectrometer and Photometer (NISP) will run in parallel, recording data simultaneously from whatever portion of the sky the telescope is pointed at.
- Euclid’s mission is to measure the shapes of more than a billion galaxies, and the accurate redshifts of tens of millions of galaxies across more than one third of the sky. The redshift is an effect caused by the expansion of the Universe. It stretches the wavelength of light emitted by distant galaxies; the further away the galaxy, the more extreme its redshift. The galaxies in Euclid’s survey will span 10 billion years of cosmic history, and allow scientists to investigate the mysterious dark matter and dark energy that are thought to dominate the Universe.
- The VIS instrument will handle the precise measurement of galaxy shapes by taking the very best images of distant galaxies that it possibly can. To do this, the instrument uses a mosaic of 36 CCDs, each of which contains 4000 pixels by 4000 pixels. This gives the detector a total of about 600 megapixels.
- “The design, development, manufacturing, testing and calibration of the VIS instrument over a dozen years to a stringent specification has been a challenge,” says Mark Cropper, VIS instrument Lead and Professor at the UCL Mullard Space Science Laboratory, UK.
- “We are immensely proud of what the VIS Team has achieved to bring this project to its culmination. That the final performance exceeds our expectations is a tribute to their expertise, dedication and professionalism.”
- Not only is the number of pixels impressive, the instrument will also deliver the best low-light sensitivity over a broad range of wavelengths at long integration times.
- “These are very special CCDs, they’ve been developed specifically for Euclid over many years,” says Alex Short, ESA’s VIS payload engineer.
- The other instrument, NISP, is dedicated to making spectroscopic measurements of galaxies, which involves splitting their light into individual wavelengths. This allows the redshifts to be deduced. This property allows cosmologists to estimate the distance to the galaxy in question, and will allow Euclid’s data to be turned into the largest, most accurate 3D survey of the Universe ever conducted.
- “The international NISP team and supporting industries made an incredible job to design, develop and test this challenging instrument,” says Thierry Maciaszek, NISP instrument project manager, from CNES and Laboratoire d'Astrophysique de Marseille, France.
- “This is, however, not the end of the story for us as many major activities have to be completed with NISP at satellite level. We are waiting impatiently for the first light in flight demonstrating the excellent global performances.”
- The NISP detector will feature the largest field of view ever flown in space for an infrared instrument.
- “The quality of the optics is just amazing,” says Tobias Boenke, Mission System & NISP Instrument Engineer at ESA.
- A key factor in achieving Euclid’s exceptional optical accuracy was a decision made early in the project’s history to construct the entire payload module out of silicon carbide. The use of this material at ESA was pioneered in the manufacture of the telescope for the Herschel space mission. On ESA’s Gaia mission, the support structure for the spacecraft’s subsystems were mounted on a silicon carbide frame. On Euclid, the material has been used for the instruments as well as the telescope.
- Whereas metal expands and contracts as its temperature changes, thus degrading an optical system’s ability to focus light, silicon carbide is extremely stable to such variations in temperature. But using the compound brings its own challenges. Silicon carbide is a ceramic and so much more brittle than metal.
- “It was a big challenge to be able to manufacture the instruments from this material and make sure they can remain undamaged during the launch,” adds Tobias.
- Like VIS, NISP also uses specially designed state-of-the-art detectors to record the faint light coming from distant stars and galaxies. Unlike VIS, NISP can also operate in spectrographic mode. The detectors, which are operated at –180°C to provide ultra-low noise and high sensitivity, register these ‘spectra’ and convert them into tiny electronic signals. These signals can then be amplified and accurately measured to provide the photometric and spectroscopic redshifts.
- The instruments will receive light from Euclid’s telescope, which has already been assembled at Airbus, Toulouse. Like the instruments, it too is made from silicon carbide and is a state-of-the art construction in all senses.
- “We are pushing all the manufacturing levels to the limit,” says Luis Miguel Gaspar Venancio, ESA’s Mission Performance & Optical Systems Engineer.
- A special component behind the telescope, called the dichroic, separates the collected light and diverts the visible wavelengths to VIS and the infrared wavelengths to NISP.
- When the information from VIS and NISP is combined, scientists will be able to deduce the way that the Universe’s large-scale distribution of galactic structures has built up throughout cosmic history. This will help them determine the speed at which such structures grow, providing strong constraints on the nature and amount of dark matter and dark energy in the Universe.
- The instruments were prepared for delivery to Airbus just before the COVID-19 pandemic imposed restrictions and lockdowns in many ESA member states. Fortunately, VIS was already at Airbus, and NISP had to wait for a few weeks for shipment from Marseille to Toulouse, but was not on the critical path.
• November 19, 2019: The Euclid mission is taking shape in the cleanrooms of Airbus: engineers are now finishing assembly of the telescope, the main instrument of the Payload Module, for which Airbus is responsible within this European Space Agency (ESA) mission led by Thales Alenia Space (TAS) as industrial prime contractor. 19)
- The Euclid Payload Module contains the largest telescope with such optical performance ever designed and integrated by Airbus.
- After mounting the truss on the base plate, both made of silicon carbide, Airbus is now completing the final phase of integration: the optical alignment. The telescope will then be sent to Thales Alenia Space, where it will go through further testing and be integrated with the platform.
- The whole payload integration necessitates extreme clean room discipline with a perfect cleanliness, temperature stability and lack of vibration. For example, during the mechanical assembly, precision of operations is calculated in µm, where for the optical alignment, the scale of precision is in nm.
- Giuseppe Racca, project manager of Euclid at ESA said: “Euclid is the second “Medium Class” mission in ESA’s Cosmic Vision program. With the ultimate goal to understand the origin of the Universe’s accelerating expansion, Euclid will map the geometry of the dark universe with unprecedented accuracy. To achieve that, we need the best team effort from 16 countries, mainly in Europe and America, hundreds of laboratories, etc. A true universal team for unlocking the secrets of the Universe.”
- Euclid will collect high resolution images of the sky by pointing the spacecraft to a new field in deep space once every 80 minutes. Within six years of observation, covering more than one third of the entire sky, Euclid will measure the shapes of, and distances to, more than 1 billion galaxies.
- “This telescope is the most complex we’ve ever designed and built. It must operate in extremely cold conditions of 100 Kelvin (- 170°C), relying on Airbus’ world-leading expertise in silicon carbide technology for space – already proven in orbit on ESA’s Herschel and Gaia missions,” said Philippe Pham, Head of Earth Observation, Navigation and Science at Airbus.
- The Euclid Payload Module has three primary features, the main telescope, a 1.2 m diameter mirror and a three-mirror Korsch telescope. The main telescope is made entirely of lightweight silicon carbide (SiC) which gives it excellent thermal stability and enables operation at 130 K (-140°C), making it invisible to near infrared wavelengths.
- The 1.2 meter mirror permits diffraction-limited observation of galaxies as faint as magnitude 24.5, while the Korsch telescope supplies light to its two scientific instruments, the Visible Imager (VIS), and the Near-Infrared Spectrophotometer (NISP).
- The VIS & NISP instruments are maintained in a very cold environment, at 155 K (-115°C) for the VIS focal plane and 90 K (-180°C) for the NISP one, while the VIS electronics have to be maintained at 290 K (20°C).
- The VIS & NISP instruments are developed by the Euclid Consortium and delivered to Airbus and Thales Alenia Space by ESA.
• September 19, 2019: Euclid is a medium-class mission in ESA's Cosmic Vision program to investigate the expansion of our Universe over the past ten billion years, probing cosmic epochs from before the expansion started to accelerate, all the way to the present. To this aim, the mission will survey galaxies at a variety of distances from Earth, using a 1.2 m diameter telescope with two instruments – the visual imager (VIS) and the near-infrared spectrometer and photometer (NISP) – and covering an area of the sky equivalent to more than 35 percent of the celestial sphere. 20)
- By making use of both weak gravitational lensing, which measures the distortion of distant galaxies caused by intervening matter, and baryonic acoustic oscillations, based on measurements of the clustering of galaxies, Euclid will capture a 3D picture of the evolving distribution of both dark and ordinary (or baryonic) matter in the cosmos. This will enable scientists to reconstruct the past few billion years of the Universe's expansion history, estimating the acceleration caused by the mysterious dark energy to percent-level accuracy, and possible variations in the acceleration to 10 percent accuracy.
- The satellite model shown in this photo (Figure 36) is not the so-called flight model – the one that will be eventually launched – but it contains flight-worthy spare parts. From a mechanical point of view, it is identical to the flight model, and it allows engineers to apply extreme thermal and mechanical stresses during testing, without having to subject the delicate flight hardware to same processes. These tests, which will soon involve vibrations using a large shaker to simulate launch conditions, are performed to determine whether the thermal and mechanical properties of the actual hardware correspond to the predictions.
- In order to reach Euclid’s ambitious science goals, the main design drivers include the quality and stability of the integrated optical system; the speed and completeness of its sky survey capability; accurate and stable pointing; and the ability to reliably transmit to the ground the huge volumes of scientific data that the satellite will gather. The design proposed by Thales Alenia Space, the mission’s prime contractor, is based on the experience gained with ESA’s Herschel and Planck missions, which both demonstrated excellent performance in orbit and delivered extraordinary data to delve into the mysteries of our Universe.
- In addition to that, a peculiarity of Euclid is that the satellite will maintain a very stable optical performance under the most extreme attitude changes that will occur during slew maneuvers. The recent thermal vacuum tests have simulated and successfully proven the capability to maintain the thermal stability in these conditions. The next step will be to confirm that also the optical stability will be ensured, but this will only happen during the end-to-end test of the payload module flight model next year.
- Meanwhile, integration and testing of the flight model of the Euclid telescope and service module have already started at the premises of Airbus in Toulouse, France and Thales Alenia Space in Turin, Italy, respectively. The two modules will be integrated in 2021, and the complete satellite will undergo final tests in preparation to launch, which is scheduled for 2022.
• July 23, 2019: The European Space Agency's Euclid mission, set to launch in 2022, will investigate two of the biggest mysteries in modern astronomy: dark matter and dark energy. A team of NASA engineers recently delivered critical hardware for one of the instruments that will fly on Euclid and probe these cosmic puzzles. 21)
- Based at NASA's Jet Propulsion Laboratory in Pasadena, California, and the Goddard Space Flight Center in Greenbelt, Maryland, the engineers designed, fabricated and tested 20 pieces of SCEs (Sensor-Chip Electronics) hardware for Euclid (16 for the flight instrument and four backups). These parts, which operate at minus 213 degrees Fahrenheit (minus 136 degrees Celsius), are responsible for precisely amplifying and digitizing the tiny signals from the light detectors in Euclid's NIASP (Near Infrared Spectrometer and Photometer) instrument. The Euclid observatory will also carry a visible-light imaging instrument.
- The image (Figure 37), taken in May 2019, shows the detectors and SCE (Sensor-Chip Electronics) on a flight model of the NISP instrument in the Laboratory of Astrophysics of Marseille in France. Eighteen SCEs have been delivered to ESA, and two more will soon be on their way. The detector system will undergo extensive testing ahead of launch.
- "Even under the best of circumstances, it is extremely challenging to design and build very sensitive and complex electronics that function reliably at very cold operating temperatures," said Moshe Pniel, the U.S. project manager for Euclid at JPL, who led the team that delivered the sensor-chip electronics. "This truly remarkable team, spread across two NASA centers, accomplished this task under intense schedule pressure and international attention."
- Euclid will conduct a survey of billions of distant galaxies, which are moving away from us at a faster and faster rate as the expansion of space itself accelerates. Scientists don't know what causes this accelerating expansion but have named the source of this phenomenon dark energy. By observing the effect of dark energy on the distribution of a large population of galaxies, scientists will try to narrow down what could possibly be driving this mysterious phenomenon.
- In addition, Euclid will provide insights into the mystery of dark matter. While we can't see dark matter, it's five times more prevalent in the universe than the "regular" matter that makes up planets, stars and everything else we can see in the universe.
- To detect dark matter, scientists look for the effects of its gravity. Euclid's census of distant galaxies will reveal how the large-scale structure of the universe is shaped by the interplay of regular matter, dark matter and dark energy. This in turn will allow scientists to learn more about the properties and effects of both dark matter and dark energy in the universe, and to get closer to understanding their fundamental nature.
- The NISP instrument is led by the Laboratory of Astrophysics of Marseille, with contributions from 15 countries, including the United States, through an agreement between ESA and NASA.
- Three NASA-supported science groups contribute to the Euclid mission. In addition to designing and fabricating the NISP sensor-chip electronics, JPL led the procurement and delivery of the NISP detectors. Those detectors were tested at NASA's Goddard Space Flight Center. The Euclid NASA Science Center at IPAC (ENSCI), at Caltech, will support U.S.-based investigations using Euclid data.
• December 18, 2018: ESA's Euclid mission has passed its critical design review, marking the successful completion of a major phase in the progress of the project. The review verified that the overall mission architecture and detailed design of all its elements is complete, ensuring that it will be able to perform the unprecedented galaxy survey needed to tackle the mysteries of the dark Universe, and clearing the way to start assembling the whole spacecraft. 22)
- The critical design review (CDR) board meeting took place on 21 November in Noordwijk, the Netherlands. While the individual elements of Euclid – the spacecraft, scientific instruments, launcher, and the operational and science ground segments – had already passed their independent CDRs, the mission-level review focussed on the ensemble of all these elements and ascertained their capability to function together to accomplish the mission's goals. The review verified that the most realistic predictions of the combined performances are compliant with the mission requirements.
- The review also assessed the feasibility of Euclid's survey with the designed flight hardware, which will image billions of galaxies across the cosmos at unprecedented sharpness and sensitivity during a nominal mission period of six years.
- With the completion of this milestone that validated the whole project – from the spacecraft development to launch and operations, including also the observational methods and data analysis strategy – the assembly, integration and testing of the spacecraft flight model can begin. Immediately after launch, scheduled for June 2022, the ground segment will be ready to take over and start the operations to perform the groundbreaking sky survey.
- Euclid is a medium-class mission in ESA's Cosmic Vision program to investigate the expansion of our Universe over the past ten billion years, probing cosmic epochs from before the expansion started to accelerate, all the way to the present. To this aim, Euclid will survey galaxies at a variety of distances from Earth, over an area of the sky covering more than 35 percent of the celestial sphere.
- By making use of both weak gravitational lensing, which measures the distortion of distant galaxies caused by intervening matter, and baryonic acoustic oscillations, based on measurements of the clustering of galaxies, the mission will capture a 3D picture of the evolving distribution of both dark and ordinary (or baryonic) matter in the cosmos. This will enable scientists to reconstruct the past few billion years of the Universe's expansion history, estimating the acceleration caused by the mysterious dark energy to per-cent-level accuracy, and possible variations in the acceleration to 10 percent accuracy.
- The spacecraft consists of a service module – comprising all conventional spacecraft subsystems as well as the instruments' warm electronics units, sunshield and solar arrays – and a payload module. On the payload module, Euclid's telescope – a 1.2 m-diameter three-mirror 'anastigmatic Korsch' configuration – will direct the cosmic light to two instruments: the wide-field visible imager (VIS) and the NISP (Near-Infrared Spectrometer and Photometer).
• November 15, 2018: In order to observe billions of faint galaxies and investigate the nature of the dark Universe, ESA's pioneering Euclid mission will require state-of-the-art optics. The first optical element to be delivered, the telescope's primary mirror (M1), has arrived at the premises of Airbus Defence & Space in Toulouse. 23)
- Euclid's optical design is based on a Korsch-type telescope with an aperture diameter of 1.2 m. The telescope has three curved mirrors (including M1) and three flat mirrors, which direct the light to the two instruments on board with the aid of a dichroic filter that separates visible and near-infrared wavelengths.
- The Korsch design enables high-quality imaging over a very large field of view, providing a wide-angle camera that is at the same time also extremely sharp. This is no mean feat: in Earthly terms, the telescope would be able to observe a 200-m wide field – equivalent to the area of 8 football pitches – from a distance of 18 km with a resolution of a 1-Euro coin (about 2 cm in diameter).
- All of the mirrors are made of the same material: silicon carbide. This same material is also being used for the structure of the telescope in order to minimize the impact of temperature changes on the image quality of the telescope.
- "This will enable the entire telescope to 'breathe' smoothly and slowly with the temperature changes, improving the stability of its performance," said Luis Miguel Gaspar Venancio, principal engineer for the Euclid Telescope.
- All of the mirrors' surfaces are being manufactured to a degree of perfection unprecedented for any ESA mission observing the cosmos at visible wavelengths. Super-smooth optical surfaces are needed because of the extreme sensitivity of the scientific output to any minute reduction in image quality.
- "The science that Euclid will perform requires an extremely accurate and stable telescope," says René Laureijs, Euclid project scientist. "We want to measure tiny distortions of the shape of galaxies due to the presence of intervening dark matter bending the paths of light from these distant galaxies. By measuring billions of galaxies, we can then map the distribution of the dark matter in the Universe."
- The constraining specifications in terms of optical quality are particularly stringent in the case of the M1 mirror, Euclid's largest optical component. The silver-coated, 1.2-m diameter concave parabolic mirror was recently delivered to Airbus from its French manufacturer, Safran Reosc.
- The remarkable precision of the primary mirror's shape is such that, if expanded to a diameter of 973 km – equivalent to the north-south extent of France – then the mirror's surface would only deviate from its perfect shape by less than 1.47 cm. Not only its parabolic shape must be extremely accurate, but its surface must be polished to extremely high precision. To continue with the same comparison, if the mirror were expanded to the size of France, any patch of 4 km in diameter would have no 'peaks' higher than the thickness of a human hair.
- The other part of Euclid's optics that has already been produced and tested is the dichroic plate, which is made of high quality fused silica glass. Its function is to divide spectrally the incoming light, reflecting visible wavelengths to the Visual Imager (VIS) and near-infrared ones to the Near-infrared Spectrometer and Photometer (NISP).
- In order to fulfil its role, both of its surfaces are coated with more than 180 thin layers of di-electric materials. High uniformity of these coatings across the 117 mm diameter plate was required.
- Although it is the smallest optical component, the dichroic plate is the most critical. Any deformation, or bending, of the dichroic surfaces caused by the deposition of the reflective coating and by temperature changes must be compensated. This is obtained by adjusting the thickness of the coatings on each side in such a way that the deformation of both sides is in opposite directions.
- "This means that, when one side of the dichroic is pulled in one direction due to thermo-mechanical effects, then the other side is pulled in the opposite direction – thus counter-balancing the deformation induced by the first side," said Venancio.
- A flight-worthy model of the dichroic plate was integrated in its final mount and tested by Airbus Defence & Space in October 2017. The tests were performed by Optics Balzers Jena GmbH, the coating manufacturer, for the spectral reflectance and transmittance – how much of the incoming light is reflected and how much is transmitted per wavelength – and the surfaces deformation measurement at cold temperatures will be performed by AMOS, the dichroic glass polisher. Another flight-worthy model of the dichroic plate will be delivered to Airbus by the end of November 2018.
- The manufacturing of the other five mirrors is ongoing and all of them are expected to be delivered to Airbus Defence & Space between the end of 2018 and the beginning of 2019. During this production phase, the shape of each mirror is being measured, and the spectral reflectance of two of the flat mirrors is also being sampled.
- Tests of the integrated telescope will follow in 2019, once all of the optics have been mounted in the telescope structure.
- Meanwhile, the team has completed the Critical Design Review (CDR) for all the units and subsystems on the satellite. These are formal project milestones to certify that the design is supported by adequate analysis and tests, authorizing the manufacturing and assembly of the flight hardware. The spacecraft CDR was successfully held earlier this year, and the CDR at mission level, encompassing all mission elements – instruments, spacecraft, science and operational ground segment – is currently ongoing and will be completed at the end of November.
- "The delivery of the flight model of the primary mirror is a very important milestone in the project development," says Giuseppe Racca, Euclid project manager. "In order to avoid delays, the flight models of many elements, like the primary mirror, have already been built, and we are now looking forward to the mission critical design review as a final confirmation that the Euclid design is sound in all of its components and can provide the required scientific performance."
• 23 October 2017: Technical problems discovered during ground testing of U.S.-built detectors for the European Space Agency’s Euclid astronomy mission will delay the completion of the telescope’s scientific payload, jeopardizing the observatory’s 2020 launch target, the head of NASA’s astrophysics division said last week. 24)
- Officials expect the problem, traced to an electronics package, will delay assembly of the detectors with Euclid’s NISP (Near-Infrared Spectrometer and Photometer) instrument at least 12 months.
• 26 April 2017: ESA's Euclid mission has passed another important milestone with the delivery of the first three HgCdTe state-of-the art detectors for the Near-Infrared Spectrometer and Photometer instrument. When completed, the NISP instrument will include 16 of these detectors. Each of them is composed of 2040 x 2040 pixels, 18 µm in size. 25)
• 07 February 2017: The first flight hardware, in the form of four detectors known as CCDs (Charge Coupled Devices), has been delivered to MSSL (Mullard Space Science Laboratory) by the UK company e2v. Each large area CCD comprises 4096 x 4132 pixels. The VIS instrument is being built by a consortium of nationally funded institutes led by MSSL. 26)
- The delivered CCDs will soon undergo extensive calibration with the flight electronics at MSSL in Surrey before being integrated into the VIS focal plane at CEA in Paris. Meanwhile, the CDR (Critical Design Review) for the VIS instrument is underway and this will be followed by the CDR for the telescope later in the year. The VIS instrument will be integrated into the telescope at Airbus facilities in Toulouse in 2018. 27)
• 17 December 2015: Euclid, ESA's dark Universe mission, has passed its preliminary design review, providing confidence that the spacecraft and its payload can be built. It's time to start 'cutting metal'. 28)
- "This is really a big step for the mission," says Giuseppe Racca, Euclid's project manager. "All the elements have been put together and evaluated. We now know that the mission is feasible and we can do the science."
- First proposed to ESA in 2007, Euclid was selected as the second medium-class mission in the Cosmic Vision program in October 2011. Italy's Thales Alenia Space was chosen as the prime contractor in 2013.
• 29 November 2013: Multilateral agreements for Euclid and Gaia have been signed at the Science Program Committee meeting, held on 28 November 2013 at ESA Headquarters in Paris, France. 29)
- This agreement is between the ESA and the funding agencies of the eleven European countries participating in the Euclid Mission Consortium: the Agenzia Spaziale Italiana (Italy); the Centre National d’Etudes Spatiales (France); the Deutsches Zentrum für Luft- und Raumfahrt e.V. (Germany); the Danish Space Research Institute (Denmark); the Fundação para a Ciência e a Tecnologia (FCT), Space Office (Portugal); the Ministerio de Economía y Competividad (Spain); the Nederlandse Onderzoekschool Voor Astronomie (The Netherlands); the Norwegian Space Centre (Norway); the Romanian Space Agency (Romania); the United Kingdom Space Agency (UK); and the University of Helsinki (Finland). Switzerland participates via PRODEX.
- The infrared sensors for the Near-Infrared Spectroscopy and Photometry Instrument (NISP) will be provided by NASA in line with a Memorandum of Understanding signed in January 2013.
• 24 January 2013: NASA has joined the European Space Agency's (ESA's) Euclid mission, a space telescope designed to investigate the cosmological mysteries of dark matter and dark energy. 30)
- "NASA is very proud to contribute to ESA's mission to understand one of the greatest science mysteries of our time," said John Grunsfeld, associate administrator for NASA's Science Mission Directorate at the agency's Headquarters in Washington.
- NASA and ESA recently signed an agreement outlining NASA's role in the project. NASA will contribute 16 state-of-the-art infrared detectors and four spare detectors for one of two science instruments planned for Euclid.
- In addition, NASA has nominated three U.S. science teams totaling 40 new members for the Euclid Consortium. This is in addition to 14 U.S. scientists already supporting the mission. The Euclid Consortium is an international body of 1,000 members who will oversee development of the instruments, manage science operations and analyze data.
• First proposed to ESA in 2007, Euclid was selected as the second medium-class mission in the Cosmic Vision program in October 2011. Italy's Thales Alenia Space was chosen as the prime contractor in 2013.
Launch: Euclid had been slated for launch in the first quarter of 2023 aboard a Soyuz-STB rocket from Kourou, French Guiana. With Arianespace suspending its partnership with the Russian Federal Space Agency as a result of Russia’s invasion of Ukraine, Soyuz is no longer available as a launch vehicle, and ESA has been forced to look for an alternative.
While no official announcement has yet been made, the Euclid mission is expected to be transferred to Arianespace’s new Ariane 6 rocket, which is currently preparing for its debut mission later this year. The Euclid launch will most likely use the Ariane 62 configuration.
Orbit: The Euclid spacecraft will be launched into a halo orbit about L2 (Lagrangian Point 2).
Spacecraft mass, size
2.200 kg, 4.5 m long x 3.1 m in diameter
3-mirror anastigmatic Korsch telescope. Entrance pupil of primary mirror: 1.20. Silicon Carbide mirror
Visible (550-900 nm) and near infrared (900-2000 nm)
855 Gbit/day, data transfer in 4 hrs daily slot in K-band (25.5-27.0 GHz)
Step and stare, exposure time up to 4500 s/field
Spacecraft and Service Module
Thales Alenia Space
Payload Module, telescope:
Airbus Defence and Space
Visible imager (VIS) and Near Infrared Spectrometer and Photometer (NISP) Euclid Consortium
0.1 arcsec for VIS; 0.3 arcsec for NISP
Common VIS and NISP FOV
Very broadband (R+I+Z) for VIS; broadband Y, J and H for NISP
Grism spectral range
1 “Blue” grism (920 nm – 1250 nm) , 3 “Red” grisms (1250 nm – 1850 nm; 3 different orientations)
Grism spectral resolution
380 for a 0.5 arcsec source (slitless spectroscopy)
Visible CCD detectors
36 (6 x 6), 4096 x 4132 pixels each. ESA/e2v
Near infrared detectors
16 (4 x 4), 2040 x 2040 pixels each. ESA/NASA/H2GR from Teledyne TIS
15,000 deg2, excluding galactic and ecliptic planes,
40 deg2, location TBD,
Main cosmological probes
Weak lensing (morphometry/distortion of galaxies); Galaxy Clustering (spectroscopy/redshift of galaxies)
ESOC (European Space Operations Center)
ESAC (European Space Astronomy Center) and Euclid Consortium
Scientific instruments (VIS, NISP)
Euclid will be operated in a large-amplitude libration halo orbit (~0.9 x 106 km) around the Lagrange point L2 of the Sun-Earth system , it consists of scanning the sky with a VIS (Visual Instrument) and a NISP (Near-Infrared Spectro Photometer) as shown in Figure 45. 32)
The VIS (visible imager) instrument is optimized to register resolved images of galaxies in the 550-900 nm passband. 33) The VIS nominal survey images have a 10 σ extended source detection limit of AB 24.5 magnitude and are used to determine the shapes of at least 30 galaxies per arcmin2 over the survey area.
The VIS instrument consists of a CCD based FPA (Focal Plane Array) employing one wide visible passband, a shutter mechanism to close the optical path for read out and dark calibration, and a calibration unit for flat field measurements. 34) The FPA supports 6 x 6 CCDs (4 k x 4 k pixels each) with 0.10 arcsec pixel plate scale, giving a geometric field of greater than 0.5 deg2 including the gaps between the detectors. The VIS data processing and instrument control units are mounted in the spacecraft service module. The VIS central data processing unit collects data from 144 CCD quadrants, arranges all the pixels in the correct order and compresses this very large image (24 k x 24 k), in approximately 250 seconds. The VIS power and mechanisms control unit activates the shutter and the calibration unit. To have full control over the sources of systematic errors no additional VIS image processing will be done on board, all CCD data is transferred to ground.
550 – 900 nm
System PSF (Point Spread Function) size
≤0.18 arcsec full width half maximum at 800 nm
System PSF ellipticity
≤15% using a quadrupole definition
FOV (Field of View)
CCD pixel sampling
Detector cosmetics including cosmic rays
≤3% of bad pixels per exposure
Linearity post calibration
Distortion post calibration
≤0.005% on a scale of 4 arcmin
mAB ≥24.5 at 10 s in 3 exposures for galaxy size 0.3 arcsec
≤20% of the Zodiacal light background at Ecliptic Poles
15000 deg2 over a nominal mission with 85% efficiency
6 years including commissioning
Shear systematic bias allocation
additive σsys ≤2 x 10–4; multiplicative ≤2 x 10-3
Science aims: The core task of VIS is to enable Weak Lensing measurements. The dark matter (and ordinary matter) aggregates under the influence of gravity as the Universe expands. These overdensities deflect light differentially so that the light from background objects is distorted, and they appear to have a measurable change in ellipticity. In general there is only mild distortion, corresponding to weak gravitational lensing. The mass distribution can be inferred from statistical averages of the shapes of background galaxies distorted by this effect, enabling Euclid to map dark matter. By using galaxies further and further away, the rate at which the aggregation has occurred can be characterized. This is directly affected by the expansion history of the Universe, which appears at more recent times to be increasingly driven by dark energy, so the characteristics of the dark energy can consequently also be constrained.
FPA (Focal Plane Array): Photons within the broad red bandpass (550–900 nm) are detected by the array of 36 CCDs, each of which is a CCD273-8415,16 specifically designed for VIS and manufactured by e2v Technologies. The CCDs are located in a 6 x 6 matrix on the front of the FPA. Close butting of the CCDs provides a >90% filling fraction of active Si.
The FPA has dimensions of ~0.45m on each side. The 36 CCDs are held in a Silicon Carbide (SiC) structure. The detector array is maintained relative to the optical focal plane with tight tolerances to ensure image quality. There is a separate block of electronics which digitize the signals from the CCDs, and is supported separately, with only the CCD electrical flexible interconnects between them (Figure 50). The electronics block holds twelve Readout Electronics (ROE – one for three CCDs), and their closely coupled power supply units (R-PSU, one per ROE). Within the support structure for the ROEs are thermal shields to isolate the cold CCDs from the warm ROEs. A radiator to space maintains the ROE thermal environment. The detector block with the 36 CCDs is maintained at a temperature of 150–155 K by the PLM environment.
The detection chain consists of the CCDs, ROEs and their associated R-PSUs. The architecture of the chain has been set up to ensure sufficient redundancy, while minimizing the use of system resources. Manufacturability, testability and ease of access were important considerations. The tradeoff identified the optimal configuration as one ROE supporting three CCDs, each with four video chains (Figure 47), each with its own power supply unit. In order to minimize system noise levels, the power supply for each ROE is accommodated close to it on the outside of the Electronics Block. A single clocking and bias generation circuit is implemented for each CCD half. Loss of one ROE results in loss of <10% of the focal plane, and the consequent thermal perturbations are manageable. Within each ROE it is envisaged that individual CCDs may be lost without loss of the entire unit, providing further redundancy.
The CCDs are read out through four readout nodes at a rate of 70 kpix s–1. Analog signals are converted to a 16 bit resolution. In order to maintain thermal stability, all circuitry remains powered during exposures. Care is taken in the design of mixed signal circuitry handling very low level analogue inputs, to prevent cross-talk and other noise pick-up: multi-layer printed circuit boards are used with separate ground planes for analogue and digital functions. System grounding and decoupling is carefully planned to prevent circulating currents in ground lines from introducing noise sources. All of the CCDs are read out synchronously, removing electrical co-interference that could result from a slew of non-synchronized clocks; an LVDS (Low-Voltage Differential Signaling) interface (Figure 49) is used for the synchronization.
Data are transmitted through a SpaceWire port to the payload data handling unit (Figure 49), with SpaceWire communication and command decoding, together with other digital functions such as clock sequence generation carried out in a single space-qualified field-programmable gate array (FPGA) per ROE. The packaging of the ROE and PSU electronics is designed to optimize conductive thermal paths while minimizing the parasitic heat conduction to the CCDs.
Shutter: A shutter is located in front of the FPA to block the light to the detector array while the detectors are not making exposures or reading them out. This is a momentum-compensated (linear and angular) mechanism in order to minimize any disturbances to the spacecraft and the NISP instrument during actuation. It opens and closes within 10 seconds. The mechanism is electrically cold-redundant. The previously envisaged launch lock is now considered unnecessary and, pending positive results from testing, will be removed. The shutter does not seal against any Payload Module structure, and therefore scattered light paths require careful analysis. Surface treatments for the shutter minimize scattered light when it is opening and closing.
Calibration Unit: A calibration unit is provided to flood the FPA with light at different wavelengths within the VIS passband. CCD flat fields taken with this unit allow pixel-pixel variation to be measured as a function of wavelength. It is not required to provide high levels of stability or of large-scale spatial uniformity, as the photometric throughput is calibrated from stellar sources during routine observations, so a simple lens projection within the baffle provides sufficient uniformity and control of out-of-field light. The smoothest flat fields are at ~750 nm. While the wavelength dependence of the CCD flat field is slow, the number of independent illumination sources has been increased from 3 to 6 to ensure its adequate characterization.
There is no shutter for the calibration unit. Flat field calibrations therefore have the sky signal included, but because they are short exposures, and because many flat fields are combined to produce a master flat, this simple solution is acceptable. The calibration unit is electrically cold-redundant.
CDPU (Command and Data Processing Unit): The CDPU in the Service Module controls the instrument, transitioning between the different instrument modes and sequencing the operations within exposures, and monitoring instrument status to generate the housekeeping data. It also takes the science data from the ROEs, losslessly-compressing it and buffering it before transfer to the spacecraft bulk memory (MMU). It consists of a Maxwell SCS750 PowerPC triple-voting processing unit which performs the compression and science packet generation, a data routing board to handle the instrument status and the science data from the ROEs, power routing hardware to the PMCU and a multiplexer board to interface the 12 ROEs to both halves of the unit. The CDPU is dual-redundant except for the multiplexer board (Figure 49).
Power and Mechanism Control Unit: The PMCU provides power to the Calibration Unit and the Shutter, and controls its opening and closing. It also accepts housekeeping data from the shutter and calibration unit, and heater power to the FPA to ensure an appropriate thermal environment. The PMCU is also dual-redundant.
VIS operations and calibration:
VIS is designed to be simple to operate because this promotes the stability needed for weak lensing measurements. Almost all of the observations are carried out with a 565 second exposure time, with the entire focal plane active. The CCDs are then read out, the data are digitized, buffered and compressed, and the process repeated. The Euclid Reference Survey covers 15000 deg2 for the Wide Survey and ~40 deg2 for the Deep Survey and four separate exposures are made for each field, with displacements of 100 arcsec between them (with an additional lateral 50 arcsec for the fourth exposure). This is in order to cover gaps in the detector matrix, to permit some recovery of the spatial resolution, to minimize radiation damage impact on the data and to allow cosmic rays to be identified. This results in 50% of the sky being observed in four exposures, and another 47% with three, because of the gaps. Optimizations of the Reference Survey are currently being considered, and this may lead to a different total survey area, more exposures per field and different size displacements between them. However, any changes are required to be compatible with the current operating capabilities of the instruments and satellite.
The array takes some 80 seconds to read out in total. The VIS exposures take place during the spectroscopic exposures of NISP which have the same duration. After this, the time during the NISP photometric exposures is limited for science observations, because of pointing disturbances caused by the NISP filter wheel. However, shorter exposures will be taken during a small subset of NISP photometric exposures. These add dynamic range, improve sampling and assist in cosmic ray elimination: one or two of these short exposures can be included within the telemetry and shutter lifetime budgets. The time occupied by the NISP photometric exposures will mainly be used for VIS calibrations, such as flat and bias fields and dark exposures. Dark exposures will be of three types: in the first the dark current in the detectors (which is extremely low) can be measured, together with hot pixels (which will be relatively few given the cold operational temperature of the CCD); in the second a few lines of charge will be injected electrically into the CCD, and in the third charge will be injected over the whole region of the CCD and the CCD clocked backwards and forwards in a “pocket-pumping” mode.
Flat field calibrations are made with the Calibration Unit. Because of possible cross-contamination with NISP, these will be done at the end of the sequence of four exposures just before a spacecraft slew. The calibration exposures are short (10 seconds), incurring no time overhead.
Linearity calibrations require a slightly different operational sequence, with different durations for each of the four exposures. In order not to inordinately constrain the shutter repeatability, the shutter will open while the CCD is being read out continuously, after which the readout will stop for a precise duration set by the synchronization timing in VIS, before the readout begins again and the shutter closes. This will generate stellar images superimposed on illuminated strips in the image, caused by reading out when the shutter is open. These can be subtracted to produce accurate estimates of the flux in the image, and hence to determine the linearity.
NISP (Near Infrared Spectro Photometer)
NISP is one of the two Euclid instruments and is operating in the near-IR spectral region (900-2000 nm) as a photometer and spectrometer. The instrument is composed of:
- a cold (135 K) optomechanical subsystem consisting of a Silicon carbide structure, an optical assembly (corrector and camera lens), a filter wheel mechanism, a grism wheel mechanism, a calibration unit and a thermal control system
- a detection subsystem based on a mosaic of 16 HAWAII2RG cooled to 95 K with their front-end readout electronic cooled to 140 K, integrated on a mechanical focal plane structure made with molybdenum and aluminum. The detection subsystem is mounted on the optomechanical subsystem structure
- a warm electronic subsystem (280 K) composed of a data processing / detector control unit and of an instrument control unit that interfaces with the spacecraft via a 1553 bus for command and control and via Spacewire links for science data.
Euclid will carry out an imaging and spectroscopic wide survey of the entire extra-galactic sky (15000 deg2) along with a deep survey covering at least 40 deg2. To achieve these science objectives, the current Euclid reference design consists of a wide field telescope to be placed in L2 orbit by a Soyuz launch with a 6 years’ mission lifetime. The payload consists of a 1.2 m diameter 3-mirror telescope with two channels: a VISible imaging channel (VIS) and a NISP (Near Infrared Spectrometer and Photometer) channel. Both instruments observe simultaneously the same Field of View (FOV) on the sky and the system design is optimized for a sky survey in a step-and-stare tiling mode. 35) 36)
The NISP Instrument is operating in the 920-2000 nm range at a temperature lower than 140K, except for detectors, which are cooled down to ~95 K or below. The warm electronics will be located in the service module, at room temperature (around 20°C). The NISP instrument has two main observing modes: the photometric mode, for the acquisition of images with broad band filters, and the spectroscopic mode, for the acquisition of slitless dispersed images on the detectors.
In the photometer mode the NISP instrument images the telescope light in the wavelength range from 920 - 2000 nm (Y, J, H bands). The spatial sampling is required to be 0.3 arcsec per pixel. The FOV of the instrument is 0.55deg2 having a rectangular shape of 0.763º x 0.722º. In the spectrometer mode the light of the observed target is dispersed by means of grisms covering the wavelength range of 950 – 1850 nm. In order to provide a flat resolution over the specified wavelength range, four grisms are mounted in a wheel. These four grisms yield three dispersion directions tilted against each other by 90° in order to reduce confusion from overlapping (due to slitless observing mode). The field and waveband definitions used in the individual configurations for spectroscopy and photometry are:
• Three photometric bands: Y-bBand: 950 - 1192 nm, J-band: 1192 - 1544 nm, H-band: 1544 – 2000 nm.
• Four slitless spectroscopic bands:
- Red 0°; 90° and 180° dispersion: 1250 - 1850 nm
- Blue 0° dispersion: 920 -1300 nm.
The spectral resolution shall be higher than 250 for a one arcsec homogenous illumination object size. For such an object, the flux limit in spectroscopy shall be lower than 2 x 10-16 erg·cm-2·s-1 at 1600 nm wavelength. As with all slitless spectrographs, the real resolution varies with the object size (the smaller the size is, higher the resolution is). The image quality of the instrument in flight shall deliver a 50% radius encircled energy better than 0.3 arcsec and a 80% one better than 0.7 arcsec. There is a variation due to diffraction with the wavelength.
The NISP budgets are presently the following:
The instrument sits in a box of 1.0 x 0.6 x 0.5 m
The total mass of the instrument is 155 kg
The maximum power consumption is 178 W
The instrument will produce 290 GBit of data per day.
European Contributor countries for NISP are: France, Italy, Germany, Spain, Denmark and Norway, ESA for the engineering detectors and USA (NASA) for the flight detectors.
The NISP instrument consists of three main Assemblies:
• The NI-OMA (Opto-Mechanical Assembly), composed of the Mechanical Support Structure (NI-SA) and its thermal control (NI-TC), the Optical elements (NI-OA), the Filter Wheel Assembly (NI-FWA), the Grism Wheel Assembly (NI-GWA), the Calibration Unit (NI-CU). The NI-OMA structure supports the Optical elements, the calibration unit, the Filter and Grism Wheel Units and the detection system. It provides the thermo-mechanical interface towards the Euclid PLM.
• The NI-DS (Detector System Assembly) is composed by the Focal Plane Assembly (NI-FPA; the mechanical part of NI-DS) and by the Sensor Chip System (NI-SCS) compose). The NI-DS comprises the 16 H2RG detectors and associated 16 ASICS (Sidecars), passively cooled at operating temperature (<100K for the detectors; 140K for the ASICS Sidecar). Thermal stabilization of the detector is "naturally" obtained thanks to the very good thermal stability provided by the Euclid PLM at the NISP interfaces.
• The Warm Electronics Assembly (NI-WE), composed of the Instrument Data Processing Unit and Control Unit (NI-DPU/DCU), and the Instrument Control Unit (NI-ICU). The NI-ICU is managing the commanding and the control of the instrument. It is interfaced with the satellite via a 1553 bus. The NI-DPU/DCU controls the Sensor Chip System and basic image processing such as co-adding (DCU function) and the science onboard data processing, the compression and transfer of scientific data to the S/C Mass Memory using Spacewire links (DPU function). The NI-DPU/DCU functions are regrouped in a single mechanical box for controlling eight detectors. There are two NIDPU/DCU boxes.
The NI-DS is screwed on the NI-OMA (SiC panel to SiC panel). The NI-OMA+NI-DS is located in the Euclid spacecraft Payload module in a cold environment (130 K). The Warm electronic are located in the Euclid spacecraft Service Module at room temperature. A dedicated harness interconnects the NI-OMA, the NI-DS, the NI-WE and different spacecraft electronics boxes.
An overview of NISP subsystems is shown in the Figures 51 and 52. The overall throughput of the NISP instrument will enable scientists to measure photometric and spectroscopic redshifts of galaxies with sufficient accuracy. The NISP photometer will be able to get a signal-to-noise ratio of at least 5 down to magnitude 24.0 in about 100 seconds per filter. The NISP spectrograph will provide redshift of about 30 million emission line galaxies over the redshift range 0.7 to 2.0 in about 4000 seconds.
NISP successfully passed the Critical Design Review in November 2016 and is now en route for building the flight model.
The NISP Calibration Unit allows in-flight calibration of the infrared detector array. The unit provides stable illumination of the image plane at five different infrared wavelengths, allowing for small-scale flat field calibration and measurements of the detector linearity. The design is relatively simple with 2 x 5 LEDs (one nominal and redundant per wavelength) inside the calibration unit pointing to a small patch of Spectralon PTFE material. The Lambertian scattered light is directly pointed towards the detector through a set of baffles without going through any of the optics. Control of the LED brightness and thus received flux is performed by current and duty cycle regulation of the drive signal in the instrument control unit (ICU). As the unit operates under cryogenic conditions, finding and qualifying suitable LEDs has become a major challenge, especially for longer wavelengths >1.6um.
Previous work has shown that commercially available off-the-shelf devices are not usable in our case. We have therefore procured the raw LED dies for the required wavelengths and submitted them to a uniform and controlled assembly and packaging process. The full formal space qualification of the LEDs is expected to take place well into the 2017. Nevertheless, initial tests of proofing devices, especially under cryogenic conditions, have confirmed that the LEDs are highly durable. The structural model of the calibration unit has passed vibration testing to confirm the validity of the mechanical design. Current development steps include long-term cryogenic storage and lifetime cycle-testing of the LEDs as well as fine-tuning of the interior optical layout of the calibration unit.
The NISP Warm Electronics:
The NISP warm electronics are composed of two Data Processing Units (NI-DPU) and one Instrument Control Unit (NI-ICU).
Data Processing Unit (NI-DPU): The full system is shown in the electrical drawing reported in figure ”NISP functional electrical scheme”, each DPU unit is mounted around a shared Compact PCI bus structure with the exception of the main power supply system and the 8 x DCU boards each one managing one SCE/SCA detection pair. The two Data Processing Units (NI-DPU) are both including:
- 8 x Detector Control Units (DCU) that provide clock and power to the readout electronic. In addition, these units will preprocess the data using FPGA boards
- Central Processor Unit that finalize the on board data processing, compress and format the data sending them via SpaceWire link to the central spacecraft memory.
Each DPU is hosting the following boards:
- CPCI Data Processors based with two Maxwell SCS750
- CPCI Data Routers
- CPCI Data Buffer
- Power Supply.
Except for the DCUs, all the boards in the DPU are cold redundant. Each DCU receives the data of one 2 k x 2 k detector from one SIDECAR and performs the low level pre-processing foreseen in HW consisting of:
- Group of frames averaging
- Telemetry extraction
- Extraction of sub-sets of programmed raw detector lines to be used on ground for monitoring purposes
- Co-added Frame data buffering and Spacewire transmission to Data Buffer Boards.
At this interface level redundancy is supported by the full duplication of DPU hardware. Averaged data groups can be configured to be transmitted to one of the Data Buffer Boards available in each DPU, this is accomplished by duplication of the 8 x Spacewire (SpW) links. The same redundant configuration is available at each DCU TMTC interface bus: the control link based on the RS485 standard can be configured to be driven by one of the two available CPCI data router boards.
The Data Buffer board allows the storage of up to 46+46 averaged frames with telemetry and ancillary data from the 8 x handled detection channels in double-buffering mode to ease the further data processing.
A functional demonstrator model of the DPU (with one Maxwell board, one DCU board and one Data Buffer board) has been manufactured and tested with a first version of the application SW.
Instrument Control Unit Hardware (NI-ICU):
• One Instrument Control Unit (NI-ICU) in charge of:
- Interface with the spacecraft via a 1553 bus for the commanding of the NISP
- Housekeeping management
- General power supply
- Command signal to the cryo-mechanism, to the 5 LED's calibration source and to the NI-OMA and NI-DS heaters (heater constant power is applied in open loop with power setpoint determined by ground operators).
The ICU has two sections (nominal and redundant), which are identical and operate in cold redundancy. Each NI-ICU (N or R) is divided in three boards, all of them interconnected by means of a backplane motherboard:
• LCPS (Low Voltage Power Supply): provides DC/DC converters to generate all the necessary secondary power supplies, as well as the 1553 transceivers for the NI-DPU link (1553 controller logic is actually located in the CPDU board.
• CDPU (Central Data Processing Unit): contains a LEON2-FT CPU embedded in a MDPA ASIC, which manages all the functions of the NI-ICU. This module also includes a RTAX FPGA that extends the functionalities of the MPDA, with the main aim of interfacing with the DAS module. The 1553 transceivers for the S/C link and the test connector are also located in this board.
• DAS (Data Acquisition System): this board features all the analogue acquisition and driving electronics that are used to interface with the
rest of the NISP instrument, including the filter and grism wheels, heaters, temperature sensors and calibration LEDs.
The warm electronic will be placed in the service module of the spacecraft at ambient temperature. A harness under Prime contractor responsibility provides the link with the NI-OMA and NI-DS. This cable will carry LVDS signal for scientific data, housekeeping signals, control command and power supply for equipment.
The main challenge of the warm electronics is to process the amount of data delivered by the detector during the integration of the following frame. The onboard data processing is complexified by the fact that the amount of downlink accepted to ground is very limited. Only final frames can be sent to ground, but as described later HgCdTe detectors deliver lots of frame to achieve final science performances.
The ICU Application SW (ASW) is devoted to manage the satellite/platform interface, the ICU/DPU interface and all the functionalities related to instrument commanding. It is in charge of the following functions:
- TM/TC exchange with S/C CDMU on Nom/Red 1553 link
- TC decoding and distribution to NISP instrument subunits: NI-FWA electronics, NI-GWA electronics, NI-CU electronics, NI-TC electronics, NI-DPU/DCU/SCE
- Global instrument monitoring and HK packet generation
- Time management, propagation of OBT to the DPUs, TM time tagging and high level instrument internal synchronizations
- NISP operating mode management
- Execution of autonomous functions and FDIR algorithms and processes
- Control of the calibration unit (ON/OFF, intensity level and current absorption handling)
- Control of filter wheels (reference position, position switch)
- Thermal control (open loop) of the NI-FPA detector cold-plate through temperature sensors and heaters
- High level handling of macro-commands submission to detector system
- Thermal control of the NI-OMA through temperature sensors and heaters
- Management of software maintenance, memory patch and dump (EEPROM patching is performed by the Boot SW)
Instrument Control Unit Hardware Application Software (ICU ASW): The ICU ASW is based on RTEMS real-time operative system, in the space-qualified version by EDISOFT. Telecommand and Telemetry packets will be based on the Packet Utilization Services (PUS) standard, with the implementation of services tailored to the specific needs of the Euclid project.
A coordinated effort is in place with the Prime of the Spacecraft and with the VIS CDPU ASW team in order to ensure a common approach and, as far as possible, implementation of services between NISP and VIS, so that the SW interfaces with the Spacecraft can be simplified and standardized. The interface with the DPU is based on a second MIL-STD-1553 bus, similar to the one used between the Spacecraft and the Euclid instruments, in which the DPUs are configured as Remote Terminals and the ICU as the Bus Controller. The SW interface and communication protocol is an internally defined one, with the aim of reducing as much as possible the load of management tasks on the DPU processor, since this resource is needed for the demanding data processing tasks. The ICU ASW will decode the PUS formatted high level TCs and implement the low level sequences towards the two active DPUs.
Onboard Data Processing:
The routine science NISP operations foresee 20 fields of observation per day, each one composed by four dithers where four exposures each are taken, for a total maximum assigned science data telemetry of 290 Gbit/day. A dark exposure is taken during the spacecraft slew. This limited amount of allowed telemetry, together with the huge number of frames typically produced by IR detectors operated in multi-accumulation mode, have as a consequence the need to perform part of the processing pipeline directly on-board and to transfer to ground only the final products for each exposure. Moreover, final data must be also compressed to fit with the assigned telemetry throughput. A number of readout modes have been envisioned for the NISP instrument in the various development stages. Multi-accumulation (MACC) is at the moment the preferred modes for both spectrograph and photometer readout. MACC readout is a peculiar Up the Ramp process (UTR) where detector readouts are grouped in contiguous sets of readouts uniformly placed along the accumulated charge ramp. The data processing can be split into two main stages: stage 1 is implemented in the NI-DCU, directly interfaced to the SCS, where the first static basic pre-processing steps are performed, while stage 2, performed in NI-DPU, is devoted to the processing and compression of the final data frames.
The software architecture is dictated by the science requirements and depends on the hardware organization, in terms of DPU power, internal memory, available links with both DCU and SVM. During the previous different phases of the project various processing possibilities were analyzed, in terms of computational complexity, DPU internal memory needs, amount of final data and quality of results. As a result, the foreseen on-board pre-processing pipeline7 will be as depicted in Figure 6-2 where the violet blocks represent the operations performed inside the DPUs. This operational flow is sequentially repeated to cover the 17 exposures (4 spectro + 12 photo + 1 dark) to be performed during each single cycle.
At the end of the pipeline described in Figure 6-2 final generated data, with their associated header and metadata to properly re-construct images on ground, are transmitted to the spacecraft Mass Memory Unit, to be downlinked to ground. The most crucial constraint for the on-board processing is given by the need to keep up with the on-going observations, so the previous work was mostly concentrated to verify the algorithm performances, especially in terms of time spent. Current development steps include the integration of the data processing with the overall DPU Application Software structure.
Optical performances: The following figure shows the evaluation of the Encircled Energy compared to required values (the maximum radius of the Encircled Energy (EE) at 80% and at 50% shall be lower than the specified ones. The Figure 58 shows that NISP complies with its optical requirement.
IR detector QE and noise performances: The detector QE and the detector noise are a major concern for the future NISP performance. One important goal is to ensure not only mean specified values but also that 95% of pixels meet these requirements to ensure the efficiency of coverage in the full survey.
The homogeneity of the pixel response is excellent. The CDS readout noise shows the same performances demonstrated during the NRE phase. The mean dark has been shown to be very low around 0,005 e–/pix/s at 100 K with a sharp distribution and well inside NISP specifications. From these first tests on Flight parts, the project can expect a very high quality NIR Focal Plane.
During the 6 years of the survey, Euclid will collect more more than 500,000 visible (VIS) and near infrared images (NISP imaging and NISP spectroscopy) that will be transferred to Earth on a daily basis cadence. 37)
The Euclid space images will be complemented by visible imaging data from ground-based telescopes, covering the same sky as the Euclid mission, in order to derive photometric redshifts (distance measurements) of lensed sources. Euclid space and ground data will provide photometry of each galaxy in 7 different filters ranging from 460 nm to 2000 nm (g,r,i and z bands from the ground, Y, J and H from Euclid) down to 24.0 to 24.5 AB magnitude. Overall, the Euclid input images represent several million of images and about 30 Petabytes of image data.
In addition to the data volume one challenge of the science ground segment is to process and analyze heterogeneous data sets that mix together space and ground based images. They will be obtained with several telescopes providing visible or near infrared data with different depth and resolution in order to derive astrometric, photometric, morphometric and spectroscopic parameters of sources and possibly time domain information.
About 10 billion sources will be observed by Euclid, out of which more than 1 billion will be used for weak lensing, and about 30 million galaxy redshifts will be obtained. The science ground segment is a most challenging part of this mission and represents about 50% of the resources provided by the Euclid Consortium.
The ground segment activities are shared by ESA and the Euclid Consortium.
The Science Ground Segment (SGS) of the Euclid mission is composed of the combination of two independent sections: the ESA Science Operations Center (SOC), and the Euclid Consortium Science Ground Segment (EC SGS). SOC will be the single interface to the ESA Mission Operations Center (MOC), and hence to the Euclid Operations Ground Segment (OGS). The SOC is also in charge of the survey planning, managing the downlinked data (i.e. performing quick look, daily quality reports and telemetry editing) and providing the EC with the data necessary to perform further processing of the science data.
The scientific processing of the data, down to the production of the scientific results, is the responsibility of the Science Ground Segment managed by the Euclid Consortium. The processing activity will occur in national Science Data Centers (SDCs, Figure 61). Two SDCs will host the Instrument Operations Teams (IOTs), one for each of the instruments, which will perform the monitoring of instrument performance. Other SDCs will be in charge of providing large external data sets obtained from ground based surveys complementing the Euclid data.
The SGS will be designed consistently with the principle of maximizing the impact of Euclid in both primary and legacy sciences. For this purpose, one of the drivers in the design will be making data available publicly as soon as possible. The SGS will therefore be responsible for the archive and the production of the official Euclid data releases.
1) ”Euclid Science Goals,” ESA, URL: http://sci.esa.int/euclid/42267-science/
2) ”Euclid Mapping the geometry of the dark Universe,”Definition study report, ESA, ESA/SRE(2011)12, September 2011 (Revision 1), URL: http://sci.esa.int/science-e/www/object/doc.cfm?fobjectid=48980
3) ”Expansion history of the Universe,” ESA, 5 March 2010, URL: http://sci.esa.int/euclid/46673-expansion-history-of-the-universe/
4) ”Week lensing effects,” ESA, 23 July 2014, URL: http://sci.esa.int/euclid/46675-weak-lensing-effects/
6) ”Scientists of the Euclid Consortium announce the release of the largest simulated galaxy catalog ever built,” Joint EC, ICE (IEEC-CSIC), PIC, CSCS and University of Zurich Press Release, 07 June 2017, URL: http://www.euclid-ec.org/?page_id=4133
7) ”Three dark fields for Euclid's deep survey,” ESA, 12 June 2019, URL: http://sci.esa.int/euclid/61403-three-dark-fields-for-euclid-deep-survey/
8) Giuseppe D. Racca, René Laureijs, Luca Stagnaro, Jean-Christophe Salvignol, José Lorenzo Alvarez, Gonzalo Saavedra Criado, Luis Gaspar Venancio, Alex Short, Paolo Strada, Tobias Bönke, Cyril Colombo, Adriano Calvi, Elena Maiorano, Osvaldo Piersanti, Sylvain Prezelus, Pierluigi Rosato, Jacques Pinel, Hans Rozemeijer, Valentina Lesna, Paolo Musi, Marco Sias, Alberto Anselmi, Vincent Cazaubiel, Ludovic Vaillon, Yannick Mellier, Jérôme Amiaux, Michel Berthé, Marc Sauvage, Ruyman Azzollini, Mark Cropper, Sabrina Pottinger, Knud Jahnke, Anne Ealet, Thierry Maciaszek, Fabio Pasian, Andrea Zacchei, Roberto Scaramella, John Hoar, Ralf Kohley, Roland Vavrek, Andreas Rudolph, Micha Schmidt, ”The Euclid mission design,” Presented at the SPIE Astronomical Telescopes and Instrumentation conference in Edinburgh, Scotland, United Kingdom, 6 June- 1 July 2016, DOI: 10.1117/12.2230762, URL: https://arxiv.org/ftp/arxiv/papers/1610/1610.05508.pdf
9) ”The Fingertip Galaxy: Reflecting Euclid in art,” ESA Science & Exploration, 01 July 2022, URL: https://www.esa.int/ESA_Multimedia/Videos/2022/07/The_Fingertip_Galaxy_Reflecting_Euclid_in_art
10) ”Euclid gains solar power and protection,” ESA Science & Exploration, 01 June 2022, URL: https://www.esa.int/ESA_Multimedia/Images/2022/06/Euclid_gains_solar_power_and_protection
11) ”Euclid spacecraft grows as eyes meet brain,” ESA Science & Exploration, 30 March 2022, URL: https://www.esa.int/Science_Exploration/Space_Science/Euclid_spacecraft_grows_as_eyes_meet_brain
12) ”Euclid spacecraft integration,” ESA Science & Exploration, 27 October 2021, URL: https://www.esa.int/ESA_Multimedia/Videos/2021/10/Euclid_spacecraft_integration
13) ”Euclid Telescope completes space test in Belgium,” ESA Science & Exploration, 13 October 2021, URL: https://www.esa.int/ESA_Multimedia/Videos/2021/10/Euclid_Telescope_completes_space_test_in_Belgium
14) ”Tiger Team solves mystery of Euclid’s galaxy speed camera,” ESA Enabling & Support, 29 September 2021, URL: https://www.esa.int/Enabling_Support/Space_Engineering_Technology/Tiger_Team_solves_mystery_of_Euclid_s_galaxy_speed_camera
15) ”Euclid telescope inspected,” ESA Science & Exploration, 29 September 2021, URL: https://www.esa.int/About_Us/Week_in_images/Week_in_images_27_September_-_1_October_2021
16) ”Instruments installed on Euclid spacecraft,” ESA Science & Exploration, 21 December 2020, URL: https://www.esa.int/ESA_Multimedia/Images/2020/12/Instruments_installed_on_Euclid_spacecraft
17) ”Thales Alenia Space delivers the high gain antenna for the Euclid space telescope,” Thales Group Press Release, 10 December 2020, URL: https://www.thalesgroup.com/en/worldwide/space/press_release/thales-alenia-space-delivers-high-gain-antenna-euclid-space-telescope
18) ”The Euclid space telescope is coming together,” ESA Science & Exploration, 9 July 2020, URL: https://www.esa.int/Science_Exploration/Space_Science/The_Euclid_space_telescope_is_coming_together
19) ” Airbus-built telescope for ESA’s Euclid mission takes shape,” Airbus, 19 November 2019, URL: https://www.airbus.com/newsroom/press-releases/en/2019/11/airbusbuilt-telescope-for-esas-euclid-mission-takes-shape.html
20) ”Cosmic stability - Tests confirm the Euclid mission has the thermal stability to investigate the dark Universe ,” ESA, 19 September 2019, URL: http://www.esa.int/spaceinimages/Images/2019/09/Structural_and_thermal_model_of_the_Euclid_satellite
21) ”NASA Delivers Hardware for ESA Dark Energy Mission,” NASA News, 23 July 2019, URL: https://www.jpl.nasa.gov/news/news.php?feature=7461&utm_source=iContact&utm_medium=email&utm_campaign=nasajpl&utm_content=Euclid-20190723-1
22) ”Key milestone for Euclid mission, now ready for final assembly,” ESA, 18 December 2018, URL: http://sci.esa.int/euclid/60994-key-milestone-for-euclid-mission-now-ready-for-final-assembly/
23) ”Euclid progresses with primary mirror delivery,” ESA Science & Technology, 15 November 2018: URL: http://sci.esa.int/euclid/60936-euclid-progresses-with-primary-mirror-delivery/
24) Stephen Clark, ”Detector trouble expected to delay ESA’s Euclid dark energy mission,” Spaceflight Now, 23 October 2017, URL: https://spaceflightnow.com/2017/10/23/detector-trouble-expected-to-delay-esas-euclid-dark-energy-mission/
25) ”Detector delivery marks another Euclid milestone,” Euclid, 26 April 2017, URL: http://sci.esa.int/euclid/59050-detector-delivery-marks-another-euclid-milestone/
26) ”First Euclid flight hardware delivered,” Euclid, 07 Feb. 2017, URL: http://sci.esa.int/euclid/58777-first-euclid-flight-hardware-delivered/
27) ”First Euclid flight hardware delivered - VIS detectors,” The Euclid Consortium Newsletter - Spring 2017, URL: https://www.euclid-ec.org/Documents/Newsletter/EC-Newsletter_issue07.pdf
28) ”Euclid dark Universe mission ready to take shape,” Euclid, 17 Dec. 2015, URL: http://sci.esa.int/euclid/57039-euclid-dark-universe-mission-ready-to-take-shape/
29) ”Multilateral agreements signed at SPC (Science Program Committee) meeting,” 29, Nov. 2013, URL: http://sci.esa.int/cosmic-vision/53274-multilateral-agreements-signed-at-spc-meeting/
30) ”NASA Officially Joins ESA's 'Dark Universe' Mission,” NASA, 24 Jan. 2013, URL: https://www.nasa.gov/mission_pages/euclid/news/euclid20130124.html
32) R. Sánchez Maestro, A. Agenjo Díaz, C. A. Ardura Lumeras, L. Meijer, M. Saponara, C. Rossod, G. Saavedra Criado, ”Euclid Dark Universe Mission – High stability and pointing performance control,” Proceedings of the 70th IAC (International Astronautical Congress), Washington DC, USA, 21-25 October 2019, paper: IAC-19-C1.6.1, URL: https://iafastro.directory/iac/proceedings/IAC-19/IAC-19/C1/6/manuscripts/IAC-19,C1,6,1,x54287.pdf
33) Mark Cropper, S. Pottinger, S. Niemi, R. Azzollini, J. Denniston, M. Szafraniec, S. Awan, Y. Mellier, M. Berthe, J. Martignac, C. Cara, A.-M. di Giorgio, A. Sciortino, E. Bozzo, L. Genolet, R. Cole, A. Philippon, M. Hailey, T. Hunt, I. Swindells, A. Holland, J. Gow, N. Murray, D. Hall, J. Skottfelt, J. Amiaux, R. Laureijs, G. Racca, J.-C. Salvignol, A. Short, J. Lorenzo Alvarez, T. Kitching, H. Hoekstra, R. Massey, H. Israel, the Euclid collaboration, ”VIS: the visible imager for Euclid,” Proceedings of SPIE, Vol. 9904, 'Space Telescopes and Instrumentation 2016: Optical, Infrared, and Millimeter Wave,' 99040Q , July 19, 2016, DOI: 10.1117/12.2234739, URL: https://arxiv.org/ftp/arxiv/papers/1608/1608.08603.pdf
34) A. D. Short, D. Barry, M. Berthe, N. Boudin, O. Boulade, R. Cole, M. Cropper, L. Duvet, J. Endicott, L. Gaspar Venancio, J. Gow, P. Guttridge, D. Hall, A. Holland, H. Israel, R. Kohley, R. Laureijs, J. Lorenzo Alvarez, J. Martignac, J. Maskell, R. Massey, N. Murray, S.-M. Niemi, P. Pool, S. Pottinger, T. Prod'homme, G. Racca, J-C Salvignol, W. Suske, M. Szafraniec, P. Verhoeve, D. Walton, R. Wheeler, ”The Euclid VIS CCD detector design, development, and programme status,” Proceedings of SPIE, Volume 9154, 'High Energy, Optical, and Infrared Detectors for Astronomy VI', 91540R, 23 July 2014, doi: 10.1117/12.2057587, URL of abstract: https://doi.org/10.1117/12.2057587
35) Thierry Maciaszek, Anne Ealet, Knud Jahnke, Eric Prieto, Rémi Barbier, Bogna Kubik, Yannick Mellier, FlorentBeaumont, William Bon, Anne Bonefoi, Michael Carle, Amandine Caillat, Anne Costille, Doriane Dormoy, Franck Ducret, Christophe Fabron, Aurélien Febvre, Benjamin Foulon, Jose Garcia, Jean-Luc Gimenez, Emmanuel Grassi, Philippe Laurent, David Le Mignant, Laurent Martin, Christelle Rossin, Tony Pamplona, Patrice Sanchez, Sebastien Vives, Jean Claude Clémens, William Gillard, Mathieu Niclas, Aurélia Secroun, Benoit Serra, Jérome Amiaux, Jean Christophe Barrière, Michel Berthe, Cyrille Rosset, Juan Francisco Macias-Perez, Natalia Auricchio, Adriano De Rosa, Enrico Franceschi, Gian Paolo Guizzo, Gianluca Morgante, Francesca Sortino, Massimo Trifoglio, Luca Valenziano, Laura Patrizii, T. Chiarusi, F. Fornari, F. Giacomini, A. Margiotta, N. Mauri, L. Pasqualini, G. Sirri, M. Spurio, M. Tenti, R. Travaglini, Stefano Dusini, F. Dal Corso, F. Laudisio, C. Sirignano, L.Stanco, S.Ventura, Enrico Borsato, Carlotta Bonoli, Favio Bortoletto, Andrea Balestra, Maurizio D'Alessandro, Eduardo MedinaCeli, Ruben Farinelli, Leonardo Corcione, Sebastiano Ligori, Frank Grupp, Carolin Wimmer, Felix Hormuth, Gregor Seidel, Stefanie Wachter, Cristobal Padilla, Mikel Lamensans, Ricard Casas, Ivan Lloro, Rafael Toledo-Moreo, Jaime Gomez, Carlos Colodro-Conde, David Lizán, Jose Javier Diaz, Per B. Lilje, Corinne Toulouse-Aastrup, Michael I. Andersen, Anton N. Sørensen, Peter Jakobsen, Allan Hornstrup, Niels-Christian Jessen, Cédric Thizy, Warren Holmes, Ulf Israelsson, Michael Seiffert, Augustyn Waczynski, René J. Laureijs, Giuseppe Racca, Jean-Christophe Salvignol, Tobias Boenke, Paolo Strada, ”Euclid Near Infrared Spectrometer and Photometer instrument concept and first test results obtained for different breadboards models at the end of phase C,” Proceedings of SPIE, June 2016, URL: https://www.duo.uio.no/bitstream/handle/10852/52728/Euclid-NISP-SPIE-JUN2016-final.pdf?sequence=1
The information compiled and edited in this article was provided by Herbert J. Kramer from his documentation of: ”Observation of the Earth and Its Environment: Survey of Missions and Sensors” (Springer Verlag) as well as many other sources after the publication of the 4th edition in 2002. - Comments and corrections to this article are always welcome for further updates (email@example.com).Spacecraft Payload Development Status Launch Instruments Ground Segment References Back to top