MMS (Magnetospheric MultiScale) ConstellationSpacecraft Launch Mission Status Sensor Complement Ground Segment References
MMS is a NASA solar-terrestrial probe constellation comprising four identically instrumented spacecraft that will use Earth's magnetosphere as a laboratory to study the microphysics of three fundamental plasma processes: magnetic reconnection, energetic particle acceleration, and turbulence. These processes occur in all astrophysical plasma systems but can be studied in situ only in our solar system and most efficiently only in Earth's magnetosphere, where they control the dynamics of the geospace environment and play an important role in the processes known as ”space weather.” 1) 2) 3) 4)
The fundamental plasma physics process of reconnection in the Earth's magnetosphere are to be monitored on temporal scales of milliseconds to seconds and on spacial scales of 10s to 100s of km. Three science objectives have been identified for the MMS mission. In priority order, these objectives are to:
• Determine the role played by electron inertial effects and turbulent dissipation in driving reconnection in the electron diffusion region
• Determine the rate of magnetic reconnection and the parameters that control it
• Determine the role played by ion inertial effects in the physics of reconnection.
The overall science objective is to investigate the physics of magnetic reconnection: 5)
- In the plasma universe magnetic fields connect and disconnect explosively transferring energy into the electrons and ions that make up the plasma.
- MMS will reveal for the first time the small-scale 3D structure and dynamics in the heart of reconnection regions occurring naturally in Earth’s geospace plasma environment.
- Only by measuring the behavior of the particles and fields in three-dimensions in the diffusion region can we learn fully how reconnection proceeds.
- The four MMS spacecraft will be placed “surgically” in a tetrahedral formation into the diffusion region.
Understanding the physics of reconnection:
- The most important goal of MMS is to conduct a definitive experiment to determine what causes magnetic field lines to reconnect in a collisionless plasma.
- Magnetic Reconnection is evident throughout the plasma universe
- Yet it occurs in the near vicinity of Earth. It can be studied internally by man-made probes using the Earth’s magnetosphere as a laboratory.
- The 4 spacecraft MMS flying in an adjustable pyramid-like formation through the core of these dynamic and impulsive energy conversion regions allows the 3D structure to be investigated.
- Through detailed measurements of the local plasmas and fields scientists will understand the physics that governs one of the most important drivers of space weather.
- ..... and learn how charged particles are energized on the sun and in astrophysical bodies throughout the universe.
The MMS mission employs four identically instrumented spinning spacecraft orbiting the Earth in a tetrahedral configuration to conduct definitive investigations of magnetic reconnection in key boundary regions of the Earth’s magnetosphere. The process of magnetic reconnection, which controls the flow of energy, mass, and momentum within and across plasma boundaries, occurs throughout the universe and is fundamental to our understanding of astrophysical and solar system plasmas. It is only in the Earth’s magnetosphere, however, that it is readily accessible for sustained study through the in situ measurement of plasma properties and of the electric and magnetic fields that govern the behavior of the plasmas.
Through high-resolution measurements made by each spacecraft, whose separations can be varied from tens of km to a few hundreds of kilometers, MMS will probe the crucial microscopic physics involved in these fundamental processes; determine the 3D geometry of the plasma, field, and current structures associated with them; and relate their micro-scale dimension to phenomena occurring on the mesoscale. By acquiring data simultaneously at multiple points in space, MMS will be able to differentiate between spatial variations and temporal evolution, thus removing the space-time ambiguity that has limited single-spacecraft studies of magnetospheric plasma processes.
The MMS mission is managed by the Heliophysics Division for NASA’s Science Mission Directorate at NASA/HQ. NASA/GSFC will build the four spacecraft and the intersatellite ranging and communication system. Southwest Research Institute (SwRI) of San Antonio, TX leads the science investigation and development of the instrument suite together with numerous partners, including the University of New Hampshire, NASA/GSFC, Johns Hopkins University /Applied Physics Laboratory (JHU/APL), LASP (Laboratory for Atmospheric and Space Physics) at the University of Colorado, Boulder, and international partners in Austria (IWF), Sweden (KTH and IRF-U), France (CETP) and Japan.
The technology requirements of the MMS mission call for:
• On-board propulsion
• Intersatellite communication
• Autonomous operation.
Project development status:
• In August 2013, the MMS mission is in Phase-D, Integration and Test.
• On August 31, 2012, NASA's MMS mission passed the SIR (System Integration Review) which deems a mission ready to integrate instruments onto the spacecraft. 6)
• In May 2005, NASA selected the SwRI instrument suite team to work with GSFC in the MMS project for the mission formulation. In May 2009, the project passed the preliminary design review. In August 2010, the project completed its mission critical design review (CDR). The C/D Phase of the project started in 2011. 7) 8)
The four spin-stabilized spacecraft are being developed and integrated at GSFC. Each satellite has an octagonal shape that is approximately 3.5 m wide and 1.2 m high. The satellites spin at 3 rpm during science operations. There are 8 deployable booms per satellite: four 60 m wire booms in the spin plane for electric field sensors, two 12.5 m booms in the axial plane for electric field sensors, and two 5 m booms in the spin plane for the magnetometers. 9) 10) 11) 12)
The aluminum structure has a modular design to simplify I&T (Integration & Testing) consisting of a propulsion assembly, separation system/thrust tube, instrument deck, and spacecraft deck.
ACS (Attitude Control Subsystem): The ACS keeps the spacecraft to within ±0.5º of the desired orientation during science operations and implements on-board closed loop maneuver control. The ACS sensor complement consists of a star tracker (ST) with four separate heads and two redundant DSS (Digital Sun Sensors), one being a cold backup unit. The four ST heads output four independent quaternions at 4 Hz (that is, 16 independent attitude measurements/s). Once per spin period (~20 sec), the DSS will output a pulse indicating sun-crossing through the sensor FOV slit and a measurement of the sun elevation from the body X-Y-plane (the +Z-axis is the nominal spin axis). 13)
Star sensors and sun sensors provide attitude data, and accelerometers provide acceleration and ΔV data. Thrusters are used as actuators. A GPS receiver on board each spacecraft provides absolute position information. In addition, each spacecraft employs an IRAS (Inter-spacecraft Ranging and Alarm System) to determine its location relative to the other three spacecraft.
The propulsion subsystem is a mono-propellant blowdown system with 12 thrusters sized to achieve both small formation maintenance maneuvers and large apogee raise maneuvers. Approximately 360 kg of propellant will be contained in four titanium tanks per spacecraft. 14)
EPS (Electrical Power System): The EPS is a 'direct energy transfer system' employing a battery dominated bus. Power to the spacecraft is supplied from 8 identical body-mounted solar array panels that are electrostatically and magnetically clean. The battery is sized to provide power during the 4 hour eclipses. - The thermal design is passive using thermostatically controlled heaters.
RF communications: Ground communications occur over a single S-band frequency for uplink to all four spacecraft and a single S-band frequency for downlink from all four spacecraft. Real-time coverage of all critical commands, including post launch separation and all maneuvers, will be accomplished through TDRSS (Tracking and Data Relay Satellite System) of NASA.
The spacecraft bus avionics performs command and telemetry processing, timing distribution, solar array regulation, battery charge management, and thruster control. Orbit determination is performed on-board using weak signal GPS processing. Each satellite including instruments, fuel, and margin has a mass of ~ 1,250 kg. The power budget at end of life with instruments and margin is approximately 318 W. The mission design life is 2 years.
Each MMS spacecraft is being developed using the standard GSFC protoflight testing approach. The first unit is being tested to qualification levels and the remaining units to acceptance levels. Design heritage from previous GSFC in-house development efforts are being used where possible, although each unit having heritage will go through the full design and test process. Commercially available components are being purchased competitively. Planned procurements include accelerometers, star cameras, sun sensors, batteries, solar arrays, transponders, thrusters, propellant tanks, and separation systems.
Spacecraft to instrument suite integration and constellation level testing will occur at GSFC. Each instrument suite will be integrated with the spacecraft bus to form the MMS observatory. Performance and environmental testing will be performed on each observatory. Additional testing will be performed in the stacked launch configuration.
Launch: The four MMS satellites were launched on March 13, 2015 (02:44:00 UTC) on an Atlas-5-421 vehicle. The launch provider was ULA, the launch site was the Cape Canaveral Air Force Station, FL, USA. 17) 18) 19)
Orbits of the constellation:
MMS is designed to fly four identical spin-stabilized spacecraft in a tetrahedral formation in a set of highly elliptical orbits.
Because reconnection manifests itself in the Earth's magnetosphere at two locations with differing scale sizes and magnetic field orientations, a two-phase orbit strategy has been developed to test the universality of the mechanisms at work and to better understand how it controls planetary space weather. Phase 1 will probe reconnection sites at the mid-latitude dayside magnetopause, while Phase 2 focuses on reconnection sites that occur within the nightside magnetic neutral sheet. 20) 21)
The MMS mission aims to improve on the Cluster mission is several ways. Like Cluster, MMS will deploy a formation of four spacecraft moving in a close tetrahedral formation about a highly elliptical orbit with each of the spacecraft carrying a suite of instruments for in situ measurements of electric and magnetic fields and charged particle composition. The orbit selection and relative spacing are quite different with the mission intending to fly two distinct science phases each with multiple formation scale sizes.
• Phase 1: day side of magnetic field 1.2 RE x 12 RE. MMS will probe reconnection sites at the mid-latitude dayside magnetopause (red region on the left in Figure 10). Here the interplanetary magnetic field (IMF) merges with the geomagnetic field, transferring mass, momentum, and energy to the magnetopause. The solar wind flow transports the merged IMF/geomagnetic field lines toward the nightside, causing a build up of magnetic flux in the magnetotail.
In Phase 1, the formation flies with a relative spacing ranging from 10-160 km in a 1.2 x 12 RE orbit. Primary science is taken when the tetrahedron is at distances greater than 9 RE from the Earth and is within 30º of the Earth-Sun line, on the sunward side.
• Phase 2: night side of magnetic field 1.2 RE x 25 RE. The MSS constellation will investigate reconnection sites in the nightside magnetotail (red region on right side of Figure 10), where reconnection releases the magnetic energy stored in the tail in explosive events known as magnetospheric substorms and allows the magnetic flux stripped away from the dayside magnetopause by the solar wind/magnetosphere interaction to return to the dayside.
In Phase 2, the relative spacing is 30-400 km of the spacecraft occurs in a 1.2 x 25 RE orbit. Primary science is taken when the tetrahedron is at distances greater than 15 RE from the Earth and is within 30-40º of the Earth-Sun line on the night-ward side.
Orbits: HEO (Highly Elliptical Orbit) of 1.2 RE (perigee) x 12 RE (apogee), inclination = 28º. Note 1 RE = 6371 km. As the orbit evolves during Phase 1, the spacecraft will sample reconnection sites at different locations on the dayside magnetopause.
A transfer phase connects the two science phases by the execution of a series of maneuvers to raise each spacecraft's apogee while keeping the formation from drifting too far apart. The variable distances from Earth and inter-spacecraft spacing allows the MMS formation to act as a science instrument (Figure 11), with the inter-spacecraft distances being chosen to match the scale sizes of the physics occurring at different locations in the Earth's magnetosphere (Ref. 21).
Execution of the basic mission design requires that both deterministic and random maneuvers be performed in operations. The deterministic maneuvers are used to change the overall orbital characteristics of the formation and the random maneuvers arise from the need to maintain the formation against the relative drift that builds up over time. The number, size, and direction of these maintenance maneuvers are unknown a priori and are very dependent on the realization of a number of error sources (natural and man-made) in the system.
Earth's J2 term in the geopotential causes differential evolution of the orbit states of each spacecraft and is the largest natural perturbation. Lunar gravitational affects also play a significant role in Phase 2, because of the large apogee, causing both relative drift and, on occasion, a secular lowering of the perigee altitude below acceptable limits. Taken as a whole, these natural perturbations are well understood and predictable, depending deterministically on the initial orbital state and its subsequent evolution. The formation lifetime, defined as the time between maintenance maneuvers, in the presence of these natural perturbations, is on the order of 40-70 days.
In contrast, the man-made perturbations due to knowledge and execution errors in the maneuver process generically dominate the natural perturbations. Taken together, this combination of knowledge and execution error causes a post-maneuver evolution that is different from the one desired. The situation is further complicated by the fact that each spacecraft experiences its own realizations of these errors with no correlation between them. The man-made error sources associated with maneuver operations generally lower the formation lifetime to a range of 5-20 days.
The variable nature in the number of and type of maneuvers coupled with the „cooperative effect‟ of the errors makes pre-launch planning and operational support of the MMS formation flying problem very difficult. Questions associated with the stability of the design, such as how much fuel to budget, how maneuvers will be performed, and when to schedule ground assets to support the maneuvers, cannot be answered with simple analytical models. It was to address this need that the MMS flight dynamics group developed the End-to-End (ETE) code. The ETE code is designed to perform Monte Carlo simulations of the entire MMS operations phase from launch until the end of Phase 2 science. It combines high-fidelity orbit propagation, realistic models of the propulsion system, and models for navigation knowledge and maneuver execution errors into an event-driven framework that allows it to produce different maneuver scenarios in response to the different errors it encounters. Statistical reduction of the resulting data is then used to allocate resources for the actual launch campaign (Ref. 21).
MMS Navigator System:
Each spacecraft will fly the GSFC-developed IRAS (Inter-spacecraft Ranging and Alarm System), which consists of the Navigator GPS receiver integrated with a crosslink transceiver and a high quality frequency reference [i.e. an ultra-stable oscillator (USO)]. The tracking loops in the Navigator receiver are tuned to acquire low strength GPS signals to increase the number of GPS Space Vehicles (SVs) that can be acquired at high altitudes. This receiver has been demonstrated to reduce the acquisition threshold below 25 dB Hz as compared with a threshold of 35 dBHz that is typical for GPS receivers designed for LEO (Low Earth Orbiting) satellites. Each IRAS will also acquire and transmit one-way crosslink range measurements from the other formation members at intervals of 4 minutes. The GPS pseudorange (PR) and crosslink range measurements and associated state vectors for each of the formation members will be provided as data via the intersatellite link. 23) 24) 25) 26) 27) 28) 29) 30) 31)
To perform on-board orbit determination, the IRAS hosts the GEONS (GPS Enhanced Onboard Navigation System) flight software. GEONS is a flight software package developed by NASA to provide onboard orbit determination for a wide range of orbit types. GEONS is capable of using GPS measurements and intersatellite crosslink measurements to simultaneously estimate absolute and relative orbital states. GEONS employs an EKF (Extended Kalman Filter) augmented with physically representative models for gravity, atmospheric drag, solar radiation pressure, clock bias and drift to provide accurate state estimation and a realistic state error covariance.
The Navigator GPS receiver employs a weak signal tracking technology that significantly improves reception of GPS signals when the spacecraft is above 10 Re. Thrust acceleration measurements from an accelerometer within the ACS (Attitude Control System) are recorded during maneuvers and incorporated into the dynamics modeling in the EKF. The estimated states are periodically downlinked and used in the MMS FDOA (Flight Dynamics Operations Area) to generate definitive and predictive products for support of mission and science operations. “Definitive” refers to the portion of the ephemeris that is produced by EKF estimates using measurements. “Predicted” ephemerides are propagated from the last point of the definitive ephemeris.
Factorized EKF (Extended Kalman Filter)
Every 30 seconds for maximum of 12 GPS PR (Pseudo Range)
Nonspherical Earth gravity model
13 x 13 JGM-2
Polynomial fit to JPL Definitive Ephemeris (DE)404
Harris Priester Atmospheric Density
Solar radiation pressure
Spherical area model
4th order Runge Kutta
Maximum integrator stepsize
Finite burn using 10-second averaged accelerations
Figure 14 provides an overview of the MMS navigation operations concept. Ground operations support for all MMS spacecraft is provided from a single MOC (Mission Operations Center ), which includes a FDOA (Flight Dynamics Operations Area) that supports MMS navigation operations, as well as maneuver planning, conjunction assessment, and attitude ground operations.
Several challenging navigation requirements result from the fact that the majority of the MMS mission occurs above the GPS constellation, where GPS signal acquisition is sparse. Critical navigation requirements include:
- A maximum mean semi-major axis (SMA) error of 100 m above 3 Re within the definitive ephemeris; necessary to meet formation maintenance (FM) maneuver planning requirements
- A maximum relative definitive position error of 1%of the separation distance between spacecraft or 100 m, whichever is larger; necessary to meet science requirements
- A maximum relative predicted position error growth of 200 m/day; necessary to meet collision avoidance requirements
- A maximum USO clock bias error of 325 microseconds; necessary to meet a 1 millisecond maximum relative clock bias error science requirement.
GEONS Performance Assessment Process (Ref. 30):
During the initial nine weeks of the mission when the GSFC FDF (Flight Dynamics Facility) was the primary source of definitive MMS orbit solutions, an extensive analysis was performed to certify the GEONS solutions for MMS navigation. The certification process consist of evaluating GEONS inflight performance with respect to the associated onboard definitive navigation requirements and related ground predictive requirements. GEONS definitive performance is evaluated primarily by comparing GEONS solutions extracted from telemetry data downlinked from the MMS spacecraft versus FDF solutions, assumed as the reference for definitive orbit solutions. Predictive performance is evaluated by comparing the predictive solutions with both the definitive FDF and GEONS solutions. The predictive solutions are generated by propagating GEONS solutions in the Planning Products segment of the MMS FDOA ground system, which is based on FreeFlyer 6.9.1. The prediction process is configured to use a variable step Runge Kutta 8(9+) integrator with a maximum stepsize of 30 sec, a 21 x 21 EGM96 Earth gravity model, solar and lunar point mass gravity using DE 405, solar radiation pressure, and the Jacchia-Roberts atmospheric density model. The predictive solutions are used to support maneuver planning, conjunction assessment, and SN (Space Network) and DSN (Deep Space Network) contact scheduling and acquisition.
The comparisons are performed using the GGSS (GEONS Ground Support System), which is a component of the FDOA ground system. GGSS is an extensible ground software tool, developed to support space missions that use GEONS as the onboard navigation system. GGSS uses the NetBeans Platform module system as a base, which permits developers to leverage an existing collection of NetBeans plugins. GGSS performs a significant amount of data analysis and product generation using a custom MATLAB toolbox developed for the MMS mission. Because the MMS orbits are highly elliptical, time series trending is not adequate for performance measures that vary significantly over each orbit. Therefore, GGSS also performs period-folded trending in mean anomaly bins for many of the performance measures. Under the assumption that performance measures are approximately stationary within small mean anomaly bins across multiple orbits, period folding permits the computation of statistics such as means and 99% confidence intervals for each bin.
FDF provided orbit determination support for the first nine weeks of the MMS mission. During the remainder of the mission, FDF will maintain a cold backup orbit determination support capability. From the time of spacecraft separation through the first four weeks of the mission, the FDF definitive solutions were computed using the batch-least-squares estimator in the GTDS (Goddard Trajectory Determination System). Starting at April 7, 2015, the FDF definitive solutions were computed using the filter/backward smoother capability in the ODTK (Orbit Determination Tool Kit); these solutions additionally include realistic definitive covariance data. The FDF solutions were generated by processing range-rate measurements from DSN contacts and range and Doppler measurements from SN contacts. Later in the commissioning phase, the USN (Universal Space Network) station at Kiruna, Sweden provided additional Doppler tracking near perigee when SN passes were cancelled or not available. Kiruna Doppler tracking exhibited a relatively large bias throughout the commissioning in both the GTDS and ODTK solutions, which were applied in all GTDS solutions and estimated in ODTK solutions. Throughout the commissioning phase, the MMS satellite spin rate induced a large Doppler noise envelope of varying magnitude depending on the spin rate, which ranged from 3 rpm to 7 rpm.
The primary GEONS navigation calibration time span was 2015-133-17:00 UTC through 2015-136-17:00 UTC; this was a “quiescent” period in which no orbit or attitude maneuvers occurred. During this 3-day navigation calibration period, the FDF also delivered ODTK solutions in which the definitive attitude profile was used to model the effects of the MMS spacecraft spin on the tracking measurements. The Doppler residuals were significantly smaller when the spin effects were modeled. These solutions, referred to as “despun” solutions, are used to generate the definitive difference plots.
MMS operation concepts:
Each spacecraft deploys 8 booms: 4 SDP (Spin-plane Double Probe) instruments on wire booms in the spin-plane for measuring the electric fields; 2 magnetometer instruments, also on booms in the spin-plane, for measuring the magnetic field; and 2 ADP (Axial Double Probe) instruments on rigid booms parallel to the spin-axis for measuring electric fields.
The propulsion system for each spacecraft consists of 8 radial 18 N thrusters oriented parallel to the spin plane, with sets of 4 on opposite sides of the spacecraft, and 4 axial 4.5 N thrusters. Each spacecraft is also equipped with a suite of guidance, navigation, and control sensors including a digital sun sensor, a star camera, an accelerometer, and a Navigator GPS receiver with GEONS navigation software built-in. Onboard controllers process data from this sensor suite to actuate the thrusters to the desired accuracy in the orbit and attitude maneuvers while ensuring the stability and safety of the deployed booms. Figure 15 shows a diagram of the spacecraft showing the deployed booms and a schematic of the propulsion system.
Legend to Figure 15: (a) MMS spacecraft showing the 8 booms for the electric and magnetic fields deployed and (b) MMS spacecraft with propulsion system with the location of the 18 N radial thrusters shown in red and the location of the 4.5 N axial thruster shown in yellow (with symmetric placement of the other 6 thrusters on the opposite faces).
From the flight dynamics perspective, the MMS operations concept is best understood by dividing the driving requirements into two categories. The first category, called the baseline, holds all of the requirements related to how the formation as a whole moves with respect to the magnetosphere. The second category, called formation flying, holds all of the requirements related to the relative orbital evolution of the formation.
• April 28, 2022: In just minutes, a flare on the Sun can release enough energy to power the whole world for 20,000 years. An explosive process called magnetic reconnection triggers these solar flares and scientists have spent the last half-century trying to understand how the process happens. 32)
- It’s not just a scientific curiosity: A fuller understanding of magnetic reconnection could enable insights into nuclear fusion and provide better predictions of particle storms from the Sun that can affect Earth-orbiting technology.
- Now, scientists with NASA’s Magnetospheric Multiscale Mission, or MMS, think they’ve figured it out. The scientists have developed a theory that explains how the most explosive type of magnetic reconnection – called fast reconnection – occurs and why it happens at a consistent speed. The new theory uses a common magnetic effect that’s used in household devices, such as sensors that time vehicle anti-lock braking systems and know when a cell phone flip cover is closed.
- “We finally understand what makes this type of magnetic reconnection so fast,” said lead author on the new study Yi-Hsin Liu, a physics professor at Dartmouth College in New Hampshire and the deputy-lead of MMS’ theory and modeling team. “We now have a theory to explain it fully.”
- Magnetic reconnection is a process that occurs in plasma, sometimes called the fourth state of matter. Plasma forms when a gas has been energized enough to break apart its atoms, leaving a motley of negatively charged electrons and positively charged ions existing side-by-side. This energetic, fluid-like material is exquisitely sensitive to magnetic fields.
- From flares on the Sun, to near-Earth space, to black holes, plasmas throughout the universe undergo magnetic reconnection, which rapidly converts magnetic energy into heat and acceleration. While there are several types of magnetic reconnection, one particularly puzzling variant is known as fast reconnection, which occurs at a predictable rate.
- “We have known for a while that fast reconnection happens at a certain rate that seems to be pretty constant,” said Barbara Giles, project scientist for MMS and research scientist at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. “But what really drives that rate has been a mystery, until now.”
- The new research, published in a paper in Nature’s Communications Physics journal and funded in part by the National Science Foundation, explains how fast reconnection occurs specifically in collisionless plasmas – a type of plasma whose particles are spread out enough that the individual particles don’t collide with one another. Where reconnection happens in space, most plasma is in this collisionless state, including the plasma in solar flares and the space around Earth. 33)
- The new theory shows how and why fast reconnection is likely sped up by the Hall effect, which describes the interaction between magnetic fields and electric currents. The Hall effect is a common magnetic phenomenon that’s used in everyday technology, like vehicle wheel speed sensors and 3D printers, where sensors measure speed, proximity, positioning, or electrical currents.
- During fast magnetic reconnection, charged particles in a plasma – namely ions and electrons – stop moving as a group. As the ions and electrons begin moving separately, they give rise to the Hall effect, creating an unstable energy vacuum where reconnection happens. Pressure from the magnetic fields around the energy vacuum causes the vacuum to implode, which quickly releases immense amounts of energy at a predictable rate.
- The new theory will be tested in the coming years with MMS, which uses four spacecraft flown around Earth in a pyramid formation to study magnetic reconnection in collisionless plasmas. In this unique space laboratory, MMS can study magnetic reconnection at a higher resolution than would be possible on Earth.
- “Ultimately, if we can understand how magnetic reconnection operates, then we can better predict events that can impact us at Earth, like geomagnetic storms and solar flares,” Giles said. “And if we can understand how reconnection is initiated, it will also help energy research because researchers could better control magnetic fields in fusion devices.”
• July 6, 2021: Scientists have used data from the Southwest Research Institute-led Magnetospheric Multiscale (MMS) mission to explain the presence of energetic heavy elements in galactic cosmic rays (GCRs). GCRs are composed of fast-moving energetic particles, mostly hydrogen ions called protons, the lightest and most abundant elements in the universe. Scientists have long debated how trace amounts of heavy ions in GCRs are accelerated. 34)
- The supernova explosion of a dying star creates massive shockwaves that propagate through the surrounding space, accelerating ions in their path to very high energies, creating GCRs. How heavy ions are energized and accelerated is important because they affect the redistribution of mass throughout the universe and are essential for the formation of even heavier and more chemically complex elements. They also influence how we perceive astrophysical structures.
- “Heavy ions are thought to be insensitive to an incoming shockwave because they are less abundant, and the shock energy is overwhelmingly consumed by the preponderance of protons. Visualize standing on a beach as waves move the sand under your feet, while you remain in place,” said SwRI’s Dr. Hadi Madanian, the lead author of the paper about this research published in Astrophysical Journal Letters. “However, that classical view of how heavy ions behave under shock conditions is not always what we have seen in high-resolution MMS observations of the near-Earth space environment.” 35)
- Shock phenomena also occur in the near-Earth environment. The Sun’s magnetic field is carried through interplanetary space by the supersonic solar wind flow, which is obstructed and diverted by the Earth’s magnetosphere, a bubble of protection around our home planet. This interaction region is called the bow shock due to its curved shape, comparable to the bow waves that occur as a boat travels through water. The Earth’s bow shock forms at a much smaller scale than supernova shocks. However, at times, conditions of this small shock resemble those of supernova remnants. The team used high-resolution in-situ measurements from the MMS spacecraft at the bow shock to study how heavy ions are accelerated.
- “We observed intense amplification of the magnetic field near the bow shock, a known property associated with strong shocks such as supernova remnants. We then analyzed how different ion species behaved as they encountered the bow shock,” Madanian said. “We found that these enhanced fields significantly modify the trajectory of heavy ions, redirecting them into the acceleration zone of the shock.”
- While this behavior was not expected to occur for heavy ions, the team identified direct evidence for this process in alpha particles, helium ions that are four times more massive than protons and have twice the charge.
- “The superb resolution of MMS observations has given us a much clearer picture of how a shockwave energizes the heavy elements. We will be able to use this new understanding to improve our computer models of cosmic ray acceleration at astrophysical shocks,” said David Burgess, a professor of mathematics and astronomy at Queen Mary University of London and a coauthor of the paper. “The new findings have significant implications for the composition of cosmic rays and the observed radiation spectra from astrophysical structures.”
- NASA’s four MMS satellites use the near-Earth environment as a laboratory to study various space physics phenomena. Goddard Space Flight Center built, integrated and tested the four MMS spacecraft and is responsible for overall mission management and mission operations. The principal investigator for the MMS instrument suite science team is based at SwRI in San Antonio, Texas. Science operations planning and instrument commanding are performed at the MMS Science Operations Center at the University of Colorado’s Laboratory for Atmospheric and Space Physics in Boulder.
• March 12, 2020: Since its launch on March 12, 2015, NASA’s MMS (Magnetospheric Multiscale) mission has been making new discoveries as it flies around Earth studying magnetic reconnection — the explosive snapping and forging of magnetic field lines, at the heart of space weather storms that manifest around Earth. In its first year, MMS’s state-of-the-art design broke records — and it hasn’t stopped excelling since. 36)
- The mission uses four identical spacecraft flying in a pyramid-shape to measure magnetic field lines and charged particles in three-dimensions. In 2016 their trajectory won the spacecraft a Guinness World record for highest altitude fix of a GPS — 43,500 miles above the surface (which it later smashed with a fix at 116,300 miles). Additionally, when the satellites are closest to Earth, they move at up to 22,000 miles per hour, making them the fastest known operational use of a GPS receiver.
- But it’s not just about breaking flight records. MMS has made pivotal scientific discoveries that are helping scientists understand the Earth’s magnetic environment — its magnetosphere — and magnetic reconnection, which powers magnetic storms around Earth and sparks the auroras. Here are five ways MMS has changed our understanding of these explosive events in our near-Earth space in the past five years.
1) How Magnetic Reconnection Works
- Determining the details of how magnetic reconnection works was one of the key jobs MMS was tasked with — and the mission soon delivered. Before MMS, scientists didn’t truly understand the specifics of how magnetic reconnection works, they only had general ideas. But MMS quickly changed that. Mission observations determined which of several 50-year-old theories about magnetic reconnection were correct and further showed how the physics of electrons dominates the process, which had not been predicted. Much of the discovery was driven by MMS’s innovative instrument design. “We increased MMS’s instrument measuring speeds 100 times from previous instruments,” said Jim Burch, principal investigator for MMS at the Southwest Research Institute in San Antonio, Texas. “It’s allowed us to see things no one had been able to measure before MMS.”
2) Reconnection in Surprising New Places
- In the five years after launch, MMS made over a thousand trips around Earth, passing through countless magnetic reconnection events. It saw magnetic reconnection where scientists first expected it, behind the Earth, away from the Sun — and it discovered magnetic reconnection in several new places. Completely surprising scientists, MMS has seen events in turbulent regions in front of Earth that were previously expected to be too tumultuous for magnetic reconnection. It has also observed magnetic reconnection in magnetic flux ropes — giant magnetic tubes, which can form in the wake of previous magnetic reconnection events, and in Kelvin-Helmholtz vortices, the same phenomenon that are created when wind blows over water to create waves on the surface.
3) Transferring Energy
- MMS scientists discovered the ways energy is transferred via magnetic reconnection and at what rate, in part because of the spacecrafts’ tight flying formation — just 4.5 miles between them, the closest of any spacecraft ever flown — which allows scientists to study small-scale details unobservable by previous missions. One energy transfer mechanism was discovered in 2017 when scientists uncovered complex electron motions in the thin layers of electrical current where reconnection happens. The unique dances electrons made in this region allowed them to gain additional energy and accelerate the reconnection process.
4) Computer Simulations
- Before MMS, computer simulations were the best tool scientists had to understand magnetic reconnection. The models were a way to fill in the gaps between measurements made across large distances as captured by previous space missions. But thanks to MMS’s detailed measurements, the scales flipped. Today MMS’s high resolution data has uncovered a myriad of electron-scale physics that the computer simulations are now rushing to accurately represent. Having such detailed data has allowed theoretical physicists to further refine their models and understand the specific mechanisms behind magnetic reconnection better than ever before.
5) Insights into Astrophysics and Nuclear Physics
- MMS has opened a unique space laboratory where all scales of magnetic reconnection can be directly measured by the spacecraft as they fly through ongoing events. This has allowed new insights into magnetic reconnection in other regions of space, including explosions on the Sun and in supernovae and black holes.
- “MMS’s measurements are critical because we can understand how magnetic reconnection happens in other places, even though we can’t get there,” said Kevin Genestreti, MMS research scientist at the Southwest Research Institute’s Earth, Oceans and Space Department at the University of New Hampshire in Durham. MMS has also given insight into nuclear experiments on Earth. The plasma — that is, the hot, charged gases — used in nuclear experiments is the same state of matter that MMS flies through as it travels through space. Magnetic reconnection, which happens often within plasma, poses a challenge for scientists wanting to confine plasma in nuclear experiments. The information garnered by MMS is helping scientists better understand and potentially control magnetic reconnection, which may lead to improved nuclear fusion techniques to generate energy more efficiently.
- MMS was originally launched for a two-year prime mission, and after its early successes it was extended an additional three years. Due to careful maneuvering during flight operations, MMS should have enough fuel to last it at least another two decades.
- “MMS has well over 100 instrument components,” said Barbara Giles, MMS senior project scientist at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. “We’re five years in and this mission is still just as capable as when it launched.”
- To date, MMS data has been used in over 580 scientific papers. MMS has also launched early career scientists and contributed to 14 PhD theses and 10 master’s theses. Outreach at schools, museums, conferences and other events has also directly reached 120,000 people. MMS scientists are confident the spacecraft’s data will continue to fuel new discoveries for decades to come.
• August 8, 2019: The MMS (Magnetospheric Multiscale) mission has spent the past four years using high-resolution instruments to see what no other spacecraft can. Recently, MMS made the first high-resolution measurements of an interplanetary shock. 37)
- These shocks, made of particles and electromagnetic waves, are launched by the Sun. They provide ideal test beds for learning about larger universal phenomena, but measuring interplanetary shocks requires being at the right place at the right time. Here is how the MMS spacecraft were able to do just that.
What’s in a Shock?
- Interplanetary shocks are a type of collisionless shock — ones where particles transfer energy through electromagnetic fields instead of directly bouncing into one another. These collisionless shocks are a phenomenon found throughout the universe, including in supernovae, black holes and distant stars. MMS studies collisionless shocks around Earth to gain a greater understanding of shocks across the universe.
- Interplanetary shocks start at the Sun, which continually releases streams of charged particles called the solar wind.
- The solar wind typically comes in two types — slow and fast. When a fast stream of solar wind overtakes a slower stream, it creates a shock wave, just like a boat moving through a river creates a wave. The wave then spreads out across the solar system. On Jan. 8, 2018, MMS was in just the right spot to see one interplanetary shock as it rolled by.
Catching the Shock
- MMS was able to measure the shock thanks to its unprecedentedly fast and high-resolution instruments. One of the instruments aboard MMS is the Fast Plasma Investigation. This suite of instruments can measure ions and electrons around the spacecraft at up to 6 times per second. Since the speeding shock waves can pass the spacecraft in just half a second, this high-speed sampling is essential to catching the shock.
- Looking at the data from Jan. 8, the scientists noticed a clump of ions from the solar wind. Shortly after, they saw a second clump of ions, created by ions already in the area that had bounced off the shock as it passed by. Analyzing this second population, the scientists found evidence to support a theory of energy transfer first posed in the 1980s.
- MMS consists of four identical spacecraft, which fly in a tight formation that allows for the 3D mapping of space. Since the four MMS spacecraft were separated by only 12 miles at the time of the shock (not hundreds of kilometers as previous spacecraft had been), the scientists could also see small-scale irregular patterns in the shock. The event and results were recently published in the Journal of Geophysical Research. 38)
Going Back for More
- Due to timing of the orbit and instruments, MMS is only in place to see interplanetary shocks about once a week, but the scientists are confident that they’ll find more. Particularly now, after seeing a strong interplanetary shock, MMS scientists are hoping to be able to spot weaker ones that are much rarer and less well understood. Finding a weaker event could help open up a new regime of shock physics.
• April 4, 2019: The four Magnetospheric Multiscale (MMS) spacecraft recently broke the world record for navigating with GPS signals farther from Earth than ever before. MMS’ success indicates that NASA spacecraft may soon be able to navigate via GPS as far away as the Moon, which will prove important to the Gateway, a planned space station in lunar orbit. 39)
- After navigation maneuvers conducted this February, MMS now reaches over 116,300 miles (187,166 km) from Earth at the highest point of its orbit, or about halfway to the Moon. At this altitude, MMS continued to receive strong enough GPS signals to determine its position, shattering previous records it set first in October 2016 and again in February 2017. This demonstrates that GPS signals extend farther than expected and that future missions can reliably use GPS at extreme altitudes.
- “At the first apogee after the maneuvers, MMS1 had 12 GPS fixes, each requiring signals from four GPS satellites,” said Trevor Williams, the MMS flight dynamics lead at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. “When we began the mission, we had no idea high-altitude GPS would be such a robust capability.”
- MMS’ orbit shift allows it to continue its mission to better understand the complex magnetic processes around Earth. MMS studies a fundamental process that occurs throughout the universe, called magnetic reconnection, in which magnetic fields collide and explosively release particles in all directions. Near Earth, reconnection is a key driver of space weather, the dynamic system of energy, particles and magnetic fields around Earth which can adversely impact communications networks, electrical grids and GPS navigation. Magnetic reconnection was long predicted by physicists, but not directly observed until the MMS mission.
- To study Earth’s magnetosphere, the region of space dominated by the planet’s magnetic field, MMS spacecraft maintain a highly elliptical orbit around Earth. A highly elliptical orbit resembles a long oval around the globe with an extreme high point, or apogee, and low point, or perigee.
- MMS’ tight formation and highly elliptical orbit require extremely accurate navigation data from GPS satellites, which are operated by the U.S. Air Force. The main GPS antenna signals enable navigation down on Earth, but precise high-altitude navigation requires both these as well as signals from the antenna’s side lobes. Side lobe signals radiate out to the side of the direction an antenna is pointing and extend past Earth.
- Communications engineers usually consider these side lobes wasted energy. However, the signals can be used by satellites at high altitudes on the opposite side of the globe as the GPS satellite. (Such high-altitude missions fly above GPS satellites’ orbit.) Previously, most engineers considered the upper limits of the GPS navigation in space to be an altitude of about 22,000 miles, or the altitude of satellites in geosynchronous orbit — until MMS.
- Additionally, the navigation maneuvers allowed the spacecraft to gather data not available to scientists during normal operations.
- “MMS usually flies in a close, tetrahedral formation [that looks like a pyramid],” said Thomas Moore, the project scientist for MMS at Goddard. “During the orbit-raising maneuvers, the spacecraft became a [straight line or] ‘string of pearls,’ which gave us unique data about the magnetosphere that may further our understanding of magnetic reconnection.”
- MMS’ tight configuration and record-breaking GPS fixes would not be possible without the mission’s Navigator GPS Receiver, an instrument developed at Goddard. It can detect faint GPS signals while withstanding the harsh radiation environment within the magnetosphere. NASA has made this revolutionary technology available for licensing through the Technology Transfer program, ensuring that commercial enterprise can also benefit from this innovation.
- NASA is exploring the upper limits of GPS service with more than just MMS. NASA navigation experts have run simulations demonstrating that these services could extend even farther when taking into account the collection of six international GPS-like constellations. These constellations are collectively referred to as global navigation satellite systems (GNSS).
- In fact, NASA simulations show GNSS signals could even be used for reliable navigation in lunar orbit, just as a car uses GPS on an interstate highway. Engineers are considering using GNSS signals in the navigation architecture for the Gateway, an outpost in orbit around the Moon that will enable sustained lunar surface exploration.
- “We’re working with the international community to document GNSS performance for space users, including side lobe signals,” said Joel Parker, a Goddard navigation engineer representing NASA internationally in GNSS policy. “A better understanding of GNSS capabilities will allow high-altitude missions to take advantage of the robust navigation signals they provide.”
- NASA’s Space Communications and Navigation (SCaN) program office oversees the agency’s work in navigation policy related to GNSS. NASA, consulting the United Nations International Committee on GNSS (ICG), collaborates with other U.S. agencies and the six international GNSS providers to define GNSS requirements and develop additional capabilities. The team of SCaN navigation specialists charged with aiding the ICG are based out of the Exploration and Space Communications projects division at Goddard.
• March 7, 2019: The four MMS (Magnetospheric Multiscale) spacecraft are flying out of their element. The spacecraft have just completed a short detour from their routine science — looking at processes within Earth’s magnetic environment — and instead ventured outside it, studying something they were not originally designed for. 40)
- For three weeks, MMS studied the solar wind — the stream of supersonic charged particles flung around the solar system by the Sun — to better understand what’s known as turbulence in plasmas, the heated, electrified gases that make up 99 percent of ordinary matter in the universe. Turbulence is the chaotic motion of a fluid. It shows up in daily life everywhere from eddies in a river to smoke from a chimney, but it is incredibly hard to study because it’s so unpredictable and it remains one of the least well understood disciplines in all of physics. The mini-campaign will provide scientists with an up close and in-situ view to push the frontiers of the field.
- But to take these groundbreaking measurements, MMS had to operate in an entirely new way — and MMS scientists and engineers designed a clever way to allow the spacecraft to study the solar wind with unprecedented accuracy, testing the limits and versatilities of MMS’ capabilities.
Opening New Doors
- The Magnetospheric Multiscale mission, MMS, was launched in 2015 to study magnetic reconnection — the explosive snapping and forging of magnetic field lines, which flings high-energy particles around Earth. MMS was built with state-of-the-art instruments that take measurements with nearly 100 times better resolution than previous instruments. After two years of studying magnetic reconnection in Earth’s magnetic environment — the magnetosphere — on the dayside, MMS elongated its orbit to begin looking at reconnection behind Earth, away from the Sun, where it’s thought to spark the auroras.
- Since MMS has completed its original mission goals, it’s now taking time in its extended mission to tackle some new science objectives. Understanding turbulence, which is one of NASA’s prime science objectives, is the first mini-campaign MMS plans to undertake.
- “We would like to make a lot of these mini-campaigns in the future if this one is successful, which it’s already shaping up to be,” said Bob Ergun, researcher at the LASP (Laboratory for Atmospheric and Space Physics) in Boulder, Colorado, who heads the new campaign. “MMS is a very, very powerful observatory with incredibly sensitive instruments on it and we’re trying to maximize their use to study these other priority sciences.”
Thinking Outside of the Magnetosphere
- Studying the solar wind is best done from in the solar wind, but most of the time, the four MMS spacecraft orbit within or on the edge of Earth’s magnetosphere — where the magnetic field creates a buffer that protects the spacecraft from the solar wind. Occasionally, however, routine orbital adjustments, used to maintain MMS’ elongated orbit, take it well outside. This year, a boost to the spacecraft orbit is taking MMS entirely out of Earth’s magnetic environment and past the bow shock — a region where the supersonic solar wind slams into Earth’s magnetosphere. At such a distance, MMS passes through the solar wind itself, which allows a window of time to study the region’s turbulence.
- Studying the solar wind is nothing like studying magnetic reconnection, but can be done with the same instruments that measure magnetic and electric fields. MMS is equipped with some of the most precise instruments ever flown in space, but in order to use them to study the solar wind, some adjustments first need to be made.
- Normally MMS flies in a pyramid-shaped formation called a tetrahedron, which allows all four spacecraft to be equally separated. As they flew through the solar wind, the spacecraft were instead arranged in what scientists call a “string of pearls.” Flying perpendicular to the wind, the spacecraft followed one after another, each offset at distances of 25 to 100 km from their neighbor. This allows scientists to see how much the solar wind varies over different distances.
- However, as the spacecraft travel through the supersonic solar wind they create a wake behind them, just like a boat. This wake is not a natural feature in the solar wind, so the MMS scientists want to avoid having their instruments, which spin at the end of long booms, dragged through it. To make precise measurements unencumbered by the wake, the spacecraft were each tilted up 15 degrees. The tilt lifts the spinning booms up from travelling behind the spacecraft through the wake.
- This angle allows scientists to get better data, but it comes with a cost. As a result of the tilt, the solar array doesn’t get as much light, meaning the spacecraft’s power is reduced by a few watts each. The tilt also puts thermal stress on the spacecraft, since the top of each gets hotter than the bottom. For a short campaign however, these effects won’t permanently affect the spacecraft.
Old Spacecraft, New Tricks
- The data MMS gathered in this campaign will be some of the most accurate measurements of turbulence in the solar wind ever made. The research will also complement the work being done by NASA’s Parker Solar Probe, which flies through the Sun’s atmosphere studying the origins of the solar wind. While Parker Solar Probe measures the initial turbulence in the solar wind, MMS measured the aftermath when it reaches Earth.
- “Almost all of the astrophysical plasmas we look at around the Sun, stars, black holes, accretion disks, jets, are all extremely turbulent, so by understanding it around Earth we understand it elsewhere,” Ergun said.
- Ultimately this mini-campaign will also serve as a test case for what MMS is capable of doing in the future. Learning the nuances of MMS’ formations and tilt angles will allow the scientists to better understand MMS’s range of abilities, which may open the door up for other types of scientific campaigns as well.
• February 15, 2019: Queen Mary University of London has led a study which describes the first direct measurement of how energy is transferred from the chaotic electromagnetic fields in space to the particles that make up the solar wind, leading to the heating of interplanetary space. 41)
- The study, published in Nature Communications and carried out with University of Arizona and the University of Iowa, shows that a process known as Landau damping is responsible for transferring energy from the electromagnetic plasma turbulence in space to electrons in the solar wind, causing their energization.
- This process, named after the Nobel-prize winning physicist Lev Landau (1908-1968), occurs when a wave travels through a plasma and the plasma particles that are travelling at a similar speed absorb this energy, leading to a reduction of energy (damping) of the wave.
- Although this process had been measured in some simple situations previously, it was not known whether it would still operate in the highly turbulent and complex plasmas occurring naturally in space, or whether there would be a different process entirely.
- All across the universe, matter is in an energized plasma state at far higher temperatures than expected. For example, the solar corona is hundreds of times hotter than the surface of the Sun, a mystery which scientists are still trying to understand.
- It is also vital to understand the heating of many other astrophysical plasmas, such as the interstellar medium and the disks of plasma surrounding black holes, in order to explain some of the extreme behavior displayed in these environments.
- Being able to make direct measurements of the plasma energization mechanisms in action in the solar wind (as shown in this paper for the first time) will help scientists to understand numerous open questions, such as these, about the universe.
- The researchers discovered this using new high-resolution measurements from NASA's Magnetospheric Multi-Scale (MMS) spacecraft (launched in 2015), together with a newly-developed data analysis technique (the field-particle correlation technique).
- The solar wind is the stream of charged particles (i.e., plasma) that comes from the Sun and fills our entire solar system, and the MMS spacecraft are located in the solar wind measuring the fields and particles within it as it streams past.
- Lead author Dr Christopher Chen, from Queen Mary University of London, said: "Plasma is by far the most abundant form of visible matter in the universe, and is often in a highly dynamic and apparently chaotic state known as turbulence. This turbulence transfers energy to the particles in the plasma leading to heating and energization, making turbulence and the associated heating very widespread phenomena in nature. In this study, we made the first direct measurement of the processes involved in turbulent heating in a naturally occurring astrophysical plasma. We also verified the new analysis technique as a tool that can be used to probe plasma energization and that can be used in a range of follow-up studies on different aspects of plasma behavior."
- University of Iowa's Professor Greg Howes, who co-devised this new analysis technique, said: "In the process of Landau damping, the electric field associated with waves moving through the plasma can accelerate electrons moving with just the right speed along with the wave, analogous to a surfer catching a wave. This first successful observational application of the field-particle correlation technique demonstrates its promise to answer long-standing, fundamental questions about the behavior and evolution of space plasmas, such as the heating of the solar corona."
- This paper also paves the way for the technique to be used on future missions to other areas of the solar system, such as the NASA Parker Solar Probe (launched in 2018) which is beginning to explore the solar corona and plasma environment near the Sun for the first time. 42)
• November 1, 2018: Analyzing data from NASA’s Magnetospheric Multiscale (MMS) mission, a team led by Southwest Research Institute (SwRI) has found that the small regions in the Earth’s magnetosphere that energize the polar aurora are remarkably calm and nonturbulent. The new observations, which also revealed intense electron jets associated with the regions where magnetic reconnection occurs, were outlined in a paper published in Science Nov. 15. 43) 44)
- “On the sunward side, explosive magnetic reconnection events dump energy into Earth’s magnetosphere, the region surrounding the Earth dominated by its magnetic field,” said the paper’s lead author, Dr. Roy Torbert, the heliophysics program director at SwRI’s Department of Earth, Oceans and Space at the University of New Hampshire, Durham. “Reconnection on the night side is dumping energy into Earth’s atmosphere, as electrons travel down magnetic field lines and excite aurora. The more we understand about these processes, the better we can understand and model how ‘space weather’ could affect the technology we depend on.”
- Magnetic reconnection — which occurs in both natural plasma environments such as those in space and in laboratory fusion experiments — is at the heart of space weather. Reconnection is responsible for explosive solar events, such as solar flares and coronal mass ejections, and drives disturbances in Earth’s space environment. Such disturbances not only produce spectacular auroras, but also the high-energy electromagnetic radiation they send toward Earth can shut down electrical power grids and disrupt satellite-based communication and navigation systems.
- NASA’s four Magnetospheric Multiscale (MMS) satellites have spent the last three years studying magnetic reconnection in the near-Earth environment. For the first half of the mission, the satellites studied reconnection that occurs in the sunward side of Earth where the solar wind — the constant flow of charged particles from the Sun — pushes into Earth’s magnetic field. The two sides connecting have different densities, which cause magnetic reconnection to occur asymmetrically, spewing electrons away at supersonic speeds. In the magnetotail, the trailing portion of the magnetosphere blown back by the solar wind, only the Earth’s field lines are colliding, so the particles are accelerated nearly symmetrically.
- “For the first time, we have observed the details of the energy dissipation regions where symmetric reconnection occurs,” Torbert said. “We measured the aspect ratio of these remarkably small regions, just a few hundred kilometers in size. We’re beginning to understand the efficiency of energy release and how it connects in our environment.”
- The unprecedented resolution and accuracy of the MMS measurements revealed these events last only a few seconds, producing extremely high velocity electron jets — over 15,000 km/s and intense electric fields and electron velocity distributions.
- “The process appears to be very efficient,” Torbert said. “Any turbulence is not strong enough to disturb discrete features of the electron velocity distributions created in the electromagnetic fields around the energy dissipation region.”
• October 3, 2018: Magnetic reconnection causes storms in space and can damage fusion research devices on earth. Researchers are investigating why and how it happens so fast. 45)
- The sun doesn't normally deliver electrical shocks. But on two days in September 1859, a solar flare caused electricity to flow from the atmosphere down telegraph lines. In some cases, it flowed into the operators, delivering a nasty shock. In others, it lit the telegraph paper on fire. Telegraph systems in several countries failed outright.
- If a similar flare and resulting geomagnetic storm happened today, "it would have an enormously disruptive effect on life on Earth," said Ellen Zweibel, a theoretical physicist at the University of Wisconsin-Madison. Massive telecommunications and electrical outages would be likely. "We would really love to know how to predict how strong a flare would be."
- The key to forecasting such a flare is understanding a phenomenon called magnetic reconnection.
- Magnetic reconnection is a process that occurs nearly anywhere there's plasma. The fourth state of matter, plasma, is gas made up of unbound ions and electrons. As plasma makes up the stars and 99 percent of the visible universe, magnetic reconnection is quite common. However, it is poorly understood. Scientists at universities, research institutes, the Department of Energy Office of Science's Princeton Plasma Physics Laboratory (PPPL), and NASA are coming close to mapping the process of magnetic reconnection. With the help of modeling, experimental, and observational data, they think their most recent theory may provide the definitive map to guide scientists through this fundamental phenomenon.
- Small Collisions that Cause Big Problems: Anything that has a large amount of moving mass — from the Earth's core to galaxies — forms a magnetic field. "You look every direction in the universe and it is magnetized," said Hantao Ji, a PPPL physicist.
- Magnetic fields are made up of field lines. Electrons and ions flow along these invisible lines. When two sets of lines that have magnetic fields pointing in opposite directions get too close, they collide. As the field lines cross and form an X, they break and then reconnect to the other set of lines coming from the opposite direction. Forming U-shapes that push away from each other, they rearrange the magnetic field. By heating up and accelerating the particles in the plasma, that rearrangement transforms magnetic energy into particle energy. This tumultuous process is magnetic reconnection.
- "Magnetic reconnection is one of the most important phenomenon throughout the whole universe," said Jim Burch, Vice President of the Southwest Research Institute and principal investigator of NASA's Magnetospheric Multiscale (MMS) mission.
- Understanding magnetic reconnection could help us understand how magnetic fields arose early in the universe's history as well as protect us from its effects. When reconnection pierces the Earth's magnetic field, high-energy particles can flow from the sun into the Earth's atmosphere. Those particles can harm low-flying satellites and electrical grids. For PPPL scientists looking to recreate fusion — the energy source that powers the sun — magnetic reconnection reduces their control and can damage their machines.
- Capturing Fast Reconnection in Theory: Any theory explaining magnetic reconnection has to explain how fast it occurs and how it transforms so much energy.
- At first, scientists assumed they could explain magnetic reconnection using the standard theory that explains how fluids affected by magnetic fields behave. That didn't work. When scientists used this theory to calculate how quickly a solar flare develops, the answer was a million years. In reality, solar flares develop in only a few minutes.
- Next up was the Sweet-Parker theory, proposed in 1957. It described thin, stretched-out sheets of electrical current forming in the plasma. Magnetic field lines sit on top of these sheets of electrical current. As the magnetic field lines break apart, the particles that normally flow along the field lines break away from them and stop being magnetized.
- So far, so good. But reconnection according to the Sweet-Parker theory was still too slow. Using this theory, solar flares occurred hundreds of times slower than the real thing. This theory also didn't explain why the process released so much energy. A part of the map was missing.
- On the plus side, this theory could explain reconnection in certain types of plasmas. It also laid the groundwork for research to come.
- Filling in the Gaps on the Map: To expand their search, physicists turned to mathematical simulations, laboratory experiments, and observations in space. Theories provided the broad lines of the map, pointing the way for others to go.
- "I try to make a mathematical model that uses a relatively small number of laws of physics to explain the essential phenomena," said Zweibel. "A good cartoonist, with just a few lines, can create an image."
- Physicists that create computer models take those broad laws and enter them as limits for computers to follow. These simulations pencil in details to the broad lines.
- Laboratory experiments and observations of space plasma make those penciled lines more definitive. Theories and simulations help them know what to look for.
- While they had some data from fusion experiments, one of the first efforts to study magnetic reconnection was PPPL's MRX (Magnetic Reconnection Experiment). Physicist Masaaki Yamada and his colleagues designed the machine in the 1990s, repurposing pieces from a magnetic fusion experiment. Nearly 30 years later, MRX still creates conditions as close as it can to reconnection in space. After heating plasma to 20 times the temperature of the sun's visible surface, it triggers magnetic reconnection in a thousandth of a second. Using measurements of the plasma's density, temperature, and electrical fields, scientists create a 2D map of magnetic fields in the machine.
- If the data match the theories and models, they reinforce those results. If not, it's back to the drawing board.
- "You cannot always trust the simulation all of the time," said Fatima Ebrahimi, a PPPL modeler. "If it doesn't match [the experiment] very well, that means you need to go back to your simulation and probably revise your model."
- But Did It Work? This back-and-forth led to a new theory: two-fluid reconnection. Unlike previous theories, it modeled electrons and ions like two fluids that move separately from one other.
- When they ran the numbers, scientists were consistently getting reconnection rates that matched observations. It looked like the theory they had been searching for.
- Initial findings from the MRX looked promising. "We compared the data and had agreement between the MRX data and the numerical simulation," said Yamada. "It was really amazing."
- But scientists wanted more details about reconnection in larger plasmas. A comprehensive theory has to describe how magnetic reconnection occurs in different types of plasmas, from small ones in laboratories all the way up to the massive Crab Nebula in space. Scientists also categorize the different types of plasma depending on how much particles interact inside them. In the plasma inside the sun and early stages of solar systems, particles interact a lot. In the space plasma near Earth and in fusion research facilities, particles interact only a little.
- Unfortunately, plasma physicists couldn't collect these details on the ground. But NASA's satellites could.
- Scientists from PPPL worked with NASA to design the Magnetospheric Multiscale (MMS) mission. The first mission specifically designed to study magnetic reconnection, the MMS has four identical spacecraft. Launched in 2015, these craft are currently circling the globe. As they dart between the Earth's magnetic field and the sun's, they collect data to create 3D maps of magnetic fields. In the first year, they crossed the boundary 9,000 times and recorded 25 reconnection events.
- Theory, simulations, and data from the MRX provided a map to direct the MMS. The MMS searches for certain magnetic fields that the two-fluid theory predicts. The NASA scientists used the predictions to design parameters for the MMS's computers. Because the MMS collects so much data that it can only send down about 5 percent of it with full detail, it needs to be choosy.
- Since it first captured data on magnetic reconnection in 2016, the MMS has confirmed much of what two-fluid theory predicts. "It's just how science should work. [Theorists] made predictions and we came along and verified some," said Burch. "And we found new things and now [theorists] are trying to figure them out."
- But two-fluid theory still had a hole. The theory explains reconnection in small and medium plasmas but doesn't explain how reconnection happens in very large plasmas that have few interactions between their particles. As these plasmas make up much of the universe, it was a big gap.
- Enter the Plasmoid: In 2007, Nuno Loureiro, then a postdoctoral researcher at PPPL and a participant of the DOE Center for Multiscale Plasma Dynamics at the University of Maryland, developed what might be the final piece of the map. It was a new theory that became known as the plasmoid instability. It connects the Sweet-Parker and two-fluid models into a single theory. Later work at PPPL has expanded on his initial idea.
- Like Sweet-Parker, the plasmoid instability model starts with a stretched-out, thin sheet of electrical current with an accompanying magnetic field. Like the two-fluid model, it assumes the electrons and ions that flow along the magnetic field lines break away at different times.
- What makes this model different is that it is based on the fact that the sheets of electrical current are extremely unstable. As the sheets stretch, they break and form new ones, each thinner than the original. As these sheets separate, chains of magnetic bubbles (plasmoids) form between them. While previous theories had described these bubbles, no one had provided a good explanation of how and why they form.
- The theory proposes that as more bubbles form and sheets break up, the magnetic lines crash into each other and break. The lines disconnect from the ions first, then the electrons. The breaking feeds magnetic energy into the particles, heating them up and accelerating them. As time goes on, the whole process becomes faster and faster. It creates a runaway effect — fast reconnection.
- Unlike Sweet-Parker, this model provides the "oomph" to give fast reconnection its speed. Unlike the two-fluid theory, it illustrates why and how the process starts after that initial sheet of strong electric current forms.
- Modeling and experimental data have held the theory up — so far.
- Simulations such as Ebrahimi's have backed it up. By modeling reconnection on both a single sheet and multiple sheets, she discovered that bubbles sometimes grow in multiple sheets in 3D due to large-scale magnetic field generation when they do not in a single sheet in 2D. Her simulations also predicted the plasmoid instability in a large fusion device during plasma startup.
- In 2016, the best supporting evidence so far emerged. At the Terrestrial Reconnection Experiment at the University of Wisconsin (TREX), researchers supported by the Office of Science directly observed bubbles in a similar type of plasma to one that's common in space. The next year, observations at the MRX reinforced these results. Both observations lined up with simulations and theory.
- Unfortunately, both machines' technical limits mean that this isn't the end of the story. The plasmas' small size and restrictions on how well they can conduct electricity keep them from fully mimicking the processes that occur inside the sun or beginnings of solar systems.
- But the solution may be here soon. The MMS will continue to provide insight into plasma around the Earth. On the ground, future experimental devices will be able to investigate the type of plasmas that make up so much of the universe. Only then can scientists know if the plasmoid instability model holds the key or not.
- "We need to do research to find out if it is true," said Ji. "This is the grand challenge we are facing."
• May 09, 2018: Though close to home, the space immediately around Earth is full of hidden secrets and invisible processes. In a new discovery reported in the journal Nature, scientists working with NASA’s MMS (Magnetospheric Multiscale) spacecraft have uncovered a new type of magnetic event in our near-Earth environment by using an innovative technique to squeeze extra information out of the data. 46) 47)
- Magnetic reconnection is one of the most important processes in the space — filled with charged particles known as plasma — around Earth. This fundamental process dissipates magnetic energy and propels charged particles, both of which contribute to a dynamic space weather system that scientists want to better understand, and even someday predict, as we do terrestrial weather. Reconnection occurs when crossed magnetic field lines snap, explosively flinging away nearby particles at high speeds. The new discovery found reconnection where it has never been seen before — in turbulent plasma.
- “In the plasma universe, there are two important phenomena: magnetic reconnection and turbulence,” said Tai Phan, a senior fellow at the University of California, Berkeley, and lead author on the paper. “This discovery bridges these two processes.”
- Magnetic reconnection has been observed innumerable times in the magnetosphere — the magnetic environment around Earth — but usually under calm conditions. The new event occurred in a region called the magnetosheath, just outside the outer boundary of the magnetosphere, where the solar wind is extremely turbulent. Previously, scientists didn’t know if reconnection even could occur there, as the plasma is highly chaotic in that region. MMS found it does, but on scales much smaller than previous spacecraft could probe.
- MMS uses four identical spacecraft flying in a pyramid formation to study magnetic reconnection around Earth in three dimensions. Because the spacecraft fly incredibly close together — at an average separation of just four-and-a-half miles, they hold the record for closest separation of any multi-spacecraft formation — they are able to observe phenomena no one has seen before. Furthermore, MMS’s instruments are designed to capture data at speeds a hundred times faster than previous missions.
- Even though the instruments aboard MMS are incredibly fast, they are still too slow to capture turbulent reconnection in action, which requires observing narrow layers of fast moving particles hurled by the recoiling field lines. Compared to standard reconnection, in which broad jets of ions stream out from the site of reconnection, turbulent reconnection ejects narrow jets of electrons only a couple miles wide.
- “The smoking gun evidence is to measure oppositely directed electron jets at the same time, and the four MMS spacecraft were lucky to corner the reconnection site and detect both jets”, said Jonathan Eastwood, a lecturer at Imperial College, London, and a co-author of the paper.
- Crucially, MMS scientists were able to leverage the design of one instrument, the Fast Plasma Investigation, to create a technique to interpolate the data — essentially allowing them to read between the lines and gather extra data points — in order to resolve the jets.
- “The key event of the paper happens in only 45 milliseconds. This would be one data point with the basic data,” said Amy Rager, a graduate student at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, and the scientist who developed the technique. “But instead we can get six to seven data points in that region with this method, allowing us to understand what is happening.”
- With the new method, the MMS scientists are hopeful they can comb back through existing datasets to find more of these events, and potentially other unexpected discoveries as well.
- Magnetic reconnection occurs throughout the universe, so that when we learn about it around our planet — where it’s easiest for Earthlings to examine it — we can apply that information to other processes farther away. The finding of reconnection in turbulence has implications, for example, for studies on the Sun. It may help scientists understand the role magnetic reconnection plays in heating the inexplicably hot solar corona — the Sun’s outer atmosphere — and accelerating the supersonic solar wind. NASA’s upcoming Parker Solar Probe mission launches directly to the Sun in the summer of 2018 to investigate exactly those questions — and that research is all the better armed the more we understand about magnetic reconnection near home.
• January 3, 2018: The space high above Earth may seem empty, but it’s a carnival packed with magnetic field lines and high-energy particles. This region is known as the magnetosphere and, every day, charged particles put on a show as they dart and dive through it. Like tiny tightrope walkers, the high-energy electrons follow the magnetic field lines. Sometimes, such as during an event called magnetic reconnection where the lines explosively collide, the particles are shot off their trajectories, as if they were fired from a cannon. 48)
- Since these acts can’t be seen by the naked eye, NASA uses specially designed instruments to capture the show. The MMS (Magnetospheric Multiscale Mission) is one such looking glass through which scientists can observe the invisible magnetic forces and pirouetting particles that can impact our technology on Earth. New research uses MMS data to improve understanding of how electrons move through this complex region — information that will help untangle how such particle acrobatics affect Earth.
- Scientists with MMS have been watching the complex shows electrons put on around Earth and have noticed that electrons at the edge of the magnetosphere often move in rocking motions as they are accelerated. Finding these regions where electrons are accelerated is key to understanding one of the mysteries of the magnetosphere: How does the magnetic energy seething through the area get converted to kinetic energy — that is, the energy of particle motion. Such information is important to protect technology on Earth, since particles that have been accelerated to high energies can at their worst cause power grid outages and GPS communications dropouts.
- New research, published in the Journal of Geophysical Research, found a novel way to help locate regions where electrons are accelerated. Until now, scientists looked at low-energy electrons to find these accelerations zones, but a group of scientists lead by Matthew Argall of the University of New Hampshire in Durham has shown it’s possible, and in fact easier, to identify these regions by watching high-energy electrons. 49)
- This research is only possible with the unique design of MMS, which uses four spacecraft flying in a tight tetrahedral formation to give high temporal and spatial resolution measurements of the magnetic reconnection region. "We're able to probe very small scales and this helps us to really pinpoint how energy is being converted through magnetic reconnection," Argall said.
- The results will make it easier for scientists to identify and study these regions, helping them explore the microphysics of magnetic reconnection and better understand electrons' effects on Earth.
• May 18, 2017: You can’t see them, but swarms of electrons are buzzing through the magnetic environment — the magnetosphere — around Earth. The electrons spiral and dive around the planet in a complex dance dictated by the magnetic and electric fields. When they penetrate into the magnetosphere close enough to Earth, the high-energy electrons can damage satellites in orbit and trigger auroras. Scientists with NASA’s MMS (Magnetospheric Multiscale) mission study the electrons’ dynamics to better understand their behavior. A new study, published in Journal of Geophysical Research revealed a bizarre new type of motion exhibited by these electrons. 50) 51)
- Electrons in a strong magnetic field usually exhibit a simple behavior: They spin tight spirals along the magnetic field. In a weaker field region, where the direction of the magnetic field reverses, the electrons go free style — bouncing and wagging back and forth in a type of movement called Speiser motion. New MMS results show for the first time what happens in an intermediate strength field. Then these electrons dance a hybrid, meandering motion — spiraling and bouncing about before being ejected from the region. This motion takes away some of the field’s energy and it plays a key role in magnetic reconnection, a dynamic process, which can explosively release large amounts of stored magnetic energy.
- “MMS is showing us the fascinating reality of magnetic reconnection happening out there,” said Li-Jen Chen, lead author of the study and MMS scientist at NASA’s Goddard Space Flight Center in Greenbelt, Maryland.
- As MMS flew around Earth, it passed through an area of a moderate strength magnetic field where electric currents run in the same direction as the magnetic field. Such areas are known as intermediate guide fields. While inside the region, the instruments recorded a curious interaction of electrons with the current sheet, the thin layer through which the current travels. As the incoming particles encountered the region, they started gyrating in spirals along the guide field, like they do in a strong magnetic field, but in larger spirals. The MMS observations also saw signatures of the particles gaining energy from the electric field. Before long, the accelerated particles escaped the current sheet, forming high-speed jets. In the process, they took away some of the field’s energy, causing it to gradually weaken.
- The magnetic field environment where the electrons’ motions were observed was uniquely created by magnetic reconnection, which caused the current sheet to be tightly confined by bunched-up magnetic fields. The new results help the scientists better understand the role of electrons in reconnection and how magnetic fields lose energy.
- MMS measures the electric and magnetic fields it flies through, and counts electrons and ions to measure their energies and directions of motion. With four spacecraft flying in a compact, pyramid formation, MMS is able to see the fields and particles in three dimensions and look at small-scale particle dynamics, in a way never before achieved.
- “The time resolution of MMS is one hundred times faster than previous missions,” said Tom Moore, senior project scientist for MMS at NASA’s Goddard Space Flight Center. “That means we can finally see what’s going on in such narrow layers and will be able to better predict how fast reconnection occurs in various circumstances.”
- Understanding the speed of reconnection is essential for predicting the intensity of the explosive energy release. Reconnection is an important energy release process across the universe and is thought to be responsible for some shock waves and cosmic rays. Solar flares on the sun, which can trigger space weather, are also caused by magnetic reconnection.
- With two years under its belt, MMS has been revealing new and surprising phenomena near Earth. These discoveries enable us to better understand Earth’s dynamic space environment and how it affects our satellites and technology.
- MMS is now heading to a new orbit which will take it through magnetic reconnection areas on the side of Earth farther from the sun. In this region, the guide field is typically weaker, so MMS may see more of these types of electron dynamics.
• March 31, 2017: Kinetic Alfvén waves have long been suspected to be energy transporters in plasmas — a fundamental state of matter composed of charged particles — throughout the universe. But it wasn’t until now, with the help of NASA's MMS mission, that scientists have been able to take a closer look at the microphysics of the waves on the relatively small scales where the energy transfer actually happens. 52)
- A new finding, presented in a paper in Nature Communications, provides observational proof of a 50-year-old theory and reshapes the basic understanding of a type of wave in space known as a kinetic Alfvén wave. The results, which reveal unexpected, small-scale complexities in the wave, are also applicable to nuclear fusion techniques, which rely on minimizing the existence of such waves inside the equipment to trap heat efficiently. 53)
- “This is the first time we’ve been able to see this energy transfer directly,” said Dan Gershman, lead author and MMS scientist at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, and the University of Maryland in College Park. “We’re seeing a more detailed picture of Alfvén waves than anyone’s been able to get before.”
- The waves could be studied on a small scale for the first time because of the unique design of the MMS spacecraft. MMS’s four spacecraft fly in a compact 3-D pyramid formation, with just six kilometers between them — closer than ever achieved before and small enough to fit between two wave peaks. Having multiple spacecraft allowed the scientists to measure precise details about the wave, such as how fast it moved and in what direction it travelled.
- Alfvén waves are fundamental plasma wave modes that permeate the universe. At small kinetic scales, they provide a critical mechanism for the transfer of energy between electromagnetic fields and charged particles. These waves are important not only in planetary magnetospheres, heliospheres and astrophysical systems but also in laboratory plasma experiments and fusion reactors.
- As kinetic Alfvén waves move through a plasma, electrons traveling at the right speed get trapped in the weak spots of the wave's magnetic field. Because the field is stronger on either side of such spots, the electrons bounce back and forth as if bordered by two walls, in what is known as a magnetic mirror in the wave. As a result, the electrons aren't distributed evenly throughout: Some areas have a higher density of electrons, and other pockets are left with fewer electrons. Other electrons, which travel too fast or too slow to ride the wave, end up passing energy back and forth with the wave as they jockey to keep up.
- The wave’s ability to trap particles was predicted more than 50 years ago but hadn’t been directly captured with such comprehensive measurements until now. The new results also showed a much higher rate of trapping than expected.
- This method of trapping particles also has applications in nuclear fusion technology. Nuclear reactors use magnetic fields to confine plasma in order to extract energy. Current methods are highly inefficient as they require large amounts of energy to power the magnetic field and keep the plasma hot. The new results may offer a better understanding of one process that transports energy through a plasma.
- “We can produce, with some effort, these waves in the laboratory to study, but the wave is much smaller than it is in space,” said Stewart Prager, plasma scientist at the Princeton Plasma Physics Laboratory in Princeton, New Jersey. “In space, they can measure finer properties that are hard to measure in the laboratory.”
- This work may also teach us more about our sun. Some scientists think kinetic Alfvén waves are key to how the solar wind — the constant outpouring of solar particles that sweeps out into space — is heated to extreme temperatures. The new results provide insight on how that process might work.
- Throughout the universe, kinetic Alfvén waves are ubiquitous across magnetic environments, and are even expected to be in the extra-galactic jets of quasars. By studying our near-Earth environment, NASA missions like MMS can make use of a unique, nearby laboratory to understand the physics of magnetic fields across the universe.
- On 30 December 2015, the four MMS observatories were near the dayside magnetopause, that is, the interface between the interplanetary magnetic field and the Earth’s internal magnetic field, at [7.8, -6.9, 0.9] Re (1 Re=1 Earth radius=6,730 km). Magnetic reconnection at the magnetopause boundary generated a southward flowing exhaust at ~22:25 UT denoted by a -Vz jet, an increase in plasma density, and a decrease in plasma temperature (Figure 39). There was no discernable rotation in the magnetic field suggesting that the spacecraft constellation remained inside the Earth’s magnetosphere throughout this interval. Low frequency (~1 Hz) waves were observed in the exhaust in a ~4 min interval localized to a region of strong proton temperature anisotropy . MMS partially crossed the magnetopause into the magnetosheath for the first time at ~22:35 UT at [8.0, -6.9, 0.9] Re. For the subsequent ~2 h, multiple magnetopause crossings resulted in the MMS spacecraft sampling both +Vz and -Vz jets, that is, above and below the reconnection site. However, ~1 Hz waves were only observed in the short interval shown in Figure 39. The MMS observatories were in a tetrahedron configuration (quality factor ~0.9) separated by ~40 km, a distance which corresponded to a local thermal ion gyroradius (ρi=35 km).
Legend to Figure 39: (a) Illustration of the MMS constellation near the dayside magnetopause on 30 December 2015. MMS entered a southward flowing reconnection exhaust in the separatrix region on the magnetospheric (msp) side of the magnetopause. (b–i) Plasma parameters from MMS4 across the jet are shown from 22:23 to 22:30 UT. The density increased to ~10 cm-3 (d) and -Vz increased by ~200 km s-1 (e). No rotation in the magnetic field (B) indicated that the spacecraft remained inside the magnetosphere during this time period. Approximately 1 Hz waves (h,i) were observed to be localized in a region of enhanced ion temperature anisotropy. H+ dominated the ion composition during this time period.
• On February 9, 2017, NASA's MMS (Magnetospheric Multiscale) mission began a three-month long journey into a new orbit. MMS flies in a highly elliptical orbit around Earth and the new orbit will take MMS twice as far out as it has previously flown. In the new orbit, which begins the second phase of its mission, MMS will continue to map out the fundamental characteristics of space around Earth, helping us understand this key region through which our satellites and astronauts travel. MMS will fly directly through regions—where giant explosions called magnetic reconnection occur—never before observed in high resolution. 54)
- Launched on March 13, 2015, MMS uses four identical spacecraft to map magnetic reconnection – a process that occurs when magnetic fields collide and re-align explosively into new positions. NASA scientists and engineers fly MMS in an unprecedentedly close formation that allows the mission to travel through regions where the sun's magnetic fields interact with Earth's magnetic fields – but keeping four spacecraft in formation is far from easy.
- “This is one of the most complicated missions Goddard has ever done in terms of flight dynamics and maneuvers,” said Mark Woodard, MMS mission director at NASA’s Goddard Flight Space Center in Greenbelt, Maryland. “No one anywhere has done formation flying like this before.”
- To form a three-dimensional picture of reconnection, the mission flies four individual satellites in a pyramid formation called a tetrahedron. While a previous joint ESA (European Space Agency)/NASA mission flew in a similar formation, MMS is the first to fly in such an extremely tight formation – only four miles apart on average. Maintaining this close separation allows for high-resolution mapping but adds an extra dimension of challenge to flying MMS, which is already a complex undertaking.
- Flying a spacecraft, as one would suspect, is nothing like driving a car. Instead of focusing on just two dimensions – left and right, forward and backwards – you also must consider up and down. Add on to that, keeping the four MMS spacecraft in the specific tetrahedral formation necessary for three-dimensional mapping, and you’ve got quite a challenge. And don’t forget to avoid any space debris and other spacecraft that might cross your path. Oh, and each spacecraft is spinning like a top, adding another layer to the dizzying complexity.
- “Typically, it takes about two weeks to go through the whole procedure of designing maneuvers,” said Trevor Williams, MMS flight dynamics lead at NASA Goddard. Williams leads a team of about a dozen engineers to make sure MMS’s orbit stays on track. During a normal week of operations, the maneuvers, which have been carefully crafted and calculated beforehand, are finalized in a meeting at the start of the week.
- To calculate its location, MMS uses GPS, just like a smart phone. The only difference is this GPS receiver is far above Earth, higher than the GPS satellites sending out the signals. “We’re using GPS to do something it wasn’t designed for, but it works,” Woodard said.
- Since GPS was designed with Earth-bound users in mind, signals are broadcast downwards, making it difficult to use from above. Fortunately, signals from GPS satellites are sent widely to blanket the entire planet and consequentially some from the far side of the planet sneak around Earth and continue up into space, where MMS can observe them. Using a special receiver that can pick up weak signals, MMS is able to stay in constant GPS contact. The spacecraft uses the GPS signals to automatically compute their location, which they send down to the flight control headquarters at Goddard. The engineers then use that positioning to design the maneuvers for the spacecraft’s orbits.
- While the orbit for each MMS spacecraft is almost identical, small adjustments need to be made to keep the spacecraft in a tight formation. The engineers also rely on reports from NASA’s Conjunction Assessment Risk Analysis, which identifies the locations of space debris and provides notification when objects, like an old communications satellite, might cross MMS’s path. While nothing yet has been at risk for colliding with MMS, the crew has a prepared backup plan – a dodge maneuver – should the need arise.
- On scheduled Wednesdays, one or two per month, the commands are sent up to the spacecraft to adjust the tetrahedral formation and make any necessary orbit adjustments. These commands tell MMS to fire its thrusters in short bursts, propelling the spacecraft to its intended location.
- The new elliptical orbit will take MMS to within ~1000 km above the surface of Earth at its closest approach, and out to about 40 % of the distance to the moon. Previously, the spacecraft went out only one-fifth (20%) of the distance to the moon.
- In the first phase of the mission, MMS investigated the sun-side of Earth’s magnetosphere, where the sun's magnetic field lines connect to Earth's magnetic field lines, allowing material and energy from the sun to funnel into near-Earth space. In the second phase, MMS will pass through the night side, where reconnection is thought to trigger auroras.
- In addition to helping us understand our own space environment, learning about the causes of magnetic reconnection sheds light on how this phenomenon occurs throughout the universe, from auroras on Earth, to flares on the surface of the sun, and even to areas surrounding black holes.
- While MMS will not maintain its tetrahedral formation as it moves to its new orbit, it will continue taking data on the environments it flies through. The operations crew expects MMS to reach its new orbit on May 4, 2017, at which point it will be back in formation and ready to collect new 3-D science data, as its elliptical orbit carries it through specific areas thought to be sites for magnetic reconnection.
• November 4, 2016: NASA's MMS (Magnetospheric Multiscale) mission now holds the Guinness World Record for highest altitude fix of a GPS signal. Operating in a highly elliptical orbit around Earth, the MMS satellites set the record at 70,000 km above the surface. The four MMS spacecraft incorporate GPS measurements into their precise tracking systems, which require extremely sensitive position and orbit calculations to guide tight flying formations. 55)
- Earlier this year, MMS achieved the closest flying separation of a multi-spacecraft formation with only four-and-a-half miles between the four satellites. When the satellites are closest to Earth, they move at up to 35,400 km/hour, making them the fastest known operational use of a GPS receiver.
- When MMS is not breaking records, it conducts ground-breaking science. Still in the first year of its prime mission, MMS is giving scientists new insight into Earth’s magnetosphere. The mission uses four individual satellites that fly in a pyramid formation to map magnetic reconnection – a process that occurs as the sun and Earth’s magnetic fields interact. Precise GPS tracking allows the satellites to maintain a tight formation and obtain high resolution three-dimensional observations.
• May 12, 2016: A team led by SwRI (Southwest Research Institute) has made the first direct detection of the source of magnetic reconnection. Analyzing data from NASA’s MMS (Magnetospheric Multiscale) mission, scientists have observed how this explosive physical process converts stored magnetic energy into kinetic energy and heat. - With MMS a new ‘microscope’ has opened a new window to clearly see reconnection,” said James L. Burch, vice president of SwRI’s Space Science and Engineering Division and MMS principal investigator. “The four MMS satellites hone in on the role of electrons in magnetic reconnection, which allows two magnetic fields to interconnect. MMS measures the process 100 times faster than previously possible to clearly visualize the rapidly evolving process.” 56) 57) 58)
- In late summer 2015, the four identically instrumented MMS spacecraft began to survey the magnetopause. In this boundary between the solar wind and Earth’s magnetosphere, the scientists are searching for locations where the solar wind magnetic field and the terrestrial magnetic field reconnect. In half of the over 4,000 magnetopause encounters, MMS has seen evidence of reconnection, but most often the spacecraft did not pass through the reconnection sites themselves. Then on October 16, 2015, MMS flew through the heart of a reconnection region. “We hit the jackpot,” says Roy Torbert, MMS deputy principal investigator and director of SwRI’s Earth, Oceans, and Space office at the University of New Hampshire. “The spacecraft passed directly through the electron dissipation region, and we were able to perform the first-ever physics experiment in this environment.”
- MMS measures plasmas, hot ionized gases consisting of approximately equal numbers of positively charged ions and negatively charged electrons. The solar wind and Earth’s magnetospheric plasmas are both magnetized. For reconnection to occur, the plasmas become “demagnetized” — that is, the plasma and the magnetic field become decoupled. The critical and final stage in this process occurs in a relatively small region in space known as the “electron dissipation region.” As the electrons become demagnetized, the magnetic fields of the Sun and the Earth interconnect and the solar wind and magnetospheric plasmas mix.
- Magnetic reconnection — which occurs in both natural plasma environments and laboratory plasma and fusion experiments — is at the heart of space weather. Reconnection is responsible for explosive solar events, such as solar flares and coronal mass ejections, and drives disturbances in Earth’s space environment. Such disturbances produce spectacular auroras, but can also shut down electrical power grids and disrupt satellite-based communication and navigation systems.
- “We’ve studied it theoretically, and we’ve simulated it with supercomputers. But up to now we haven’t known what controls the conversion of magnetic energy into particle energy,” said Burch. “We designed the MMS mission to use Earth’s magnetosphere as a giant laboratory to perform the definitive experiment on reconnection.” Examining the data from the encounter, the MMS team saw a drop in the magnetic field to near zero, oppositely directed ion flows, accelerated electrons, an enhanced electric field, and a strong electrical current — all indications that the spacecraft had entered the dissipation region. The tell-tale signature of reconnection, however, was a spike observed in the electric power generated by the electrons. “This was the ‘smoking gun’ for reconnection,” explains Burch. “It was theoretically predicted but never seen until MMS.”
- Another feature observed for the first time by MMS as it traversed the dissipation region was a rapid change in the electrons as they streamed into the dissipation region and were accelerated outward along field lines opened during reconnection. This observation was the first definitive measurement of the interconnection of the solar and terrestrial magnetic fields.
• On March 13, 2016, the MMS constellation of NASA was 1 year on orbit. 59)
• Dec. 18, 2015: Just under four months into the science phase of the mission, MMS is delivering promising early results on a process called magnetic reconnection — a kind of magnetic explosion that’s related to everything from the northern lights to solar flares. The unprecedented set of MMS measurements will open up our understanding of the space environment surrounding Earth, allowing us to better understand what drives magnetic reconnection events. These giant magnetic bursts can send particles hurtling at near the speed of light and create oscillations in Earth's magnetic fields, affecting technology in space and interfering with radio communications. Scientists from the Southwest Research Institute, NASA, the University of Colorado Boulder and the Johns Hopkins University Applied Physics Laboratory presented an overview of MMS science and early results on Dec. 17, 2015, at the American Geophysical Union’s Fall Meeting in San Francisco. 60)
- MMS’ four instrument suites and incredible measurement rates — a hundred times faster than ever before on certain instruments — is giving scientists their best look ever at magnetic reconnection. In fact, the mission's high resolution produces so much data it requires a scientist on duty during every MMS contact to prioritize which data is sent down from the spacecraft.
- One of the key features of MMS is its scaling ability. The four spacecraft fly in a four-sided, pyramid-shaped formation called a tetrahedron, allowing them to build up three-dimensional views of the regions and events they fly through. Because the four spacecraft are controlled independently, the scale of their formation — and their observations — can be zoomed in or out by a factor of ten.
- “We can see the effects of reconnection on the sun in the form of coronal mass ejections and solar flares,” said Michael Hesse, lead co-investigator for theory and modeling on the MMS mission at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. “But with MMS, we’re finally able to observe the process of magnetic reconnection directly.”
- Magnetic reconnection is a process in which magnetic fields reconfigure suddenly, releasing huge amounts of energy. When magnetic field lines snap and join back together in new formations, some of the energy that was stored in the magnetic field is converted to particle energy in the forms of heat and kinetic energy. “Reconnection is a fundamental energy release process,” said Hesse. “It impacts both the temperature and speed of particles in a plasma, two of the defining characteristics.”
- Katherine Goodrich, a graduate student at the University of Colorado Boulder, is working with measurements from a suite of six instruments to characterize the behavior of electric and magnetic fields at magnetic reconnection sites. This suite of instruments, the FIELDS suite — duplicated on each of the four MMS spacecraft — contains six sensors that work together to form a three-dimensional picture of the electric and magnetic fields near the spacecraft. This suite has a very high accuracy, in part due to the very long booms on each sensor. “The long booms allow us to measure the fields with minimal contamination from the electronics aboard the spacecraft,” said Goodrich. Along the spin plane, the booms measure 400 feet from end to end — longer than a regulation soccer field. The booms on the axis of spin measure 100 feet from end to end.
- Ian Cohen, a postdoctoral fellow at JHU/APL (Johns Hopkins University /Applied Physics Laboratory), uses a different instrument suite to identify and study the telltale particle behaviors that come with magnetic reconnection. Cohen works with two particle detectors aboard MMS: the FEEPS ( Fly's Eye Energetic Particle Sensor), and the Energetic Ion Spectrometer. The measurements are providing evidence for a mechanism by which particles can escape the Earth system and join the interplanetary medium.
- When magnetic reconnection happens on the day-side, magnetic field lines from the sun connect directly to Earth's magnetic field. "The linking of these magnetic fields means that particles can drift from within the magnetosphere to the boundary between Earth's magnetic field and the solar wind," said Cohen. "Once they get to that boundary, further reconnection events allow them to escape and float along the interplanetary magnetic field."
• Sept. 18, 2015: The MMS Navigator system exceeded all of the team’s expectations. At the farthest point of the MMS orbit of 70,000 km, Navigator was able to receive signals from the GPS satellites and perform onboard navigation solutions. At the lowest point of the MMS orbit, Navigator traveled at velocities over 35,000 km/hr. In comparison, GPS satellites orbit at ~20100 km away from the earth and travel at 13,840 km/hr, and most satellites using GPS receivers are in LEO (Low Earth Orbits) at altitudes between 180 and 2000 km. 61)
- The Navigator system will be even more important during the second phase of the MMS mission when the orbit will double in size and travel all the way out to 153,000 miles from Earth.
• Sept. 4, 2015: The MMS mission successfully completed the commissioning activities on Sept. 1, 2015, and is now in full science mode. During the next six months, the four MMS spacecraft will fly in a tetrahedral formation that will skim Earth’s magnetopause near every apogee, sampling that boundary and the myriad of plasma processes that occur there. The primary focus for the MMS science team will be one of the most important and least understood of those processes: Magnetic Reconnection. Magnetic reconnection occurs when magnetic fields around Earth connect and disconnect, explosively releasing energy. 62)
• July 29, 2015: The four spacecraft of NASA’s MMS mission began flying in a pyramid shape for the first time on July 9, 2015 . The four-sided pyramid shape—called a tetrahedron—means that scientists’ observations will be spread out over three dimensions. 63)
• July 9, 2015: MMS instruments have been activated and commissioning activities are resuming following exit of the long eclipse period. 64)
- MMS successfully executed all procedures during the leap second event introduced on June 30, 2015.
- MMS completed a major milestone with the planned execution of maneuvers to start MMS formation flying in a 160 km spaced tetrahedron.
- At the highest point of the MMS orbit, at more than 70,000 km above the surface of the Earth, the Navigator set a record for the highest-ever reception of signals and onboard navigation solutions by an operational GPS receiver in space.
- At the lowest point of the MMS orbit, the Navigator set a record as the fastest operational GPS receiver in space, at velocities over 34,500 km/hr.
A precise tracking system is crucial for MMS, which requires extremely sensitive position and orbit calculations. The four spacecraft must fly in a tight pyramid formation to gather science data as they move through Earth's magnetic environment. The formation is required to obtain 3-dimensional observations of a phenomenon called magnetic reconnection that occurs when magnetic fields from the sun connect and disconnect with magnetic fields of Earth, which can allow energy and solar material to funnel into near-Earth space. With its instrument booms deployed, each spacecraft is the size of a baseball field — while flying as close as 10 km from each other.
Tracking spacecraft can be done by radar stations from the ground, but it's much more expensive and takes longer than an inflight system. However, using GPS as is typically done on Earth by such things as cars, boats and smart phones isn't nearly as simple for something like MMS. For one thing, the bulk of its highly-elliptical orbit occurs above where the GPS transmitters orbit. So MMS must have specialized, extremely sensitive receivers to capture GPS signals transmitted from the far side of Earth. In addition the MMS spacecraft spin; each one makes three revolutions per minute.
In the first month after launch, the MMS team began turning on and testing each instrument and deploying booms and antennas. During this time, the team compared the Navigator system with ground tracking systems and found it to be even more accurate than expected. At the farthest point in its orbit, some 70,000 km away from Earth, the Navigator can determine the position of each spacecraft with an uncertainty of better than 15 m.
What's more, the receivers on MMS have turned out to be strong enough that they consistently track transmissions from eight to 12 GPS satellites – excellent performance when compared to pre-flight predictions that there might be frequent drop outs during each orbit.
Even if the receiver were to lose all GPS signals for part of the orbit, Navigator is specifically designed to handle such dropouts. By gathering as many observations as possible, integrated software called GEONS (Goddard Enhanced Onboard Navigation System) can still compute the orbit by incorporating additional information including drag force, gravity, and solar radiation pressure.
This system will be even more important during the second phase of the MMS mission when the orbit will double in size and travel all the way out to 153,000 km from Earth.
While Navigator technology and GPS receivers were previously flown for testing and to help navigate a low-earth-orbit mission, this is the first time that the complete Navigator package has been used to actively navigate a high-altitude mission. Now that the team knows it works so well, Navigator can be used for other missions that travel in similar high orbits (Ref. 65).
- The Spin-plane Double Probe 60 m wire boom deployments were completed on all Observatories on April 23. The MMS Fields (electric and magnetic field instruments) investigation is now fully operational in the spin-plane and all - the data looks good.
- The Axial Double Probe 12.5 m boom deployments are scheduled to begin the evening of April 26. These carry electric field instruments and will complete the 3-dimensional Fields investigation sensor deployments.
- The data downlink sequence issue has been resolved, with repeated error-free performance during Deep Space Network passes.
• April 07, 2015: The MMS constellation’s orbit, spin rates and attitudes are all nominal. 69)
- All spacecraft subsystems continue to perform well. Final perigee raising maneuvers have been completed.
- Low voltage checkout has been completed on all MMS instruments. High Voltage activation of Fields Electron Drift Instruments is nearing completion. Instrument activation is proceeding as planned. Spin plane Double Probe wire boom deployments began April 4.
• March 19, 2015: The four MMS observatories were inserted with perfect accuracy and attitude into our initial orbit by the Atlas-Centaur AV-53. The separations and spin rates were exactly as planned. All spacecraft systems are operating nominally with no problems. The Navigator GPS system is exceeding its required performance, tracking more GPS vehicles at greater distances than the baseline mission required. This has potential benefits to the MMS science mission. During the past week attitude and spin rate maneuvers were performed as planned and the system performance (spin rate changes, nutation, damping) matched pre-flight predications extremely well. This indicates that the Observatory mass properties, spin- balancing, and control system design are all essentially perfect. The Instrument Suite command and control electronics were powered-on and are operating nominally with no significant problems, instrument activation is proceeding along the planned commissioning timeline. The 8 Axial Double Probe (ADP) Receiving Elements (RE) were successfully deployed although the ADP Booms remain stowed as planned. All 8 Magnetometer Booms were successfully deployed and the Magnetometers are performing nominally. The magnetometer data shows that the MMS observatories achieved the desired level of magnetic cleanliness with the observatories being nearly invisible to the deployed magnetometers. 70)
• March 13, 2015: After reaching orbit, each spacecraft deployed from the rocket’s upper stage sequentially, in five-minute increments, beginning at 05:16 UTC , with the last separation occurring at 05:31 UTC. NASA scientists and engineers were able to confirm the health of all separated spacecraft at 05:40 UTC. Craig Tooley, the project manager at NASA/GSFC said: “I am speaking for the entire MMS team when I say we’re thrilled to see all four of our spacecraft have deployed and data indicates we have a healthy fleet.”
- Over the next several weeks, NASA scientists and engineers will deploy booms and antennas on the spacecraft, and test all instruments. The observatories will later be placed into a pyramid formation in preparation for science observations, which are expected to begin in early September (Ref. 17) .
Sensor complement: (ADP, AFG, ASPOC, CEB, CIDP, DES, DFG, DIS, EDI, EIS, FEEPS, HPCA, IDPU, SCM SDP)
SMART (Solving Magnetospheric Acceleration, Reconnection, and Turbulence) is the name of the MMS science investigation program headed by James L. Burch of SWRI as PI (Principal Investigator) in cooperation with researchers from other institutions. 71) 72) 73) 74) 75) 76) 77) 78)
The SMART payload comprises three instrument groups: Hot Plasma, Energetic Particles, and Fields. In addition, the payload includes two ASPOC (Active Spacecraft Potential Control Devices) and a CIDP (Central Instrument Data Processor). The ASPOCs neutralize the electrical potential of the spacecraft, allowing measurement of low-energy ions and electrons by the plasma instruments and eliminating spurious electric fields that can contaminate double-probe measurements. The CIDP provides the interface between the instruments and the spacecraft C&DH subsystem. The ASPOCs are being developed at the IWF (Institut fuer Weltraumforschung) of the Austrian Academy of Sciences; the CIDP is being developed at Southwest Research Institute (SwRI).
Identical in situ instruments on each satellite measure:
• Hot plasma composition.
• Energetic particles
• Electric and magnetic fields
Legend to Figure 45: The organization was developed to give team PMs (Project Management) cost and schedule ownership.
Hot Plasma composition suite: (FPI, DIS, DES, HPCA)
• FPI (Fast Plasma Instrument): The FPI consists of DIS (Dual Ion Sensors) and DES (Dual Electron Sensors) and measures 3D ion and electron flux distributions over the energy range ~10 eV to 30 keV with an energy resolution of 20%. Electrons will be measured with a time resolution of 30 ms, ions with a time resolution 150 ms. The FPI development is led by Co-I Tom E. Moore (GSFC). FPI partners: SwRI, JAXA/ISAS, CESR, MSFC, Meisei Electric Co., SPEI. 81)
FPI observes the fast-moving plasma. Incoming particles pass through a filter which cherry picks certain particle speeds and directions and allows them to pass through to a sensor plate. When an incoming particle hits the sensor plate, some million electrons come out the other side, so the instrument can detect the event. The whole process takes several nanoseconds. By separately measuring electrons and ions, and by filtering for specific energies, FPI can count the number of particles of each kind entering the instrument from a range of directions at different energies during any given time span.
Each of the MMS spacecraft will carry four FPIs, so there are 16 DIS instruments total. They will be paired with 16 DES (Dual Electron Spectrometers) and 6 IDPUs (Instrument Data Processing Units) that are being built at Goddard to complete the full FPI.
In combination, FPI – consisting of the four dual electron spectrometers, the four dual ion spectrometers (DIS), and one data processing unit — will produce a three-dimensional picture of the ion plasma every 150 ms and of the electron plasma every 30 milliseconds. These frame rates are similar to those used in video and a factor of 100 times faster than what has been accomplished before for electrons.
The dual electron spectrometers (DES) and the processing unit, or IDPU, were built at NASA Goddard. The dual ion spectrometers were built by Meisei Electric in Gunma, Japan, under the direction of the Institute of Space and Aeronautical Sciences, a part of JAXA.
• HPCA (Hot Plasma Composition Analyzer): The HPCA employs a novel RF technique to measure minor ions such as oxygen and helium in regions of high flux. Energy range = ~10 eV to 30 keV; energy resolution = 20%; time resolution = 15 s. HPCA development is led by Co-I David T. Young (SwRI).
The HPCA is a toroidal top-hat electrostatic analyzer coupled to a TOF (Time-of-Flight) mass spectrometer. The instrument will take quick measurements at the mass resolution that can accurately separate and identify the minute amounts of hydrogen, helium, and oxygen ions from the magnetosphere. Furthermore, the instrument will also have several features essential to space travel: robustness, low-power requirements, and minimal mass.
The HPCA also has a unique capability never before flown. There are usually so many solar wind protons compared to, for example, magnetospheric oxygen that mass spectrometers flown in the past were overwhelmed — and the oxygen signal was masked. HPCA uses radio frequency oscillations to sweep the majority of solar wind protons away from the detector, without affecting the magnetospheric oxygen, resulting in a 10- to 100-fold improvement in detection.
EPD (Energetic Particles Detector Suite): (FEEPS, EIS)
Magnetic reconnection causes both a bulk flow of plasma – not unlike a blowing wind — and also can pump up a small subset of the charged plasma particles to incredibly high speeds and energies. The details of this latter process remain undetermined, although many theories have been suggested. The Energetic Particles Detector Suite will help distinguish between the theories and help determine whether this acceleration only works for electrons or also for heavier particles, the charged atoms known as ions. Short-term bursts of incredibly fast ions have been observed in the magnetic tail trailing behind Earth, and it is possible that these are due to magnetic reconnection as well. The electrons and ions detected by the EPD suite have energies far exceeding those detectable by FPI and HPCE. Together, the three sets of instruments are necessary to observe the full range of charged particles associated with magnetic reconnection.
EPD also remotely senses the structure of the larger space environment surrounding reconnection sites. Many of the sensors on MMS measure the material its flying through directly, but EPD can observe particles coming in from far away, as it tracks ions that move along giant circles, often larger than 3000 km in diameter, and very fast electrons that move up to 80% the speed of light.
EPD observes these high-speed particles through two instruments:
• FEEPS (Fly's Eye Energetic Particle Sensor): The two FEEPS devices will measure 3D energetic ion and electron flux distributions over the energy ranges ~25 keV to 500 keV (electrons) and ~45 keV to 500 keV (ions). Time resolution = 10 s. FEEPS development is led by Co-I J. Bernard Blake (The Aerospace Corporation).
The primary goal of FEEPS is to obtain nearly instantaneous all-sky measurements of how many electrons of different energies and different arrival directions are present. The instrument relies on solid state detectors made of silicon, a semiconductor much like those used in computer electronic systems. Whenever a charged particle hits the detector, it initiates a current that can be used to measure the energy of the original particle. There are two FEEPS instruments per spacecraft, and together they provide 18 views in different directions simultaneously, giving rise to the "fly's eye" in the instrument's name. FEEPS has two sets of sensors, one for electrons and one for ions. The solid state detectors within each of the electron "eyes" are covered by a 2 µm aluminum foil, which keeps out the ions. The detectors for the ion views, on the other hand, have no aluminum foil and are exceedingly thin so that electrons generally pass through without leaving a detectable signal.
• EIS (Energetic Ion Spectrometer): EIS uses a time-of-flight/pulse-height sensor to provide ion composition measurements (protons vs. oxygen ions) and angular distributions over the energy range ~45 keV to 500 keV and with a temporal resolution of 30 s. EIS development is led by Co-I Barry H. Mauk (Applied Physics Laboratory), who also heads the Energetic Particle investigation as a whole.
The EIS device also gathers all-sky measurements of the energetic ions, gathering information about their energy, their arrival direction and their mass. EIS can determine the mass of these particles by measuring their velocity and total energy. The mass information helps determine how many protons, helium and oxygen ions are present at energies above those reachable by HPCE.
To measure the energy, EIS uses a solid state detector like the one on FEEPS. Velocity is measured using two very thin foils and a microchannel plate sensor. When an ion travels through the first foil it knocks a few electrons off. These electrons are deflected toward the microchannel plate, which can amplify the signal, sending 1 million electrons out the other side — just like the detectors used in the plasma suite. The ion continues traveling to the second foil, where a similar process occurs. By determining the time of flight between electron detection at the first and second foils, the instrument can determine the velocity of the original incoming particle.
Combining the comprehensive ion measurements of EIS with the simpler ion measurements on FEEPS allows researchers to determine the ion properties at a faster rate of 1/3 of a spacecraft spin, a cadence that will sometimes be needed in the vicinity of fast changing reconnection sites.
FIELDS sensor suite: (AFG, DFG, EDI, SPD, ADP, SCM, CEB)
The FIELDS investigation is an advanced suite of six sensors to measure critical electric and magnetic fields in and around reconnection regions. The investigation is led by Co-I Roy B. Torbert of UNH (University of New Hampshire). 82) 83)
• AFG (Analog Fluxgate) and DFG (Digital Fluxgate) Magnetometers: The AFG and DFG sensors are provided by UCLA and the Technical University of Braunschweig, respectively. C. T. Russell (UCLA) has overall responsibility for fluxgate development. The two different kinds of magnetometers will provide redundant measurements of the magnetic field and current structure in the diffusion region.
The fluxgate magnetometers provide two sets of similar measurements. The fluxgates carry a permeable material that changes properties in response to the presence of magnetic fields. Measuring how they change can be correlated to strength of the field down to a half a nanotesla – typical fields in the regions of interest will be about 50 nanotesla.
• EDI (Electron Drift Instrument): The EDI determines the electric and magnetic fields by measuring the drift of ~1 keV electrons emitted from the GDU (Gun Detector Unit). Each GDU sends (receives) a coded beam to (from) the other EDI-GDU. The EDI gun is being developed at the Institut fuer Weltraumforschung of the Austrian Academy of Sciences; EDI optics are being developed at the University of Iowa.
The EDI instrument measures both the electric and magnetic fields by tracking the path of electron beams through space. EDI sends a beam of electrons out into space using each of its two Gun Detector Units. In the presence of magnetic fields, electrons travel in orbits that are nearly circles, so over the course of about half a mile, the electron beam curves around on itself until it comes back in to the second Gun Detector Unit. By measuring how long it takes the electrons to circle back, one can calculate the strength of the magnetic fields through which the beam traveled.
When electric fields are present as well, the electron beam will not make a perfect circle, but will drift in a predictable way as it returns. By measuring the size of that sideways drift, one can calculate the strength of the electric fields.
This technique of correctly capturing the electron beam was successfully demonstrated by the joint ESA/NASA Cluster mission. On MMS, the EDI will take faster measurements than on Cluster. Its strength, however, is not in its speed but in its precision. Knowing the displacement of the particles in space due to an electron field is crucial for accurate measurements by other instruments aboard MMS.
If needed, EDI can also be used solely as a detector, measuring all incoming electrons from space as opposed to just tracking its own specialized electron beam. In this case, EDI can make observations at rates of up to 1,000 times a second.
• Double Probe (SDP/ADP): MMS requires two sets of double-probe instruments:
- The SPD (Spin-plane Double Probe ) consists of four 48 m wire booms with spherical sensors at the end. The SDP assembly is provided by KTH (Royal Institute of Technology) Stockholm and by IRF-U (Swedish Institute of Space Physics-Upsalla), Sweden (Ref. 76).
No of units, mass, power
4, 1.5 kg/unit, 330 mW/unit
Measurement range, resolution, accuracy
DC-100 kHz, 1 ms, 0.3 mV/m
Total length of boom
2.5 cm x 8 cm
- The ADP (Axial Double Probe), developed at LASP of the University of Colorado and the University of New Hampshire, consists of two 10 m antennas deployed axially near the spacecraft spin axis. The SDP and ADP provide full 3D electric field measurements over a range from DC to 100 kHz with an accuracy of 1 mV/m.
MMS carries two sets of double-probe instruments. Each measures the voltage between two electrodes to determine the electric field. As the field changes are quite small, the electrodes must be set as widely apart as possible to provide a robust signal. Thus the double probes sensors reside at the ends of very long booms that deploy away from the main body of each observatory after they are launched.
• SCM (Search Coil Magnetometer): The SCM will measure the 3-axis AC magnetic field up to 6 kHz and will be used together with the ADP and SDP to determine the contribution of plasma waves to the turbulent dissipation that occurs in the diffusion region. The SCM is being developed at CETP (Centre d'etude des Environnements Terrestre et Planetaires) Velizy/ Saint-Maur, France.
The SCM provides direct measurements of changes in the magnetic fields, using something called an induction magnetometer. The magnetometer contains a coil of wire around a ferromagnetic material. It is a basic law of physics that a changing magnetic field near such a coil will induce a voltage. This voltage, in turn, can be used to measure how the magnetic field changes.
• CEB (Central Electronics Box): The CEB provides power, control and data processing for the Fields sensor suite. KTH (Royal Institute of Technology) provides the power supply. UNH provides the CEB and the software with contributions from the sensor team institutions: KTH, LASP, UCLA and IWF.
All the FIELDS measurements are coordinated, collected, and transmitted from a central electronics system. This set of electronics was the responsibility of the University of New Hampshire, the Royal Institute of Technology, the University of California in Los Angeles, the University of Colorado, and the Space Research Institute of the Austrian Academy of Sciences in Graz, Austria.
ASPOC (Active Spacecraft Potential Control Device):
The ASPOC instrument on MMS has technical and scientific heritage from ESA’s Cluster and joint ESA/CNSA (Chinese National Space Administration) Double Star space missions. On each MMS spacecraft are two ASPOCs, the generated indium ion beams (energy range ~ 4-12 keV, currents up to 70 µA, antiparallel direction) limit the spacecraft potential to several volts positive. An instrument consists of the electronics box with the digital-, low voltage-, and high voltage boards (stacked frames) and two cylindrical emitter modules, all units are mechanically connected.
Figure 50 shows the instrument with electrically equivalent dummies replacing the real emitter modules. Each emitter module contains two ion emitters connected to a common high voltage supply. The cable harness is routed outside the electronics box and during operation only one ion emitter is switched active. In the final configuration the MLI (Multi-Layer Insulation) of the spacecraft is connected to the ion emitter modules via a plate, i.e. except the emitters the instrument is inside the spacecraft envelope mounted on the instrument deck. 84)
EMC strategy: During development of the instrument – in order to get an in-house electromagnetic emission baseline – routine EMC pre-compliance measurements and sniff testing where performed in the frequency range up to 1 GHz (the digital clock of the instrument is 12 MHz). The ASPOC instruments for MMS — 8 flight models (FMs), and the engineering-qualification model (EQM) — have to be verified in EMC and magnetic tests. The test matrix (major items: structural / mechanical, EMC and magnetics, thermal / vacuum, calibration and general verifications) is slightly different for the EQM, FM1 and FM2-8, the basic principle is that all tests are in flight-like conditions. - The ASPOC EQM instrument for the MMS mission fulfills the EMC requirements.
The MMS ground system supports on-orbit operations of the MMS observatories, as well as the production, storage, management, and dissemination of MMS science data products. The MMS ground system consists of the following functional elements:
• MOC (Mission Operations Center), located at GSFC (Goddard Space Flight Center) in Greenbelt, MD. Responsible for spacecraft operations and telemetry capture.
• FDOA (Flight Dynamics Operations Area), located at GSFC. Responsible for orbit and attitude determination and control.
• SOC (Science Operations Center), located at LASP (Laboratory for Atmospheric and Space Physics) of the University of Colorado, Boulder, CO. Responsible for IS (Instrument Suite) operations, instrument data processing, archiving, and distribution.
• SMART ITF (Instrument Team Facilities). Instrument teams are responsible for data analysis and validation; instrument monitoring and special operations requests; software for producing Quicklook and Level-2 data products; Level-2 data processing; analysis tools for publicly available data products.
• EPO (Education and Public Outreach), located at Rice University, Houston, TX. Responsible for dissemination of educational materials to schools and the general public.
AGS (Attitude Ground System)
The AGS is one of the components within the MOC (Mission Operations Center) providing flight dynamics support to the MMS mission. The AGS is responsible for determining and predicting the spacecraft attitude, providing support to the mission operations team to keep the spin axis orientation within the target tolerance. The AGS is also essential for validation of the onboard attitude and body rate estimates, sensor interference predictions, and sensor and inertia tensor calibrations to improve the accuracy of the ground and onboard attitude solutions. 86)
The AGS functionalities required and designed for MMS support include:
• Estimation and validation of the spacecraft attitude and body rates using an extended Kalman filter.
• Attitude and sensor interference prediction with the use of a smart targeting algorithm.
• Maneuver planning and scheduling support to stay within the science attitude requirements.
• Calibration of mass properties (inertia tensor and center of mass) to improve ground and flight attitude determination solutions.
• Sensor alignment calibrations, such as DSS to Star Sensor and relative Star Sensor Camera Head alignments.
Although the core of the AGS could either be the MTASS (Multi-mission Three-Axis Stabilized Spacecraft) system , or the MSASS (Multi-mission Spin Stabilized Spacecraft) system, the former was selected as the baseline for the MMS AGS with features and capabilities added to support spin-stabilized spacecraft and satisfy MMS mission requirements. The MMS spacecraft are spinners with an autonomous quaternion-output STS (Star Tracker System) that make possible the determination of full three-axis attitudes, instead of just the single spin-axis direction.
This wide variety of features place the AGS at the heart of a powerful and invaluable ground support system that has been used for nominal operations, calibrations, data analyses, as well as anomaly resolution of over two dozen missions. The oldest parts of the AGS were written in FORTRAN in the 1970s and 1980s. The generalized multi-mission version was created in the early 1990s and was used to support, e.g., the UARS (Upper Atmosphere Research Satellite), EUVE (Extreme Ultraviolet Explorer), and RXTE (Rossi X-ray Timing Explorer) missions. The AGS software was ported to MATLAB in the late 1990s.
The MMS spacecraft attitude requirement is 0.1 deg (3σ) per axis for both phases of the mission. The resulting history of the spacecraft attitude and body rates is called the definitive attitude. This definitive attitude is generated using quaternion solutions from each of the four sensor heads output by the STS at 0.5 to 4 Hz, depending on the telemetry downlink rate. The STS heads are mounted in pairs on two separate stable optical benches and are oriented roughly 10º off the body -Z axis. This orientation was chosen to minimize star motion through the FOVs (Fields of View) and to avoid interference from an axial sensor boom deployed along the –Z axis direction. An alignment transformation is applied to the output from each STS camera head so that the final output quaternions represent the GCI (Geocentric Inertial) frame to spacecraft body frame transformation.
In summary, the existing functionalities and new utilities implemented in the AGS have proven to be essential for MMS mission support in many ways. The support has included validation of the onboard spacecraft attitude and rate estimates, calibration of the star camera head alignments, calibration of the direction of the major principal axis of inertia, and attitude maneuver planning of “smart targets” to stay within the mission science target box. The AGS capabilities have enabled the proper identification of error sources for improving the attitude and body rate solutions, including thermal variations and sensor interferences that affect the attitude solutions.
The AGS was also used to perform some special analyses to support the mission. Namely, a long-term planning tool was developed in order to cope with the long shadow period near the beginning of the mission, and a method of sensor interference prediction was developed after observing unexpected sensor noise in the STS. It was found that the existing functionalities of the AGS and its library routines could be readily extended to solve both of these special-case problems.
Although there is high dependency of the attitude and rate solutions on the accuracy of the STS alignments and the knowledge of the inertia tensor, the SpinKF has performed very well to meet the MMS estimation tolerances. The dependency arises first from a need for self-consistent observations. These are provided by the relative STS alignment calibrations. Secondly, the use of Euler’s equations of motion to propagate the state between observations requires a good inertia tensor. The MPA calibrations performed after every burn ensure the AGS always is using the best available inertia tensor and coning angle estimate. With these calibrations, the definitive attitude reports generated using the SpinKF have been delivered to the scientists daily, covering every orbit perigee-to-perigee, with the best available attitude accuracy.
It was known from early tests that there is coupling between the estimates for the STS alignments and the MPA direction. This was dealt with by iterating between these two calibrations. Once a set of STS alignments were found that made the four STS camera head measurements consistent, these alignments have been used both onboard and in the AGS. These alignments, in effect, define the MMS body frame, and the MPA calibrations have been performed relative to this frame ever since the alignments were uplinked.
The AGS requirement to support maneuver planning drove the need to predict the precession of the angular momentum for up to several weeks at a time. The AGS utility to predict the attitude relies on good knowledge of the inertia tensor along with an environmental torque model. This model has been shown to predict the spin axis direction very accurately, with an error of only 0.01º after a one-month propagation.
In summary, the AGS suite of utilities has been crucial to satisfying the MMS mission requirements, and has been used to provide good ground attitude determination and support to the mission during spacecraft commissioning and nominal operations.
1) “The Magnetospheric Multiscale Mission,” NASA, URL: http://mms.gsfc.nasa.gov/mission_details.html
4) “Quick Facts: Magnetospheric MultiScale (MMS),” LASP, URL: http://lasp.colorado.edu/home/about/quick-facts-mms/
5) David M. Klumpar and the Magnetospheric Multiprobe Mission Team, “ NASA's Four Spacecraft Magnetospheric Multiscale Mission - Understanding the Physics of the Cosmos from our own Backyard,” Guest Lecture, Proceedings of the 27th AIAA/USU Conference, Small Satellite Constellations, Logan, Utah, USA, Aug. 10-15, 2013, URL: http://digitalcommons.usu.edu/cgi/viewcontent.cgi?article=2995&context=smallsat
6) “NASA Mission to Study Magnetic Explosions Passes Major Review,” Science Daily, Sept. 5, 2012, URL: http://www.sciencedaily.com/releases/2012/09/120905162242.htm
8) “NASA's Magnetospheric Mission Passes Major Milestone,” NASA, Sept. 3, 2010, URL: http://www.nasa.gov/topics/solarsystem/sunearthsystem/main/mms-cdr.html
13) Joseph E. Sedlak, Emil A. Superfin, Juan C. Raymond, “Magnetospheric MultiScale (MMS) Mission Attitude Ground System Design,” 22nd International Symposium on Spaceflight Dynamics, INPE, São José dos Campos, SP, Brazil, February 2011, URL: http://www.ai-solutions.com/Portals/0/AI%20Docs/Technical%20Paper%20Library%20pdf/2011/Magnetospheric_Multicale_%28MMS%29_Mission_Attitude_Ground_System_Design.pdf
14) Karen C. Fox, “NASA Embraces the Challenge of Building Four Spacecraft to Study Magnetic Reconnection,” NASA, Feb. 25, 2014, URL: http://www.nasa.gov/content/goddard/nasa-embraces-the-challenge-of-building-four-spacecraft-to-study-magnetic-reconnection/#.UxAnPs7ihqM
15) “NASA's MMS Observatories Stacked For Testing,” NASA, April 18, 2014, URL: http://www.nasa.gov/content/goddard/MMS-stack/#.U1dE3qKegkA
16) Ken Kremer, “NASA’s Magnetospheric Multiscale Mission to Provide 1st 3-D View of Earth’s Magnetic Reconnection Process – Cleanroom visit with Bolden,” Universe Today, May 14, 2014, URL: http://www.universetoday.com/111852/nasas-magnetospheric-multiscale-mission-to-provide-1st-3-d-view-of-earths-magnetic-reconnection-process-cleanroom-visit-with-bolden/
17) Dwayne Brown, Susan Hendrix, “NASA Spacecraft in Earth’s Orbit, Preparing to Study Magnetic Reconnection,” NASA, Release 15-043, March 13, 2015, URL: http://www.nasa.gov/press/2015/march/nasa-spacecraft-in-earth-s-orbit-preparing-to-study-magnetic-reconnection/#.VQKdkeH-b_U
18) Dwayne Brown, Susan Hendrix, “NASA Spacecraft Prepares for March 12 Launch to Study Earth’s Dynamic Magnetic Space Environment,” NASA, Release 15-024, URL: http://www.nasa.gov/press/2015/february/nasa-spacecraft-prepares-for-march-12-launch-to-study-earth-s-dynamic-magnetic/#.VO6c5-H-Y_c
20) Steven P. Hughes, “Formation Design and Sensitivity Analysis for the Magnetospheric Multiscale Mission (MMS),” AIAA/AAS Astrodynamics Specialist Conference and Exhibit, August 18-21, 2008, Honolulu, Hawaii, USA, paper: AIAA 2008-7357
21) Conrad Schiff, Edwin Dove, “Monte Carlo Simulations of the Formation Flying Dynamics for the Magnetospheric Multiscale (MMS) Mission,” Proceedings of the 22nd International Symposium on Space Flight Dynamics (ISSFD), Feb. 28 - March 4, 2011, Sao Jose dos Campos, SP, Brazil, URL: http://www.issfd22.inpe.br/S2-Formation.Flying-FF/S2_P1_ISSFD22_PF_073.pdf
22) Conrad Schiff, Fran Maher, Sean Henely, Dave Rand, “Magnetospheric MultiScale (MMS) System Manager,” Proceedings of GSAW 2014 (Ground System Architectures Workshop), Los Angeles, CA, USA, Feb. 24-27, 2014, URL: http://gsaw.org/wp-content/uploads/2014/03/2014s06schiff.pdf
24) William Bamford, Jason Mitchell, Michael Southward, Philip Baldwin, Luke Winternitz, Gregory Heckler, Rishi Kurichh, Steve Sirotzky, “GPS Navigation for the Magnetospheric Multi-Scale Mission,” Proceedings of the 22nd International Technical Meeting of The Satellite Division of the Institute of Navigation (ION GNSS 2009), Savannah, GA, USA, Sept. 22-25, 2009
25) Paige Thomas Scaperoth, Anne Long, Russell Carpenter, “Magnetospheric MultiScale Mission (MMS) Phase 2B Navigation Performance,” AAS/AIAA Astrodynamics Specialist Conference, Pittsburgh, PA, USA, Aug. 9-13, 2009, paper: AAS 09-324, URL: http://www.ai-solutions.com/Portals/0/AI%20Docs/Technical%20Paper%20Library%20pdf/2009/6.pdf
26) Corwin Olson, Cinnamon Wrighty, Anne Long, Russell Carpenter, “Expected Navigation Flight Performance for the Magnetospheric MultiScale (MMS) Mission,” 22nd AAS/AIAA Space Flight Mechanics Meeting, Charleston, SC, USA, Jan. 29-Feb. 2, 2012, paper: AAS 12-199,URL: http://www.ai-solutions.com/Portals/0/AI%20Docs/Technical%20Paper%20Library%20pdf/2012/EXPECTED_NAVIGATION_FLIGHT_PERFORMANCE_FOR_THE_MAGNETOSPHERIC_MULTISCALE_MMS_MISSION.pdf
27) William Bamford, Jason Mitchell, Michael Southward, Philip Baldwin, Luke Winternitz, Gregory Heckler, Rishi Kurichh, Steve Sirotzky, “GPS Navigation for the Magnetospheric Multi-Scale Mission,” 2009, URL: http://www.emergentspace.com/assets/1/7/GPS_ON_MMS_ION_2009.pdf
28) Lori Keesey, “The Fearsome Foursome: Technologies Enable Ambitious MMS Mission,” April 28, 2015, URL: http://www.nasa.gov/feature/the-fearsome-foursome-technologies-enable-ambitious-mms-mission
29) Anne Long, Mitra Farahmand, Russell Carpenter, ”Navigation Operations for the Magnetospheric Multiscale Mission,” Proceedings of the 25th International Symposium on Space Flight Dynamics, Munich, Germany, Oct. 19-23, 2015, URL: http://issfd.org/2015/files/downloads/papers/015_Long.pdf
30) Mitra Farahmand, Anne Long, Russell Carpenter, ”Magnetospheric MultiScale Mission Navigation Performance Using the Goddard Enhanced Onboard Navigation System,” Proceedings of the 25th International Symposium on Space Flight Dynamics, Munich, Germany, Oct. 19-23, 2015, URL: http://issfd.org/2015/files/downloads/papers/024_Farahmand.pdf
31) Dean J. Chai, Steven Z. Queen, Samuel J. Placanica, ”Precision Closed-Loop Orbital Maneuvering System Design And Performance For The Magnetospheric Multiscale Formation,” Proceedings of the 25th International Symposium on Space Flight Dynamics, Munich, Germany, Oct. 19-23, 2015, URL: http://issfd.org/2015/files/downloads/papers/181_Chai.pdf
32) Mara Johnson-Groh, ”Scientists with NASA’s MMS Mission Crack 60-Year Mystery of Fast Magnetic Explosions,” NASA Feature, 28 April 2022, URL: https://www.nasa.gov/feature/goddard/2022/sun/scientists-nasa-mms-mission-crack-60-year-mystery-fast-magnetic-explosions
33) Yi-Hsin Liu, Paul Cassak, Xiaocan Li, Michael Hesse, Shan-Chang Lin & Kevin Genestreti, ”First-principles theory of the rate of magnetic reconnection in magnetospheric and solar plasmas,” Nature Communications Physics, Vol. 5, Article No 97, Published: 28 April 2022, https://doi.org/10.1038/s42005-022-00854-x, URL: https://www.nature.com/articles/s42005-022-00854-x.pdf
34) ”SwRI-led team addresses mystery of heavy elements in galactic cosmic rays,” SwRI, 6 July 2021, URL: https://www.swri.org/press-release/swri-led-team-addresses-heavy-elements-galactic-cosmic-rays
35) Hadi Madanian, Steven J. Schwartz, Stephen A. Fuselier, David Burgess, Drew L. Turner, Li-Jen Chen, Mihir I. Desai, and Michael J. Starkey,”Direct Evidence for Magnetic Reflection of Heavy Ions from High Mach Number Collisionless Shocks,” The Astrophysical Journal Letters, Volume 915, Number 1, Published: 2 July 2021, https://doi.org/10.3847/2041-8213/ac0aee
36) Mara Johnson-Groh, ”NASA’s MMS Marks its 5th Year Breaking Records in Space,” NASA Feature, 12 March 2020, URL: https://www.nasa.gov/feature/goddard/2020/mms-marks-its-5th-year-breaking-records-in-space
37) Mara Johnson-Groh, Rob Garner, ”NASA’s MMS Finds First Interplanetary Shock,” NASA Feature, 9 August 2019, URL: https://www.nasa.gov/feature/goddard/2019/nasa-s-mms-finds-first-interplanetary-shock
38) Ian J. Cohen, Steven J. Schwartz, Katherine A. Goodrich, Narges Ahmadi, Robert E. Ergun, Stephen A. Fuselier, Mihir I. Desai, Eric R. Christian, David J. McComas, Gary P. Zank, Jason R. Shuster, Sarah K. Vines, Barry H. Mauk, Robert B. Decker, Brian J. Anderson, Joseph H. Westlake, Olivier Le Contel, Hugo Breuillard, Barbara L. Giles, Roy B. Torbert, James L. Burch, ”High‐Resolution Measurements of the Cross‐Shock Potential, Ion Reflection, and Electron Heating at an Interplanetary Shock by MMS,” Journal of Geophysical Research, Volume124, Issue6, 18 June 2019, Pages 3961-3978, https://doi.org/10.1029/2018JA026197,
39) Danny Baird, Rob Garner, ”Record-Breaking Satellite Advances NASA’s Exploration of High-Altitude GPS,” NASA, 4 April 2019, URL: https://www.nasa.gov/feature/goddard/2019/record-breaking-satellite-advances-nasa-s-exploration-of-high-altitude-gps
40) Mara Johnson-Groh, Rob Garner,”Discovering Bonus Science With NASA’s Magnetospheric Multiscale Spacecraft,” NASA, 7 March 2019, URL: https://www.nasa.gov/feature/goddard/2019/discovering-bonus-science-with-nasa-s-magnetospheric-multiscale-spacecraft
41) ”Spacecraft measurements reveal mechanism of solar wind heating,” Space Daily, 15 February 2019, URL: http://www.spacedaily.com/reports/Spacecraft_measurements_reveal_mechanism_of_solar_wind_heating_999.html
42) C. H. K. Chen, K. G. Klein & G. G. Howes, ”Evidence for electron Landau damping in space plasma turbulence,” Nature Communications, Volume 10, Article number: 740Published 14 February 2019, https://doi.org/10.1038/s41467-019-08435-3, URL: https://www.nature.com/articles/s41467-019-08435-3.pdf
43) ”SwRI scientists map magnetic reconnection in Earth’s magnetotail,” SwRI, 15 November 2018, URL: https://www.swri.org/press-release/swri-map-magnetic-reconnection-earth-magnetotail
44) R. B. Torbert, J. L. Burch, T. D. Phan, M. Hesse, M. R. Argall, J. Shuster, R. E. Ergun, L. Alm, R. Nakamura, K. J. Genestreti, D. J. Gershman, W. R. Paterson, D. L. Turner, I. Cohen, B. L. Giles, C. J. Pollock, S. Wang, L.-J. Chen, J. E. Stawarz, J. P. Eastwood, K. J. Hwang, C. Farrugia, I. Dors, H. Vaith, C. Mouikis, A. Ardakani, B. H. Mauk, S. A. Fuselier, C. T. Russell, R. J. Strangeway, T. E. Moore, J. F. Drake, M. A. Shay, Yuri V. Khotyaintsev, P.-A. Lindqvist, W. Baumjohann, F. D. Wilder, N. Ahmadi, J. C. Dorelli, L. A. Avanov, M. Oka, D. N. Baker, J. F. Fennell, J. B. Blake, A. N. Jaynes, O. Le Contel, S. M. Petrinec, B. Lavraud, Y. Saito, ”Electron-scale dynamics of the diffusion region during symmetric magnetic reconnection in space,” Science 15 Nov 2018: eaat2998, DOI: 10.1126/science.aat2998
45) ”Solving a Plasma Physics Mystery: Magnetic Reconnection,” US Department of Energy, 03 October 2018, URL: https://science.energy.gov/news/featured-articles/2018/10-03-18/
46) ”NASA Spacecraft Discovers New Magnetic Process in Turbulent Space,” NASA 9 May 2018, URL: https://www.nasa.gov/feature/goddard/2018/nasa-spacecraft-discovers-new-magnetic-process-in-turbulent-space
47) T. D. Phan, M. Øieroset, M. Oka, J. P. Eastwood, M. A. Shay, P. S. Pyakurel, C. C. Haggerty, J. F. Drake, B. U. Ö. Sonnerup, M. Fujimoto, Y. Saito, P. A. Cassak, J. L. Burch, R. B. Torbert, M. R. Argall, A. C. Rager, J. C. Dorelli, D. J. Gershman, B. L. Giles, T. E. Moore, C. Pollock, Y. Khotyaintsev, B. Lavraud, R. E. Ergun, F. D. Wilder, A. Retino, O. Le Contel, R. J. Strangeway, C. T. Russell, P. A. Lindqvist, W. Magnes, ”Electron magnetic reconnection without ion coupling in Earth’s turbulent magnetosheath,” Nature, Vol. 557, pp: 202–206, Published: 09 May 2018, doi:10.1038/s41586-018-0091-5, URL of abstract: https://www.nature.com/articles/s41586-018-0091-5
48) Mara Johnson-Groh, ”NASA’s Magnetospheric Multiscale Mission Locates Elusive Electron Act,” NASA, 3 Jan. 2018, URL: https://www.nasa.gov/feature/goddard/2018/nasa-s-magnetospheric-multiscale-mission-locates-elusive-electron-act
49) M. R. Argall, K. Paulson, L. Alm, A. Rager, J. Dorelli, J. Shuster, S. Wang, R. B. Torbert, H. Vaith, I. Dors, : M. Chutter, C. Farrugia, J. Burch, C. Pollock, B. Giles, D. Gershman, B. Lavraud, C. T. Russell, R. Strangeway, W. Magnes, P.-A. Lindqvist, Yu. V. Khotyaintsev, R. E. Ergun, N. Ahmadi, ”Electron dynamics within the electron diffusion region of asymmetric reconnection,” Journal of Geophysical Research: Space Physics, Vol.122, doi:10.1002/2017JA024524, 20 Dec. 2017
50) L.-J. Chen, M. Hesse, S. Wang, D. Gershman, R. E. Ergun, J. Burch, N. Bessho, R. B. Torbert, B. Giles, J. Webster, C. Pollock, J. Dorelli, T. Moore, W. Paterson, B. Lavraud, R. Strangeway, C. Russell, Y. Khotyaintsec, P.-A. Lindqvist, L. Avanov, ”Electron diffusion region during magnetopause reconnection with an intermediate guide field: Magnetospheric multiscale observations,” Journal of Geophysical Research: Space Physics, First published: 17 May 2017,
51) Mara Johnson-Groh, ”NASA Mission Uncovers Dance of Electrons in Space,” NASA, May 18, 2017, URL: https://www.nasa.gov/feature/goddard/2017/nasa-mission-uncovers-dance-of-electrons-in-space
52) Mara Johnson-Groh, ”NASA Observations Reshape Basic Plasma Wave Physics,” NASA, March 31, 2017, URL: https://www.nasa.gov/feature/goddard/2017/nasa-observations-reshape-basic-plasma-wave-physics
53) Daniel J. Gershman, Adolfo F-Viñas, John C. Dorelli, Scott A. Boardsen, Levon A. Avanov, Paul M. Bellan, Steven J. Schwartz, Benoit Lavraud, Victoria N. Coffey, Michael O. Chandler, Yoshifumi Saito, William R. Paterson, Stephen A. Fuselier, Robert E. Ergun, Robert J. Strangeway, Christopher T. Russell, Barbara L. Giles, Craig J. Pollock, Roy B. Torbert, James L. Burch, ”Wave-particle energy exchange directly observed in a kinetic Alfvén-branch wave,” Nature Communications, Vol. 8, ArticleNo: 14719 (2017), doi:10.1038/ncomms14719, published online 31 March 2017, URL: http://www.nature.com/articles/ncomms14719
54) Mara Johnson-Groh, ”NASA Spacecraft Prepares to Fly to New Heights,” NASA/GSFC, Feb. 9, 2017, URL: https://www.nasa.gov/feature/goddard/2017/nasa-spacecraft-prepares-to-fly-to-new-heights
55) Mara Johnson-Groh, ”NASA’s MMS Breaks Guinness World Record,” NASA, Nov. 4, 2016, URL: https://www.nasa.gov/feature/goddard/2016/nasa-s-mms-breaks-guinness-world-record
56) ”NASA’s Magnetospheric Multiscale (MMS) mission puts magnetic reconnection under the microscope,” SwRI, May 12, 2016, URL: http://www.swri.org/9what/releases/2016/mms-magnetic-reconnection.htm#.Vzk8weSFA_c
57) J. L. Burch1, R. B. Torbert, T. D. Phan, L.-J. Chen, T. E. Moore, R. E. Ergun, J. P. Eastwood, D. J. Gershman, P. A. Cassak, M. R. Argall, S. Wang4, M. Hesse, C. J. Pollock, B. L. Giles, R. Nakamura, B. H. Mauk, S. A. Fuselier, C. T. Russell, R. J. Strangeway, J. F. Drake, M. A. Shay, Yu. V. Khotyaintsev, P.-A. Lindqvist, G. Marklund, F. D. Wilder, D. T. Young, K. Torkar, J. Goldstein, J. C. Dorelli, L. A. Avanov, M. Oka, D. N. Baker, A. N. Jaynes, K. A. Goodrich, I. J. Cohen, D. L. Turner, J. F. Fennell, J. B. Blake, J. Clemmons, M. Goldman, D. Newman, S. M. Petrinec, K. J. Trattner, B. Lavraud, P. H. Reiff, W. Baumjohann, W. Magnes, M. Steller, W. Lewis, Y. Saito, V. Coffey, M. Chandler, ”Electron-scale measurements of magnetic reconnection in space,” Science, 12 May 2016, DOI: 10.1126/science.aaf2939 , URL of abstract: http://science.sciencemag.org/content/early/2016/05/10/science.aaf2939
58) ”Plasma physics' giant leap,” Space Daily, May 19, 2016, URL: http://www.spacedaily.com/reports/Plasma_physics_giant_leap_999.html
59) Karen Fox, ”NASA's MMS Celebrates a Year in Space,” NASA, March 14, 2016, URL: http://www.nasa.gov/feature/goddard/2016/nasas-mms-celebrates-a-year-in-space
60) Sarah Frazier, ”NASA’s MMS Delivers Promising Initial Results,” NASA, Dec. 18, 2015, URL: https://www.nasa.gov/feature/goddard/nasa-s-mms-delivers-promising-initial-results
61) ”NASA Spacecraft takes GPS to New Heights,” NASA Science News, Sept. 18, 2015, URL: http://science.nasa.gov/science-news/science-at-nasa/2015/16sep_gps/
62) ”MMS Officially Begins Science Phase,” NASA, Sept. 4, 2015, URL: http://www.nasa.gov/content/goddard/mms-post-launch-mission-highlights/index.html
63) ”MMS Spacecraft in Tetrahedral Flying Formation,” NASA, July 29, 2015, URL: http://www.nasa.gov/image-feature/goddard/mms/mms-spacecraft-in-tetrahedral-flying-formation
65) Karen C. Fox, “NASA Goddard Team Sets High Flying Record with Use of GPS,” NASA/GSFC, April 27, 2015, URL: http://www.nasa.gov/feature/nasa-goddard-team-sets-high-flying-record-with-use-of-gps
66) Lori Keesey, “The Fearsome Foursome: Technologies Enable Ambitious MMS Mission,” NASA, April 28, 2015, URL: http://www.nasa.gov/feature/the-fearsome-foursome-technologies-enable-ambitious-mms-mission
68) “MMS Payload Status,” LASP, April 21, 2015, URL: https://lasp.colorado.edu/galaxy/display/mms/MMS+Payload+Status
73) “Magnetospheric Multiscale (MMS) Project Data Management Plan,” SwRI, Document No: 10160.18-PDMP-01, August 2010
75) Ronald K. Black, Thomas C. Trbovich, Joerg Gerhardus, “Instrument Suite Development for the Magnetospheric Multiscale Mission,” Supply Chain Quality Assurance Conference, October 18 – 20, 2011, URL: http://supplychain.gsfc.nasa.gov/docs/sc2011trobovichgerhardusblack.pdf
81) “MMS Instruments Interactive,” NASA, URL: http://www.nasa.gov/mission_pages/mms/spacecraft/instruments.html#.VURu25M_P-Y
83) “About NASA's Magnetospheric Multiscale Mission,” UNH, 2012, URL: http://mms-fields.unh.edu/ppts/mms%20fields%20epo%20slideshow_2012-05-03a.ppt
84) H. Eichelberger, G. Prattes, G. Fremuth, F. Giner, H. Jeszenszky, Ch. Kürbisch, M. Leichtfried, K. Torkar, “EMC Measurement from the instrument ASPOC aboard Magnetospheric Multiscale (MMS) mission,” Proceedings of 2012 ESA Workshop on Aerospace EMC, Venice, Italy, May 21-23, 2012, SP-702
86) Juan C. Raymond, Joseph E. Sedlak, Babak Vint, ”Attitude Ground System for the Magnetospheric Multi-Scale Mission,” Proceedings of the 25th International Symposium on Space Flight Dynamics, Munich, Germany, Oct. 19-23, 2015, URL: http://issfd.org/2015/files/downloads/papers/182_Raymond.pdf
The information compiled and edited in this article was provided by Herbert J. Kramer from his documentation of: ”Observation of the Earth and Its Environment: Survey of Missions and Sensors” (Springer Verlag) as well as many other sources after the publication of the 4th edition in 2002. - Comments and corrections to this article are always welcome for further updates (firstname.lastname@example.org).Spacecraft Launch Mission Status Sensor Complement Ground Segment References Back to top