SDO (Solar Dynamics Observatory)
Non-EO
NASA
Space Weather
Quick facts
Overview
Mission type | Non-EO |
Agency | NASA |
Launch date | 11 Feb 2010 |
SDO (Solar Dynamics Observatory)Spacecraft Launch Mission Status Sensor Complement Ground Segment References
SDO is a NASA satellite, considered to be a second-generation solar mission (also referred to as SOHO successor). SDO represents the first mission within NASA's LWS (Living With a Star) program, a space weather-focused and applications-driven research program. The goal of LWS is to understand the sun as a magnetic variable star and to measure its impact on life and society on Earth.
The overall SDO objective is to observe the dynamics of the solar interior, provide data on the sun's magnetic field structure, characterize the release of mass and energy from the sun into the heliosphere, and monitor variations in solar irradiance. The goal is to understand the dynamic state of the sun (its variability) on multiple temporal and spatial scales which influence life and technology on Earth - to enable the development of an operational capability for space weather prediction (the purpose of the LWS Program). 1) 2) 3) 4) 5) 6)
The SDO mission was assigned a number of mission objectives specifically designed to support the LWS goals of understanding the drivers of solar activity and variability that affect Earth and humanity. Specifically, SDO was designed to address seven science questions dealing with the sun's dynamic activity and its effect on the Earth: 7)
1) What mechanisms drive the quasi-periodic 11-year cycle of solar activity?
2) How is active region magnetic flux synthesized, concentrated, and dispersed across the solar surface?
3) How does magnetic reconnection on small scales reorganize the large-scale field topology and current systems and how significant is it in heating the corona and accelerating the solar wind?
4) Where do the observed variations in the Sun‘s EUV spectral irradiance arise, and how do they relate to the magnetic activity cycles?
5) What magnetic field configurations lead to the coronal mass ejections (CMEs), filament eruptions, and flares that produce energetic particles and radiation?
6) Can the structure and dynamics of the solar wind near Earth be determined from the magnetic field configuration and atmospheric structure near the solar surface?
7) When will activity occur, and is it possible to make accurate and reliable forecasts of space weather and climate?
The observation requirements are:
• To provide nearly continuous coverage of solar activity
• To provide coverage of the regimes (interior, photosphere, corona) in which the activity occurs
• To provide sufficient data on the types of phenomena which impact Earth, near-Earth space and humanity
• To observe the solar variability over the relevant timescales (seconds to years).
Spacecraft
The spacecraft is being designed and built at NASA/GSFC. The SDO design consists of a bus module and an instrument module (Figure 5); the instrument module employs a graphite composite structure to minimize thermal distortions The spacecraft bus module contains the S/C and instrument electronics. Redundant HGAs (High Gain Antennas) are mounted at the end of rigid booms (must be rigid due to required waveguides).
The spacecraft is 3-axis stabilized. The ACS (Attitude Control System) is a single-fault tolerant design. Its fully redundant attitude sensor complement includes 16 coarse sun sensors, a digital sun sensor (DSS), 3 two-axis inertial reference units (IRU), 2 star trackers (ST), and 4 guide telescopes. Attitude actuation is performed using 4 reaction wheel assemblies (RWA) and 8 thrusters, and a single main engine nominally provides velocity-change thrust. - The attitude control software has five nominal control modes: 3 wheel-based modes and 2 thruster-based modes. A wheel-based safehold running in the attitude control electronics box improves the robustness of the system as a whole. All six modes are designed on the same basic proportional-integral-derivative attitude error structure, with more robust modes setting their integral gains to zero. 8)
The ST and DSS combine to provide two-out-of-three single-fault tolerance fine attitude determination. Any one of the 4 AIA guide telescopes may be selected as the ACS CGT (Controlling Guide Telescope). Control is actuated using reaction wheel assemblies (RWA) and attitude control thrusters. Orbit change maneuvers can be accomplished using either the thrusters or a main engine, i.e. the RCS (Reaction Control Subsystem); the main engine will be used nominally for all long maneuvers performed in achieving geosynchronous orbit from the launch orbit.
The ACS supports five operational modes. These are: sun acquisition, inertial, science, ΔH and ΔV. One mode, namely safehold, operates solely in the ACE (Attitude Control Electronics) software. The SDO remains sun-pointing throughout most of its mission for the instruments to take measurements of the sun.
Onboard Ephemeris: The SDO onboard ephemeris predicts the locations of the Sun, Moon, spacecraft, and ground station in geocentric inertial coordinates, referred to the mean-equator-and-equinox of J2000 (GCI, mean-of-J2000). Each object's velocity is derived from differencing successive position vectors and dividing the result by the ephemeris task sample time (nominally 1 second). The solar ephemeris accuracy is better than 2 arcseconds during the 10 year SDO mission lifetime and has been validated by the JPL DE405 ephemeris.
The following key spacecraft technologies are being introduced:
• Ethernet chipset
• Ka-band transmitter
• APS (Active Pixel Sensor) star tracker.
SDO uses a bi-propellant propulsion system, an AKM (Apogee Kick Motor), to boost the spacecraft from a GTO (Geosynchronous Transfer Orbit) into a GSO (Geosynchronous Orbit). The Spacecraft design life is 5 years (10 years for expendables). The launch mass of SDO is about 3,200 kg.
Spacecraft mass | Total mass of the spacecraft at launch is 3200 kg (payload 270 kg, fuel 1400 kg) |
Spacecraft dimensions | - The overall length along the sun-pointing axis is 4.5 m, and each side is 2.22 m |
Spacecraft power | Total available power is 1540 W from 6.5 m2 of solar arrays (efficiency of 16%) |
Spacecraft orientation | The high-gain antennas rotate once each orbit to follow the Earth |
Spacecraft design life | 5 years (10 years for expendables) |
Launch
The SDO spacecraft was launched on February 11, 2010 on an Atlas-V vehicle from KSC at Cape Canaveral, FLA. The launch provider was ILS (International Launch Services). 9) 10)
Orbit: Inclined geosynchronous circular orbit (IGSO), altitude ~ 35,756 km, inclination = 28.5º, the spacecraft is positioned at a longitude of 102º W. The GSO permits nearly continuous observations of the sun and high data rates to the ground. Only two short eclipse periods per year are being encountered where the Earth's shadow grows to a maximum of about 72 minutes per day. Note: the inclined orbit will form a lemniscate, also referred to as analemma, (i.e., a figure 8 ground track) over the Earth during each day extending to ±28.5º in latitude (inclination) at the longitudinal position.
RF communications: Science data are downlinked in Ka-band (26.5 GHz) from its redundant onboard high-gain antennas at a data rate of 150 Mbit/s (includes data compression). There are no onboard recorders for the science data since the spacecraft is in continuous contact with the ground station. The TT&C data are in S-band (2215 MHz) using two onboard omni-directional antennas. - The continuous stream of science data from the SDO spacecraft will produce ~ 2 TByte of raw data every day.
As of July 2020, the previously single large SDO file has been split into two files, to make the file handling manageable for all parties concerned, in particular for the user community.
• This article covers the SDO mission and its imagery in the period 2020+2021, in addition to some of the mission milestones.
• SDO mission status and imagery in the period 2019
• SDO mission status and imagery in the period 2018-2010
Mission Status
This is the Mission Status for the period of 2020 + 2021 + 2022.
• June 16, 2022: From afar, the Sun appears blank and featureless in visible light. But through a solar telescope in different wavelength, it is revealed to be much, much more. 11)
- In extreme ultraviolet light, the Sun resembles a rumpled ball of yarn. It teems with giant radiant arcs known as coronal loops soaring through the Sun's corona, or outer atmosphere. Coronal loops are considered fundamental to the Sun's workings. Understanding how they form, change, and move is one of the key goals to understanding our closest star.
- At least that's what researchers have long assumed. In a recent paper, solar physicist Anna Malanushenko and her co-authors argue that some coronal loops may not be what they appear to be. Instead, they may sometimes be optical illusions created by folds or wrinkles in much larger "sheets" of solar material that the authors call coronal veils.
- "If this is really correct, then we will have to change the entire way we look at and interpret coronal loops," said Malanushenko, a scientist at the National Center for Atmospheric Research in Boulder, Colorado, and lead author of the paper published in The Astrophysical Journal. 12)
- Ever since capturing the first images of coronal loops in the late 60's, scientists have hypothesized what their 3D structure might be. The conventional model saw them as magnetic "tubes" formed by the Sun's magnetic field lines. The tubes themselves are invisible; what we see is the bright solar material that flows through them like water through a garden hose. This "garden hose" model of coronal loops fit well with known physics and there was no reason to doubt it, at least at first. But eventually, observations that didn't fit began to pile up.
- Just as Earth's air gets thinner at higher altitudes, the Sun's bright plasma, or electrically charged gas, gets thinner with height. That's why it grows dimmer with height, and if coronal loops truly are tubes of plasma, so should they. But many loops maintain a consistent brightness, with no obvious explanation.
- If coronal loops trace the Sun's magnetic field lines, they should balloon as they move away from the Sun as that magnetic field expands to fill space. "But they don't get nearly as wide as we think they should," Malanushenko said. "Most of them stay too thin and we don't understand why."
- Something wasn't adding up, and Malanushenko started to question the observations themselves. After all, the Sun's corona is "optically thin," or translucent, like fog or smoke. She wanted to understand the optical tricks that could occur in that kind of environment.
- Malanushenko decided to simulate the process of observing coronal loops with a computer. She repurposed a 3D simulation of the Sun originally used to study flares, then wrote a program to "observe" it. She fired up the simulation, and her program took 2D "images" of it, just as telescopes give us 2D snapshots of the real Sun. Sure enough, the snapshots revealed bright arcs – artificial coronal loops on a simulated Sun.
- But unlike the real Sun, Malanushenko could pause the simulated Sun and look at its 3D structures behind them. And she found something markedly different from garden hose-like tubes.
- "I don't have words how to describe it, because this is not like anything that we see on Earth," said Malanushenko, "I want to say this formation looks like clouds of smoke, or maybe a veil or curtains that are wrinkled."
- Malanushenko created a simple model to illustrate how a veil could produce the illusion of coronal loops. The shadow created against the wall represents the 2D image we see in solar telescopes. The veil's folds and wrinkles create a pattern of darker and brighter strands, in some ways similar to the image cast by real tube-like strands.
- "But many of the strands that you see here, they're just a projection effect. They're not real," Malanushenko said.
- Malanushenko and her co-authors are quick to clarify that not all coronal loops are visual illusions. There were many instances where garden hose-like structures do really form, even in the simulation that Malanushenko studied.
- "It would be exciting if we could say ‘Our thinking was all wrong, we have a totally new paradigm,'" said Jim Klimchuk, a solar physicist at NASA's Goddard Space Flight Center and coauthor of the paper. "It's not that way at all – but these veils, I'm sure they do exist, and now it's a question of proportions: are veils more common or are loops more common?"
- One thing the co-authors agree on is that there's now plenty more work to do.
- "Now, do we have any idea why those veil structures are produced?" asked Malanushenko. "No! We literally just discovered them. Now we need to explain them, and we don't have a good explanation yet."
• May 10, 2022: The Sun emitted a strong solar flare on Tuesday, May 10, 2022, peaking at 9:55 a.m. EDT. NASA's Solar Dynamics Observatory, which watches the Sun constantly, captured an image of the event. 13)
- Solar flares are powerful bursts of energy. Flares and solar eruptions can impact radio communications, electric power grids, navigation signals, and pose risks to spacecraft and astronauts.
- This flare is classified as an X-class flare. X-class denotes the most intense flares, while the number provides more information about its strength.
- To see how such space weather may affect Earth, please visit NOAA's Space Weather Prediction Center https://spaceweather.gov/, the U.S. government's official source for space weather forecasts, watches, warnings, and alerts. NASA works as a research arm of the nation's space weather effort. NASA observes the Sun and our space environment constantly with a fleet of spacecraft that study everything from the Sun's activity to the solar atmosphere, and to the particles and magnetic fields in the space surrounding Earth.
• April 20, 2022: The Sun emitted two solar flares on 19 April 2022, one moderate peaking at 9:35 p.m. EST and one strong peaking at 11:57 p.m. EST. NASA's Solar Dynamics Observatory, which watches the Sun constantly, captured an image of both events. 14)
- Solar flares are powerful bursts of energy. Flares and solar eruptions can impact radio communications, electric power grids, navigation signals, and pose risks to spacecraft and astronauts.
- The flare in Figure 13 is classified as an M-Class flare. M-class flares are a class below the most intense flares, the X-class flares. The number provides more information about its strength. More info on how flares are classified can be found here.
- The flare in Figure 14 is classified as an X-Class flare. X-class denotes the most intense flares.
- To see how such space weather may affect Earth, please visit NOAA's Space Weather Prediction Center https://spaceweather.gov/, the U.S. government's official source for space weather forecasts, watches, warnings, and alerts. NASA works as a research arm of the nation's space weather effort. NASA observes the Sun and our space environment constantly with a fleet of spacecraft that study everything from the Sun's activity to the solar atmosphere, and to the particles and magnetic fields in the space surrounding Earth.
• March 31, 2022: The Sun emitted a mid-level solar flare on March 31, 2022, peaking at 2:35 p.m. EST. NASA's Solar Dynamics Observatory, which watches the Sun constantly, captured an image of the event. 15)
- Solar flares are powerful bursts of energy. Flares and solar eruptions can impact radio communications, electric power grids, navigation signals, and pose risks to spacecraft and astronauts.
- This flare is classified as an M-Class flare. M-class flares are a tenth the size of the most intense flares, the X-class flares. The number provides more information about its strength. An M2 is twice as intense as an M1, an M3 is three times as intense, etc. More info on how flares are classified can be found here.
- To see how such space weather may affect Earth, please visit NOAA's Space Weather Prediction Center https://spaceweather.gov/, the U.S. government's official source for space weather forecasts, watches, warnings, and alerts. NASA works as a research arm of the nation's space weather effort. NASA observes the Sun and our space environment constantly with a fleet of spacecraft that study everything from the Sun's activity to the solar atmosphere, and to the particles and magnetic fields in the space surrounding Earth.
• October 28, 2021: The Sun emitted a significant solar flare peaking at 11:35 a.m. EDT on Oct. 28, 2021. NASA's Solar Dynamics Observatory, which watches the Sun constantly, captured an image of the event. 16)
- Solar flares are powerful bursts of radiation. Harmful radiation from a flare cannot pass through Earth's atmosphere to physically affect humans on the ground, however — when intense enough — they can disturb the atmosphere in the layer where GPS and communications signals travel.
- This flare is classified as an X1-class flare.
- X-class denotes the most intense flares, while the number provides more information about its strength. An X2 is twice as intense as an X1, an X3 is three times as intense, etc. Flares that are classified X10 or stronger are considered unusually intense.
- To see how such space weather may affect Earth, please visit NOAA's Space Weather Prediction Center, the U.S. government's official source for space weather forecasts, watches, warnings, and alerts. NASA works as the research arm of the nation's space weather effort. NASA observes the Sun and our space environment constantly with a fleet of spacecraft that study everything from the Sun's activity to the solar atmosphere, and to the particles and magnetic fields in the space surrounding Earth.
• July 23, 2021: A group of researchers is using artificial intelligence techniques to calibrate some of NASA's images of the Sun, helping improve the data that scientists use for solar research. The new technique was published in the journal Astronomy & Astrophysics on April 13, 2021. 17) 18)
- A solar telescope has a tough job. Staring at the Sun takes a harsh toll, with a constant bombardment by a never-ending stream of solar particles and intense sunlight. Over time, the sensitive lenses and sensors of solar telescopes begin to degrade. To ensure the data such instruments send back is still accurate, scientists recalibrate periodically to make sure they understand just how the instrument is changing.
- Launched in 2010, NASA's SDO (Solar Dynamics Observatory) has provided high-definition images of the Sun for over a decade. Its images have given scientists a detailed look at various solar phenomena that can spark space weather and affect our astronauts and technology on Earth and in space. The AIA (Atmospheric Imagery Assembly) is one of two imaging instruments on SDO and looks constantly at the Sun, taking images across 10 wavelengths of ultraviolet light every 12 seconds. This creates a wealth of information of the Sun like no other, but – like all Sun-staring instruments – AIA degrades over time, and the data needs to be frequently calibrated.
- Since SDO's launch, scientists have used sounding rockets to calibrate AIA. Sounding rockets are smaller rockets that typically only carry a few instruments and take short flights into space – usually only 15 minutes. Crucially, sounding rockets fly above most of Earth's atmosphere, allowing instruments on board to see the ultraviolet wavelengths measured by AIA. These wavelengths of light are absorbed by Earth's atmosphere and can't be measured from the ground. To calibrate AIA, they would attach an ultraviolet telescope to a sounding rocket and compare that data to the measurements from AIA. Scientists can then make adjustments to account for any changes in AIA's data.
- There are some drawbacks to the sounding rocket method of calibration. Sounding rockets can only launch so often, but AIA is constantly looking at the Sun. That means there's downtime where the calibration is slightly off in between each sounding rocket calibration.
- "It's also important for deep space missions, which won't have the option of sounding rocket calibration," said Dr. Luiz Dos Santos, a solar physicist at NASA's Goddard Space Flight Center in Greenbelt, Maryland, and lead author on the paper. "We're tackling two problems at once."
Virtual Calibration
- With these challenges in mind, scientists decided to look at other options to calibrate the instrument, with an eye towards constant calibration. Machine learning, a technique used in artificial intelligence, seemed like a perfect fit.
- As the name implies, machine learning requires a computer program, or algorithm, to learn how to perform its task.
- First, researchers needed to train a machine learning algorithm to recognize solar structures and how to compare them using AIA data. To do this, they give the algorithm images from sounding rocket calibration flights and tell it the correct amount of calibration they need. After enough of these examples, they give the algorithm similar images and see if it would identify the correct calibration needed. With enough data, the algorithm learns to identify how much calibration is needed for each image.
- Because AIA looks at the Sun in multiple wavelengths of light, researchers can also use the algorithm to compare specific structures across the wavelengths and strengthen its assessments.
- To start, they would teach the algorithm what a solar flare looked like by showing it solar flares across all of AIA's wavelengths until it recognized solar flares in all different types of light. Once the program can recognize a solar flare without any degradation, the algorithm can then determine how much degradation is affecting AIA's current images and how much calibration is needed for each.
- "This was the big thing," Dos Santos said. "Instead of just identifying it on the same wavelength, we're identifying structures across the wavelengths."
- This means researchers can be more sure of the calibration the algorithm identified. Indeed, when comparing their virtual calibration data to the sounding rocket calibration data, the machine learning program was spot on.
- With this new process, researchers are poised to constantly calibrate AIA's images between calibration rocket flights, improving the accuracy of SDO's data for researchers.
Machine Learning Beyond the Sun
- Researchers have also been using machine learning to better understand conditions closer to home.
- One group of researchers led by Dr. Ryan McGranaghan - Principal Data Scientist and Aerospace Engineer at ASTRA LLC and NASA Goddard Space Flight Center - used machine learning to better understand the connection between Earth's magnetic field and the ionosphere, the electrically charged part of Earth's upper atmosphere. By using data science techniques to large volumes of data, they could apply machine learning techniques to develop a newer model that helped them better understand how energized particles from space rain down into Earth's atmosphere, where they drive space weather.
- As machine learning advances, its scientific applications will expand to more and more missions. For the future, this may mean that deep space missions – which travel to places where calibration rocket flights aren't possible – can still be calibrated and continue giving accurate data, even when getting out to greater and greater distances from Earth or any stars.
• July 20, 2021: On July 20 2012, humanity escaped technological and economic disaster. A diffuse cloud of magnetized plasma in the shape of a slinky toy tens of thousands of kilometers across was hurled from the Sun at a speed of hundreds of kilometers per second. 19)
- This coronal mass ejection (CME) just missed the Earth because its origin on the Sun was facing away from our planet at the time. Had it hit the Earth, satellites might have been disabled, power grids around the globe knocked out, GPS systems, self-driving cars, and electronics jammed, and railway tracks and pipelines damaged. The cost of the potential damage has been estimated at between $600 bn and $2.6 trn in the US alone.
- While CMEs as large as the 2012 event are rare, lesser ones cause damage on Earth about once every three years. CMEs need between one and a few days to reach Earth, leaving us some time to prepare for the potential geomagnetic storm. Current efforts to limit any damage include steering satellites out of harm's way or redirecting the power load of electrical grids. But many CMEs — called 'stealth CMEs' because they don't produce any clear signs close to the Sun's surface — aren't detected until they reach Earth.
- Now, an International Space Science Institute (ISSI) team of scientists from the US, Belgium, UK, and India shows how to detect potentially damaging stealth CMEs, trace them back to their region of origin on the Sun, extrapolate their trajectory, and predict if they will hit Earth. The results were recently published in the journal Frontiers in Astronomy and Space Sciences. 20)
Visualizing the Invisible
- "Stealth CMEs have always posed a problem, because they often originate at higher altitudes in the Sun's corona, in regions with weaker magnetic fields. This means that unlike normal CMEs — which typically show up clearly on the Sun as dimmings or brightenings — stealth CMEs are usually only visible on devices called coronagraphs designed to reveal the corona," said corresponding author Dr Erika Palmerio, a researcher at the Space Sciences Laboratory of the University of California at Berkeley.
- "If you see a CME on a coronagraph, you don't know where on the Sun it came from, so you can't predict its trajectory and won't know whether it will hit Earth until too late."
- Palmerio continued: "But here we show that many stealth CMEs can in fact be detected in time if current analysis methods for remote sensing are adapted. Put simply, we compared 'plain' remote sensing images of the Sun with the same image taken between eight and 12 hours earlier, to capture very slow changes in the lower corona, up to 350,000km from the Sun's surface. In many cases, these 'difference images' revealed small, previously overlooked changes in the loops of magnetic fields and plasma that are hurled from the Sun. We then zoom in on these with another set of imaging techniques to further analyze the stealth CME's approximate origin, and predict whether it is headed towards Earth."
Stealth CMEs Leave Overlooked Signs
- Palmerio and collaborators looked at four stealth CMEs that occurred between 2008 and 2016. Unusually for stealth CMEs, their origin on the Sun was approximately known only because NASA's twin STEREO spacecraft, launched in 2006, had happened to capture them 'off-limb'. This means it was viewed outside the Sun's disc from another angle than from Earth.
- With the new imaging techniques, the authors revealed previously undetected, tiny dimmings and brightenings on the Sun at the region of origin of all four stealth CMEs. They conclude that the technique can be used for the early detection of risky stealth CMEs.
- "This result is important because it shows us what to look for if we wish to predict the impact on Earth from solar eruptions," said Palmerio.
- "Another important aspect of our study — using geometric techniques to locate a CME's approximate source region and model its 3D structure as it expands and moves towards Earth — can only be implemented when we have more dedicated observatories with different perspectives, like the STEREO spacecraft."
- The authors predict that the new European Space Agency's Solar Orbiter, launched in February 2020, will help with this, just like similar initiatives which are currently discussed by researchers worldwide.
- "Data from more observatories, analyzed with the techniques developed in our study, could also help with an even more difficult challenge: namely to detect so-called 'super stealth CMEs', which don't even show up on coronagraphs," said coauthor Dr Nariaki V Nitta, a senior researcher at Lockheed Martin Solar and Astrophysics Laboratory in Palo Alto, CA, USA.
• June 7, 2021: In a dramatic, multi-staged eruption, the Sun has revealed new clues that could help scientists solve the long-standing mystery of what causes the Sun's powerful and unpredictable eruptions. Uncovering this fundamental physics could help scientists better predict the eruptions that cause dangerous space weather conditions at Earth. 21)
- This explosion contained components of three different types of solar eruptions that usually occur separately – making it the first time such an event has been reported. Having all three eruption types together in one event provides scientists with something of a solar Rosetta Stone, allowing them to translate what they know about each type of solar eruption to understand other types and uncover an underlying mechanism that could explain all types of solar eruptions.
- "This event is a missing link, where we can see all of these aspects of different types of eruptions in one neat little package," said Emily Mason, lead author on the new study and solar scientist at NASA's Goddard Space Flight Center in Greenbelt, Maryland. "It drives home the point that these eruptions are caused by the same mechanism, just at different scales."
- Eruptions on the Sun usually come in one of three forms: a coronal mass ejection, a jet, or a partial eruption. Coronal mass ejections – CMEs – and jets are both explosive eruptions that cast energy and particles into space, but they look very different. While jets erupt as narrow columns of solar material, CMEs form huge bubbles that expand out, pushed and sculpted by the Sun's magnetic fields. Partial eruptions, on the other hand, start erupting from the surface but don't conjure enough energy to leave the Sun, so most of the material falls back down onto the solar surface.
- In this eruption – observed with NASA's Solar Dynamics Observatory and the European Space Agency and NASA's Solar and Heliospheric Observatory on March 12 and 13, 2016 – the scientists saw the ejection of a hot layer of solar material above a magnetically active region on the Sun's surface. The ejection was too big to be a jet, but too narrow to be a CME. Within a half an hour, a second cooler layer of material on the surface also started to erupt from the same place, but ultimately it fell back down as a partial eruption. Seeing an eruption with both jet and CME characteristics tells scientists they're likely caused by a singular mechanism.
- With this new understanding, scientists can apply what they know about jets to CMEs. The event also tells scientists that partial eruptions occur on the same spectrum but encounter some yet-unknown limiter that restricts their energy and doesn't allow them to make it off the Sun.
- Understanding the mechanism behind these events, especially CMEs, is of critical importance to predicting when a large eruption might cause disruptions at Earth. CMEs in particular release large clouds of high-energy charged particles and magnetic fields that stream out across the solar system and can result in the space weather – a storm of high-energy particles and activity that can be dangerous to astronauts and technology in space and, in extreme cases, utility grids on Earth.
- By modeling the new Rosetta eruption and others since discovered like it, the scientists hope they can figure out what root mechanism causes solar eruptions and determines their characteristics. Finding a trigger could ultimately allow scientists to predict when a large eruption could threaten Earth and Mars several hours in advance – providing enough time for astronauts and spacecraft operators to take precautionary measures.
• March 10, 2021: Zipping through space at close to the speed of light, Solar Energetic Particles, or SEPs, are one of the main challenges for the future of human spaceflight. Clouds of these tiny solar projectiles can make it to Earth – a 93 million mile journey – in under an hour. They can fry sensitive spacecraft electronics and pose serious risks to human astronauts. But their onset is extraordinarily hard to predict, in part because we still don't know exactly where on the Sun they come from. 22)
- A new study tracing three SEP bursts back to the Sun has provided the first answer.
- "We have for the first time been able to pinpoint the specific sources of these energetic particles," said Stephanie Yardley, space physicist at the University College London and coauthor of the paper. "Understanding the source regions and physical processes that produce SEPs could lead to improved forecasting of these events." Study authors David Brooks, space physicist at George Mason University in Washington, D.C., and Yardley published their findings in Science Advances on March 3, 2021. 23)
- SEPs can shoot out from the Sun in any direction; catching one in the vastness of space is no small feat. NASA's Heliophysics System Observatory – a growing fleet of Sun-studying spacecraft, strategically placed throughout the solar system – was designed in part to increase the chances of those lucky encounters.
- Scientists have divided SEP events into two major types: impulsive and gradual. Impulsive SEP events usually happen after solar flares, the bright flashes on the Sun produced by abrupt magnetic eruptions.
- "There's this really sharp spike, and then an exponential decay with time," said Lynn Wilson, project scientist for the Wind spacecraft at NASA's Goddard Space Flight Center in Greenbelt, Maryland.
- Gradual SEPs last longer, sometimes for days. They come in large swarms, making the blasts a bigger risk to astronauts and satellites. Gradual SEPs are pushed along from behind by CMEs (Coronal Mass Ejections) large plumes of solar material that billow through space like a tidal wave. The SEPs act like surfers, caught by that wave and propelled to incredible speeds.
- The greatest mystery about gradual SEPs is not what speeds them up, but where they come from in the first place. For reasons still not fully understood, SEPs contain a different mix of particles than the other solar material streaming off the Sun in the solar wind – fewer carbon, sulfur, and phosphorous ions, for instance. Some scientists suspect they're cut from an entirely different cloth, forming in a different feature or layer of the Sun than the rest of the solar wind.
- To find out where SEPs come from, Brooks and Yardley traced gradual SEP events from January 2014 back to their origin on the Sun.
- They started with NASA's Wind spacecraft, which orbits at the L1 Lagrange point about 1 million miles closer to the Sun than we are. One of Wind's eight instruments is the EPACT (Energetic Particles: Acceleration, Composition, and Transport) instrument, which specializes in detecting SEPs. EPACT captured three strong SEP blasts on January 4th, 6th and 8th.
- Wind's data showed that these SEP events indeed had a specific "fingerprint" – a different mix of particles than is typically found in the solar wind.
- "There is often less sulfur in SEPs compared to the solar wind, sometimes a lot less" said Brooks, lead author of the paper. "This is a unique fingerprint of SEPs that allows us to search for places in the Sun's atmosphere where sulfur is also lacking."
- They turned to JAXA/NASA's Sun-watching Hinode spacecraft, an observatory in which Brooks serves a critical operational role for NASA from Japan. Hinode was watching Active Region 11944, a bright area of strong magnetic field with a large dark sunspot visible from Earth. AR 11944 had produced several large flares and CMEs in early January that released and accelerated the SEPs Wind observed.
- Hinode's EIS (Extreme Ultraviolet Imaging Spectrometer) instrument scanned the active region, breaking the light into spectral lines used to identify specific elements. They looked for places in the active region with a matching fingerprint, where the specific mix of elements agreed with what they saw in Wind's data.
- "This type of research is exactly what Hinode was designed to pursue," said Sabrina Savage, the U.S. project scientist for Hinode. "Complex system science cannot be done in a bubble with only one mission."
- Hinode's data revealed the source of the SEP events – but it wasn't what either Brooks or Yardley expected.
- As a rule, the solar wind can escape more easily by finding open magnetic field lines – field lines anchored to the Sun at one end but streaming out into space on the other.
- "I really thought we were going to find it at the edges of the active region where the magnetic field is already open and material can escape directly," Brooks said. "But the fingerprint matched only in regions where the magnetic field is still closed."
- The SEPs had somehow broken free from strong magnetic loops connected to the Sun at both ends. These loops trap material near the top of the chromosphere, one layer below where solar flares and coronal mass ejections erupt.
- "People have already been thinking about ways it could get out from closed field – especially in the context of the solar wind," Brooks said. "But I think the fact that the material was found in the core of the region, where the magnetic fields are very strong, makes it harder for those processes to work."
- The surprising result raises new questions about how SEPs escape the Sun, questions ripe for future work. Still, pinpointing one event's source is a big step forward.
- "Normally, you have to infer this kind of thing – you'd say, ‘look we saw an SEP and a solar flare, and the SEP probably came from the solar flare,'" said Wilson, who wasn't involved in the study. "But this is direct evidence tying these two phenomena together."
- Brooks and Yardley also demonstrate one way to use NASA's growing Heliophysics System Observatory, combining multi-spacecraft observations to do science that previously wasn't possible.
- "It's a way of thinking about all the spacecraft that are in flight that you can use to do a single study," Wilson said. "It's like having a bunch of weather stations — you start to get a much better picture of what the weather is doing on a larger scale, and you can actively start to try to predict it."
- "These authors have done a remarkable job combining the right data sets and applying them to the right questions," Savage said. "The search for the origins of potentially harmful energetic particles has been critically narrowed thanks to this effort."
• January 19, 2021: Scientists have combined NASA data and cutting-edge image processing to gain new insight into the solar structures that create the Sun's flow of high-speed solar wind, detailed in new research published today in The Astrophysical Journal. This first look at relatively small features, dubbed "plumelets," could help scientists understand how and why disturbances form in the solar wind. 24)
- The Sun's magnetic influence stretches billions of miles, far past the orbit of Pluto and the planets, defined by a driving force: the solar wind. This constant outflow of solar material carries the Sun's magnetic field out into space, where it shapes the environments around Earth, other worlds, and in the reaches of deep space. Changes in the solar wind can create space weather effects that influence not only the planets, but also human and robotic explorers throughout the solar system — and this work suggests that relatively small, previously-unexplored features close to the Sun's surface could play a crucial role in the solar wind's characteristics.
- Like all solar material, which is made up of a type of ionized gas called plasma, the solar wind is controlled by magnetic forces. And the magnetic forces in the Sun's atmosphere are particularly complex: The solar surface is threaded through with a constantly-changing combination of closed loops of magnetic field and open magnetic field lines that stretch out into the solar system.
- It's along these open magnetic field lines that the solar wind escapes from the Sun into space. Areas of open magnetic field on the Sun can create coronal holes, patches of relatively low density that appear as dark splotches in certain ultraviolet views of the Sun. Often, embedded within these coronal holes are geysers of solar material that stream outward from the Sun for days at a time, called plumes. These solar plumes appear bright in extreme ultraviolet views of the Sun, making them easily visible to observatories like NASA's Solar Dynamics Observatory satellite and other spacecraft and instruments. As regions of particularly dense solar material in open magnetic field, plumes play a large role in creating the high-speed solar wind — meaning that their attributes can shape the characteristics of the solar wind itself.
- Using high-resolution observations from NASA's SDO (Solar Dynamics Observatory) satellite, along with an image processing technique developed for this work, Uritsky and collaborators found that these plumes are actually made up of much smaller strands of material, which they call plumelets. While the entirety of the plume stretches out across about 70,000 miles in SDO's images, the width of each plumelet strand is only a few thousand miles across, ranging from around 2,300 miles at the smallest to around 4,500 miles in width for the widest plumelets observed.
- Though earlier work has hinted at structure within solar plumes, this is the first time scientists have observed plumelets in sharp focus. The techniques used to process the images reduced the "noise" in the solar images, creating a sharper view that revealed the plumelets and their subtle changes in clear detail.
- Their work, focused on a solar plume observed on July 2-3, 2016, shows that the plume's brightness comes almost entirely from the individual plumelets, without much additional fuzz between structures. This suggests that plumelets are more than just a feature within the larger system of a plume, but rather the building blocks of which plumes are made.
- "People have seen structure in and at the base of plumes for a while," said Judy Karpen, one of the authors of the study and chief of the Space Weather Laboratory in the Heliophysics Science Division at NASA Goddard. "But we've found that the plume itself is a bundle of these denser, flowing plumelets, which is very different from the picture of plumes we had before."
- They also found that the plumelets move individually, each oscillating on its own — suggesting that the small-scale behavior of these structures could be a major driver behind disruptions in the solar wind, in addition to their collective, large-scale behavior.
Searching for Plumelet Signatures
- The processes that create the solar wind often leave signatures in the solar wind itself — changes in the wind's speed, composition, temperature, and magnetic field that can provide clues about the underlying physics on the Sun. Solar plumelets may also leave such fingerprints, revealing more about their exact role in the solar wind's creation, even though finding and interpreting them can be its own complex challenge.
- One key source of data will be NASA's Parker Solar Probe, which has flown closer to the Sun than any other spacecraft — reaching distances as close as 4 million miles from the solar surface by the end of its mission — captures high-resolution measurements of the solar wind as it swings by the Sun every few months. Its observations, closer to the Sun and more detailed than those from prior missions, could reveal plumelet signatures.
- In fact, one of Parker Solar Probe's early and unexpected findings might be connected to plumelets. During its first solar flyby in November 2018, Parker Solar Probe observed sudden reversals in the magnetic field direction of the solar wind, nicknamed "switchbacks." The cause and the exact nature of the switchbacks is still a mystery to scientists, but small-scale structures like plumelets could produce similar signatures.
- Finding signatures of the plumelets within the solar wind itself also depends on how well these fingerprints survive their journey away from the Sun — or whether they would be smudged out somewhere along the millions of miles they travel from the Sun to our observatories in space.
- Evaluating that question will rely on remote observatories, like ESA and NASA's Solar Orbiter, which has already taken the closest-ever images of the Sun, including a detailed view of the solar surface — images that will only improve as the spacecraft gets closer to the Sun. NASA's upcoming PUNCH mission — led by Craig DeForest, one of the authors on the plumelets study — will study how the Sun's atmosphere transitions to the solar wind and could also provide answers to this question.
- "PUNCH will directly observe how the Sun's atmosphere transitions to the solar wind," said Uritsky. "This will help us understand if the plumelets can survive as they propagate away from the Sun — if can they actually be injected into the solar wind."
• January 15, 2021: NASA's images of the Sun's dynamic and — dazzling beauty have captivated the attention of millions. In 2021, the US Postal Service is showcasing the Sun's many faces with a series of Sun Science forever stamps that show images of solar activity captured by NASA's Solar Dynamics Observatory, or SDO. 25)
- "I have been a stamp collector all my life and I can't wait to see NASA science highlighted in this way," said Thomas Zurbuchen, associate administrator for NASA's Science Mission Directorate (SMD) in Washington. "I feel that the natural world around us is as beautiful as art, and it's inspiring to be able to share the import and excitement of studying the Sun with people around the country."
- The 20-stamp set features ten images that celebrate the science behind NASA's ongoing exploration of our nearest star. The images display common events on the Sun, such as solar flares, sunspots and coronal loops. SDO has kept a constant eye on the Sun for over a decade. Outfitted with equipment to capture images of the Sun in multiple wavelengths of visible, ultraviolet, and extreme ultraviolet light, SDO has gathered hundreds of millions of images during its tenure to help scientists learn about how our star works and how its constantly churning magnetic fields create the solar activity we see.
- That solar activity can drive space weather closer to Earth that can interfere with technology and radio communications in space. In addition to this immediate relevancy to our high-tech daily lives, the study of the Sun and its influence on the planets and space surrounding it – a field of research known as heliophysics – holds profound implications for the understanding of our solar system and the thousands of solar systems that have been discovered beyond our own. As our closest star, the Sun is the only nearby star that humans are able to study in great detail, making it a vital source of data.
• January 4, 2021: A secret behind the workings of sunquakes – seismic activity on the Sun during solar flares – might be hidden beneath the solar surface. 26)
- These earthquake-like events release acoustic energy in the form of waves that ripple along the Sun's surface, like waves on a lake, in the minutes following a solar flare – an outburst of light, energy, and material seen in the Sun's outer atmosphere.
- Scientists have long suspected that sunquakes are driven by magnetic forces or heating of the outer atmosphere, where the flare occurs. These waves were thought to dive down through the Sun's surface and deep into its interior. But new results, using data from NASA's SDO (Solar Dynamics Observatory), have found something different.
- In July 2011, SDO observed a sunquake with unusually sharp ripples emanating from a moderately strong solar flare. Scientists were able to track the waves that caused these ripples back to their source, using a technique called helioseismic holography. This technique, which used SDO's Helioseismic and Magnetic Imager to measure how the solar surface was moving, has previously been used to track acoustic waves from a variety of other sources in the Sun.
- Instead of the waves traveling into the Sun from above, the scientists saw the surface ripples of a sunquake emerging from deep beneath the solar surface right after a flare occurred. The results, published in the journal Astrophysical Journal Letters, found the acoustic source was around 700 miles below the surface of the Sun – not above the surface as previously was thought. 27)
- The scientists believe that these waves were driven by a submerged source, which was in turn somehow triggered by the solar flare in the atmosphere above. The new findings might help explain a long-standing mystery about sunquakes: why some of their characteristics look remarkably different from the flares that trigger them.
- The scientists still haven't identified exactly what mechanism actually causes sunquakes, though the results do provide the clue that their origins likely lurk beneath the surface. The scientists plan to continue searching for a mechanism by looking at other sunquakes to see if they have similarly submerged sources.
• September 21, 2020. Solar flares are violent explosions on the sun that fling out high-energy charged particles, sometimes toward Earth, where they disrupt communications and endanger satellites and astronauts. 28)
- But as scientists discovered in 1996, flares can also create seismic activity — sunquakes — releasing impulsive acoustic waves that penetrate deep into the sun's interior.
- While the relationship between solar flares and sunquakes is still a mystery, new findings suggest that these "acoustic transients" — and the surface ripples they generate — can tell us a lot about flares and may someday help us forecast their size and severity.
- A team of physicists from the United States, Colombia and Australia has found that part of the acoustic energy released from a flare in 2011 emanated from about 1,000 kilometers beneath the solar surface — the photosphere — and, thus, far beneath the solar flare that triggered the quake.
- The results, reported today in The Astrophysical Journal Letters, come from a diagnostic technique called helioseismic holography, introduced in the late 1900s by French scientist Francoise Roddier and extensively developed by U.S. scientists Charles Lindsey and Douglas Braun, now at NorthWest Research Associates in Boulder, Colorado, and co-authors of the paper. 29) 30)
- Helioseismic holography allows scientists to analyze acoustic waves triggered by flares to probe their sources, much as seismic waves from megaquakes on Earth allow seismologists to locate their epicenters. The technique was first applied to acoustic transients released from flares by a graduate student in Romania, Alina-Catalina Donea, under the supervision of Lindsey and Braun. Donea is now at Monash University in Melbourne, Australia.
- "It‘s the first helioseismic diagnostic specifically designed to directly discriminate the depths of the sources it reconstructs, as well as their horizontal locations," Braun said.
- "We can't see the sun's inside directly. It is opaque to the photons that show us the sun's outer atmosphere, from where they can escape to reach our telescopes," said co-author Juan Camilo Buitrago-Casas, a University of California, Berkeley, doctoral student in physics from Colombia. "The way we can know what happens inside of the sun is via seismic waves that make ripples on the solar surface similar to those caused by earthquakes on our planet. A big explosion, such as a flare, can inject a powerful acoustic pulse into the sun, whose subsequent signature we can use to map its source in some detail. The big message of this paper is that the source of at least some of this noise is deeply submerged. We are reporting the deepest source of acoustic waves so far known in the sun."
How Sunquakes Produce Ripples on the Sun's Surface
- The acoustic explosions that cause sunquakes in some flares radiate acoustic waves in all directions, primarily downward. As the downward-traveling waves move through regions of ever-increasing temperature, their paths are bent by refraction, ultimately heading back up to the surface, where they create ripples like those seen after throwing a pebble in a pond. The time between the explosion and the arrival of the ripples is about 20 minutes.
- "The ripples, then, are not just a surface phenomenon, but the surface signature of waves that have gone deep beneath the active region and then back up to the outlying surface in the succeeding hour," Lindsey said. Analyzing the surface ripples can pinpoint the source of the explosion.
- "It has been widely supposed that the waves released by acoustically active flares are injected into the solar interior from above. What we are finding is the strong indication that some of the source is far beneath the photosphere," said Juan Carlos Martínez Oliveros, a solar physics researcher at UC Berkeley's Space Sciences Laboratory and a native of Colombia. "It seems like the flares are the precursor, or trigger, to the acoustic transient released. There is something else happening inside the sun that is generating at least some part of the seismic waves."
- "Using an analogy from medicine, what we (solar physicists) were doing before is like using X-rays to look at one snapshot of the interior of the sun. Now, we are trying to do a CAT scan, to view the solar interior in three dimensions," added Martínez Oliveros.
- The Colombians, including students Ángel Martínez and Valeria Quintero Ortega at Universidad Nacional de Colombia, in Bogotá, are co-authors of the ApJ"We have known about acoustic waves from flares for a little over 20 years now, and we have been imaging their sources horizontally since that time. But we have only recently discovered that some of those sources are submerged below the solar surface," said Lindsey. "This may help explain a great mystery: Some of these acoustic waves have emanated from locations that are devoid of local surface disturbances that we can directly see in electromagnetic radiation. We have wondered for a long time how this can happen." Letters paper with their supervisor, Benjamín Calvo-Mozo, associate professor of astronomy.
- "We have known about acoustic waves from flares for a little over 20 years now, and we have been imaging their sources horizontally since that time. But we have only recently discovered that some of those sources are submerged below the solar surface," said Lindsey. "This may help explain a great mystery: Some of these acoustic waves have emanated from locations that are devoid of local surface disturbances that we can directly see in electromagnetic radiation. We have wondered for a long time how this can happen."
A Seismically Active Sun
- For more than 50 years, astronomers have known that the sun reverberates with seismic waves, much like the Earth and its steady hum of seismic activity. This activity, which can be detected by the Doppler shift of light emanating from the surface, is understood to be driven by convective storms that form a patchwork of granules about the size of Texas, covering the sun's surface and continually rumbling.
- Amid this background noise, magnetic regions can set off violent explosions releasing waves that make the spectacular ripples that then appear on the sun's surface in the succeeding hour, as discovered 24 years ago by astronomers Valentina Zharkova and Alexander Kosovichev.
- As more sunquakes have been discovered, flare seismology has blossomed, as have the techniques to explore their mechanics and their possible relationship to the architecture of magnetic flux underlying active regions.
- Among the open questions: Which flares do and don't produce sunquakes? Can sunquakes occur without a flare? Why do sunquakes emanate primarily from the edges of sunspots, or penumbrae? Do the weakest flares produce quakes? What is the lower limit?
- Until now, most solar flares have been studied as one-offs, since strong flares, even during times of maximum solar activity, may occur only a few times a year. The initial focus was on the largest, or X-class, flares, classified by the intensity of the soft X-rays they emit. Buitrago-Casas, who obtained his bachelor's and master's degrees from Universidad Nacional de Colombia, teamed up with Lindsey and Martínez Oliveros to conduct a systematic survey of relatively weak solar flares to increase their database, for a better understanding of the mechanics of sunquakes.
- Of the 75 flares captured between 2010 and 2015 by the RHESSI satellite — a NASA X-ray satellite designed, built and operated by the Space Sciences Laboratory and retired in 2018 — 18 produced sunquakes. One of Buitrago-Casas's acoustic transients, the one released by the flare of July 30, 2011, caught the eyes of undergraduate students Martínez, now a graduate student, and Quintero Ortega.
- "We gave our student collaborators at the National University the list of flares from our survey. They were the first ones who said, ‘Look at this one. It's different! What happened here?'" Buitrago-Casas said. "And so, we found out. It was super exciting!"
- Martínez and Quintero Ortega are the first authors on a paper describing the extreme impulsivity of the waves released by that flare of July 30, 2011, that appeared in the May 20, 2020, issue of The Astrophysical Journal Letters. These waves had spectral components that gave the researchers unprecedented spatial resolution of their source distributions.
- Thanks to superb data from NASA's Solar Dynamics Observatory satellite, the team was able to pinpoint the source of the explosion that generated the seismic waves 1,000 kilometers below the photosphere. This is shallow, relative to the sun's radius of nearly 700,000 kilometers, but deeper than any previously known acoustic source in the sun.
- A source submerged below the sun's photosphere with its own morphology and no conspicuous directly overlying disturbance in the outer atmosphere suggests that the mechanism that drives the acoustic transient is itself submerged.
- "It may work by triggering a compact explosion with its own energy source, like a remotely triggered earthquake," Lindsey said. "The flare above shakes something beneath the surface, and then a very compact unit of submerged energy gets released as acoustic sound," he said. "There is no doubt that the flare is involved, it's just that the existence of this deep compact source suggests the possibility of a separate, distinctive, compact, submerged energy source driving the emission."
- About half of the medium-sized solar flares that Buitrago-Casas and Martínez Oliveros have catalogued have been associated with sunquakes, showing that they commonly occur together. The team has since found other submerged sources associated with even weaker flares.
- The discovery of submerged acoustic sources opens the question of whether there are instances of acoustic transients being released spontaneously, with no surface disturbance, or no flare, at all.
- "If sunquakes can be generated spontaneously in the sun, this might lead us to a forecasting tool, if the transient can come from magnetic flux that has yet to break the sun's surface," Martínez Oliveros said. "We could then anticipate the inevitable subsequent emergence of that magnetic flux. We may even forecast some details about how large an active region is about to appear and what type — even, possibly, what kinds of flares — it might produce. This is a long shot, but well worth looking into."
• September 15, 2020: Solar Cycle 25 has begun. During a media event on Tuesday, experts from NASA and the National Oceanic and Atmospheric Administration (NOAA) discussed their analysis and predictions about the new solar cycle – and how the coming upswing in space weather will impact our lives and technology on Earth, as well as astronauts in space. 31)
- The Solar Cycle 25 Prediction Panel, an international group of experts co-sponsored by NASA and NOAA, announced that solar minimum occurred in December 2019, marking the start of a new solar cycle. Because our Sun is so variable, it can take months after the fact to declare this event. Scientists use sunspots to track solar cycle progress; the dark blotches on the Sun are associated with solar activity, often as the origins for giant explosions – such as solar flares or coronal mass ejections – which can spew light, energy, and solar material into space.
- "As we emerge from solar minimum and approach Cycle 25's maximum, it is important to remember solar activity never stops; it changes form as the pendulum swings," said Lika Guhathakurta, solar scientist at the Heliophysics Division at NASA Headquarters in Washington.
- NASA and NOAA, along with the Federal Emergency Management Agency and other federal agencies and departments, work together on the National Space Weather Strategy and Action Plan to enhance space weather preparedness and protect the nation from space weather hazards. NOAA provides space weather predictions and satellites to monitor space weather in real time; NASA is the nation's research arm, helping improve our understanding of near-Earth space, and ultimately, forecasting models.
- Space weather predictions are also critical for supporting Artemis program spacecraft and astronauts. Surveying this space environment is the first step to understanding and mitigating astronaut exposure to space radiation. The first two science investigations to be conducted from the Gateway will study space weather and monitor the radiation environment in lunar orbit. Scientists are working on predictive models so they can one day forecast space weather much like meteorologists forecast weather on Earth.
- "There is no bad weather, just bad preparation," said Jake Bleacher, chief scientist for NASA's Human Exploration and Operations Mission Directorate at the agency's Headquarters. "Space weather is what it is – our job is to prepare."
- Understanding the cycles of the Sun is one part of that preparation. To determine the start of a new solar cycle, the prediction panel consulted monthly data on sunspots from the World Data Center for the Sunspot Index and Long-term Solar Observations, located at the Royal Observatory of Belgium in Brussels, which tracks sunspots and pinpoints the solar cycle's highs and lows.
- "We keep a detailed record of the few tiny sunspots that mark the onset and rise of the new cycle," said Frédéric Clette, the center's director and one of the prediction panelists. "These are the diminutive heralds of future giant solar fireworks. It is only by tracking the general trend over many months that we can determine the tipping point between two cycles."
- With solar minimum behind us, scientists expect the Sun's activity to ramp up toward the next predicted maximum in July 2025. Doug Biesecker, panel co-chair and solar physicist at NOAA's Space Weather Prediction Center (SWPC) in Boulder, Colorado, said Solar Cycle 25 is anticipated to be as strong as the last solar cycle, which was a below-average cycle, but not without risk.
- "Just because it's a below-average solar cycle, doesn't mean there is no risk of extreme space weather," Biesecker said. "The Sun's impact on our daily lives is real and is there. SWPC is staffed 24/7, 365 days a year because the Sun is always capable of giving us something to forecast."
- Elsayed Talaat, director of Office of Projects, Planning, and Analysis for NOAA's Satellite and Information Service in Silver Spring, Maryland, described the nation's recent progress on the Space Weather Action Plan as well as on upcoming developments, including NOAA's Space Weather Follow-On L-1 observatory, which launches in 2024, before Solar Cycle 25's predicted peak.
- "Just as NOAA's National Weather Service makes us a weather-ready nation, what we're driving to be is a space weather-ready nation," Talaat said. "This is an effort encompassing 24 agencies across the government, and it has transformed space weather from a research perspective to operational knowledge."
• August 18, 2020: Solar flares emit sudden, strong bursts of electromagnetic radiation from the Sun's surface and its atmosphere, and eject plasma and energetic particles into inter-planetary space. Since large solar flares can cause severe space weather disturbances affecting Earth, to mitigate their impact their occurrence needs to be predicted. However, as the onset mechanism of solar flares is unclear, most flare prediction methods so far have relied on empirical methods. 32)
- The research team led by Professor Kanya Kusano (Director of the Institute for Space-Earth Environmental Research, Nagoya University) recently succeeded in developing the first physics-based model that can accurately predict imminent large solar flares. The work was published in the journal Science on July 31, 2020. 33)
- The new method of flare prediction, called the kappa scheme, is based on the theory of "double-arc instability," that is a magnetohydrodynamic (MHD) instability triggered by magnetic reconnection. The researchers assumed that a small-scale reconnection of magnetic field lines can form a double-arc (m-shape) magnetic field and trigger the onset of a solar flare (Figure 34). The kappa scheme can predict how a small magnetic reconnection triggers a large flare and how a large solar flare can occur.
The predictive model was tested on about 200 active regions during solar cycle 24 from 2008 to 2019 using data obtained by NASA's Solar Dynamics Observatory (SDO) satellite. It was demonstrated that with few exceptions, the kappa-scheme predicts most imminent solar flares, as well as the precise location they will emerge from (Figure 35). The researchers also discovered that a new parameter — the "magnetic twist flux density" close to a magnetic polarity inversion line on the solar surface — determines when and where solar flares probably occur and how large they are likely to be.
- Previous flare prediction methods have relied on empirical relations in which the predictions of the previous day tend to continue into the next day even if flare activity changes. In contrast, the kappa-scheme predicts large solar flares through a physics-based approach regardless of previous flare activity. While it takes a lot more work to implement the scheme in real-time operational forecasting, this study shows that the physics-based approach may open a new direction for flare prediction research.
• July 28, 2020: In a study published in Nature Astronomy, an international team of researchers has presented a new, detailed look inside the "central engine" of a large solar flare accompanied by a powerful eruption first captured on Sept. 10, 2017 by the Owens Valley Solar Array (EOVSA) — a solar radio telescope facility operated by New Jersey Institute of Technology's (NJIT) Center for Solar-Terrestrial Research (CSTR). 34)
- The new findings, based on EOVSA's observations of the event at microwave wavelengths, offer the first measurements characterizing the magnetic fields and particles at the heart of the explosion. The results have revealed an enormous electric current "sheet" stretching more than 40,000 kilometers through the core flaring region where opposing magnetic field lines approach each other, break and reconnect, generating the intense energy powering the flare. 35)
- Notably, the team's measurements also indicate a magnetic bottle-like structure located at the top of the flare's loop-shaped base (known as the flare arcade) at a height of nearly 20,000 kilometers above the Sun's surface. The structure, the team suggests, is likely the primary site where the flare's highly energetic electrons are trapped and accelerated to nearly the speed of light.
- "...the measured magnetic field profile of the current sheet beautifully matched the theoretical prediction made decades ago.
- Researchers say the study's new insight into the central engine that drives such powerful eruptions may aid future space weather predictions for potentially catastrophic energy releases from solar flares — the solar system's most powerful explosions, capable of severely disrupting technologies on Earth such as satellite operations, GPS navigation and communication systems, among many others.
- "One of the major goals of this research is to better understand the fundamental physics of solar eruptions," said Bin Chen, the paper's lead author and professor of physics at NJIT. "It has been long suggested that the sudden release of magnetic energy through the reconnection current sheet is responsible for these major eruptions, yet there has been no measurement of its magnetic properties. With this study we've finally measured the details of the magnetic field of a current sheet for the first time, giving us a new understanding of the central engine of the Sun's major flares."
- "The place where all the energy is stored and released in solar flares has been invisible until now. To play on a term from cosmology, it is the Sun's ‘dark energy problem,' and previously we've had to infer indirectly that the flare's magnetic reconnection sheet existed," said Dale Gary, EOVSA director at NJIT and co-author of the paper. "EOVSA's images made at many microwave frequencies showed we can capture radio emissions to illuminate this important region. Once we had that data, and the analysis tools created by co-authors Gregory Fleishman and Gelu Nita, we were able to start analyzing the radiation to enable these measurements."
- Earlier this year in the journal Science, the team reported it could finally provide quantitative measurements of the evolving magnetic field strength directly following the flare's ignition.
- Continuing their investigation, the team's latest analysis combined numerical simulations performed at Center for Astrophysics | Harvard & Smithsonian (CfA) with EOVSA's spectral imaging observations and multiwavelength data — spanning radio waves to X-rays — collected from the X8.2-sized solar flare. The flare is the second largest to have occurred from the past 11-year solar cycle, occurring with a fast coronal mass ejection (CME) that drove a large-scale shock in the upper solar corona.
- Among the study's surprises, the researchers found that the measured profile of the magnetic field along the flare's current sheet feature closely matched predictions from the team's numerical simulations, which were based on a well-known theoretical model for explaining solar flare physics, first proposed in the 1990s with an analytical form.
- "It surprised us that the measured magnetic field profile of the current sheet beautifully matched the theoretical prediction made decades ago," said Chen.
- "The force of the Sun's magnetic field plays a key role in accelerating plasma during an eruption. Our model was used for computing the physics of the magnetic forces during this eruption, which manifests as a highly twisted ‘rope' of magnetic field lines, or magnetic flux rope," explained Kathy Reeves, astrophysicist at CfA and co-author of the study. "It is remarkable that this complicated process can be captured by a straightforward analytical model, and that the predicted and measured magnetic fields match so well."
- The simulations, performed by Chengcai Shen at CfA, were developed to numerically solve governing equations for quantifying the behavior of electrically conducting plasma throughout the flare's magnetic field. By applying an advanced computational technique known as "adaptive mesh refinement," the team was able to resolve the thin reconnection current sheet and capture its detailed physics at superfine spatial scales to below 100 km.
- "Our simulation results match both the theoretical prediction on magnetic field configuration during a solar eruption and reproduce a set of observable features from this particular flare, including magnetic strength and plasma inflow/outflows around the reconnecting current sheet," Shen noted.
Shocking Measurements
- The team's measurements and matching simulation results revealed that the flare's current sheet features an electric field that produces a shocking 4,000 volts per meter. Such a strong electric field is present over a 40,000 km region, greater than the length of three Earths placed together side by side.
- The analysis also showed a huge amount of magnetic energy being pumped into the current sheet at an estimated rate of 10-100 billion trillion (1022-1023) joules per second — that is, the amount of energy being processed at the flare's engine, within each second, is equivalent to the total energy released by the explosion of about a hundred thousand of the most powerful hydrogen bombs (50-megaton-class) at the same time.
- "Such an enormous energy release at the current sheet is mind-blowing. The strong electric field generated there can easily accelerate the electrons to relativistic energies, but the unexpected fact we found was that the electric field profile in the current sheet region did not coincide with the spatial distribution of relativistic electrons that we measured," said Chen. "In other words, something else had to be at play to accelerate or redirect these electrons. What our data showed was a special location at the bottom of the current sheet — the magnetic bottle — appears to be crucial in producing or confining the relativistic electrons."
- "While the current sheet seems to be the place where the energy is released to get the ball rolling, most of the electron acceleration appears to be occurring in this other location, the magnetic bottle. ... Similar magnetic bottles are under development for confining and accelerating particles in some laboratory fusion reactors." added Gary. "Others have proposed such a structure in solar flares before, but we can truly see it now in the numbers."
- Approximately 99% of the flare's relativistic electrons were observed congregating at the magnetic bottle throughout the duration of the five-minute-long emission.
- For now, Chen says the group will be able to apply these new measurements as a comparative baseline to study other solar flare events, as well as explore the exact mechanism that accelerates particles by combining the new observations, numerical simulations and advanced theories. Because of the breakthrough capabilities of EOVSA, NJIT was recently selected to participate in a joint NASA/NSF DRIVE Science Center Collaboration on Solar Flare Energy Release (SolFER).
- "Our goal is to develop a full understanding of solar flares, from their initiation until they finally spray out highly energized particles into the solar wind, and eventually, into the space environment of Earth," said Jim Drake, professor of physics at the University of Maryland and principal investigator of SolFER who was not involved in this study. "These first observations are already suggesting that relativistic electrons might be trapped in a large magnetic bottle produced as the magnetic fields of the corona ‘reconnect' to release their energy. ... The EOVSA observations will continue helping us unravel how the magnetic field drives these energetic electrons."
- "Further investigating the role of the magnetic bottle in particle acceleration and transport will require more advanced modeling to compare with EOVSA's observations," said Chen. "There are certainly huge prospects out there for us to study that address these fundamental questions."
Sensor Complement
The SDO sensor complement consists of three instruments which are pointed toward the sun to provide continuous, high cadence (cyclic) observations of the full solar disk and coronal imaging in multiple wavelengths to improve the understanding and forecasting of the sun's impact on our terrestrial environment. 36) 37)
• HMI (Helioseismic and Magnetic Imager) measures the surface magnetic fields and the flows that distribute it on global and local solar scales. A study of the origins of solar variability using solar oscillations and the longitudinal photospheric magnetic field to characterize and understand the sun's interior and the various components of magnetic activity.
• AIA (Atmospheric Imaging Assembly) images the solar outer atmosphere. A study of coronal energy storage and release evidenced in rapidly evolving coronal structures over a broad temperature range that are intrinsically tied to the Sun's magnetic field and irradiance variations.
• EVE (EUV Variability Experiment), a spectrometer/spectrograph providing the solar full-disk distribution of the spectral irradiance in the EUV and UV ranges that cause variations in composition, density, and temperature of the Earth's ionosphere and thermosphere. A study of the sun's transient and steady state coronal plasma emissions that are driven by variations in the solar magnetic field.
HMI (Helioseismic and Magnetic Imager)
The HMI instrument is being developed at LMSAL (Lockheed Martin, Solar & Astrophysics Laboratory) in Palo Alto, CA (PI: P. Scherrer of Stanford University). HMI is a joint project of the Stanford University, Hansen Experimental Physics Laboratory, and LMSAL, with key contributions from the High Altitude Observatory of NCAR, and the HMI Science Team. The overall objective of HMI is to extend the capabilities of the SOHO/MDI (Michelson Doppler Imager) instrument with continuous full-disk coverage at considerably higher spatial and temporal resolution line-of-sight magnetograms with the optional channel for full Stokes polarization measurements [I = (I; Q; U; V)] and hence vector magnetogram determination (3-D imagery of the sun's interior employing a technique known as helioseismology, which maps the inside of the sun by measuring the velocity of low-frequency sound waves that ricochet below its surface). 38) 39) 40) 41) 42)
Note: Since the two instruments, HMI and AIA, are both being developed at LMSAL, there is a lot of organizational synergism and cooperation between the two instruments on all levels.
HMI makes interference measurements of the motion of the solar photosphere to study solar oscillations and measurements of the polarization in a spectral line to study all three components of the photospheric magnetic field. HMI produces data to determine the interior sources and mechanisms of solar variability and how the physical processes inside the sun are related to surface magnetic field and activity. It also produces data to enable estimates of the coronal magnetic field for studies of variability in the extended solar atmosphere. HMI observations will enable establishing the relationships between the internal dynamics and magnetic activity in order to understand solar variability and its effects, leading to reliable predictive capability, one of the key elements of the LWS (Living With a Star) program.
The HMI observation goals are being addressed in a coordinated investigation in a number of parallel studies:
• Convection-zone dynamics and the solar dynamo
• Origin and evolution of sunspots, active regions and complexes of activity
• Sources and drivers of solar activity and disturbances
• Links between the internal processes and dynamics of the corona and heliosphere
• Precursors of solar disturbances for space-weather forecasts.
HMI will observe the full solar disk in the Fe I absorption line at 6173 Å (goal of 1 arcsecond resolution). The HMI instrument will produce measurements in the form of filtergrams in a set of polarizations and spectral line positions at a regular cadence for the duration of the mission that meet these basic requirements:
8) Full-disk Doppler velocity and line-of-sight magnetic flux images with 1.5 arcsec resolution at least every 50 seconds
9) Full-disk vector magnetic images of the solar magnetic field with 1.5 arc-sec resolution at least every 10 minutes.
The primary observables (Dopplergrams, longitudinal and vector magnetograms, and continuum intensity images) will be constructed from the raw filtergrams and will be made available at full resolution and cadence. Other derived products such as subsurface flow maps, far-side activity maps, and coronal and solar wind models that require longer sequences of observations shall be produced and made available.
In effect the solar turbulence is analogous to earthquakes. In manner similar to how seismologists can learn about the interior of the Earth by studying the waves generated in an earthquake. HMI's helioseismologists learn about the structure, temperature and flows in the solar interior.
The HMI instrument consists of a refracting telescope, a polarization selector, an image stabilization system (ISS), a narrow-band tunable filter. In addition, there are two 4096 x 4096 pixel CCD cameras with mechanical shutters and control electronics. The twin cameras of HMI operate independently. One is referred to as the "Doppler camera"; the objective is to measure the line-of-sight component of the magnetic field and velocity vectors. The second camera is referred to as "Magnetic camera"; the objective is to measure the vector magnetic field and line of sight velocities. 43)
The optics package consists of the following elements:
- Telescope section
- Polarization selectors - 3 rotating waveplates for redundancy
- Focus blocks
- ISS (Image Stabilization System)
- 5 element Lyot filter. One element tuned by rotating waveplate
- 2 tunable Michelson interferometers. 2 waveplates and 1 polarizer for redundancy
- Reimaging optics and beam distribution system
- Shutters
- 2 functionally identical CCD cameras - "Doppler" and "Magnetic"
The combined Lyot-Michelson filter system in HMI produces a transmission profile with a FWHM of 76 mÅ. The tuning positions are 69 mÅ apart from each other.
Center wavelength | 6173.3 Å ± 0.1 Å(Fe I line) |
Filter bandwidth, Filter tuning range | 76 mÅ ± 10 mÅ FWHM, 680 mÅ ± 68 mÅ |
Center wavelength drift | < 10 mÅ during any 1 hour period |
FOV (Field of View), Angular resolution | > 2000 arcsec, < 1.5 arcsec |
Focus adjustment range | ±4 depths of focus |
Pointing jitter reduction factor | > 40dB with servo bandwidth > 30 Hz |
Image stabilization offset range | > ±14 arcsec in pitch and yaw |
Pointing adjustment range | > ±200 arcsec in pitch and yaw |
Pointing adjustment step size | < 2 arc-seconds in pitch and yaw |
Dopplergram cadence, Image cadence for each camera | < 50 seconds, < 4 seconds |
Full image readout rate | < 3.2 seconds |
Exposure knowledge, Timing accuracy | < 5 µs, < 0.1 seconds of ground reference time |
Detector format, Detector resolution | ≥ 4000 x 4000 pixels, 0.50 ±0.01 arc-second / pixel |
Science telemetry compression | To fit without loss in allocated telemetry |
Eclipse recovery | < 60 minutes after eclipse end |
Instrument design life | 5 years |
Allocated data rate for instrument | 55 Mbit/s |
PCU (Polarization Calibration Unit)
HMI polarization calibration requires the input of fixed polarization states into the instrument and the measurement of the observed parameters with the HMI. The PCU creates the polarization states by using a linear polarizer and retarder (wave plate) that can be inserted into the optical path and rotated independently. The PCU consists of a TCP/IP control interface (Newport XPS-C4) and two mechanical units (size: 787 mm x 508 mm x 203 mm), with 175 mm clear apertures that house the polarization optics. Each mechanical unit contains a linear and a rotational stage. The linear stages (Newport IMS300CC) move the polarization optics into and out of the optical path with a linear position resolution of 1.25 microns. The rotational stages (Newport RV240CC) move the calibration optics to any given angle with a resolution of 0.001º. 44)
AIA (Atmospheric Imaging Assembly)
The AIA instrument is being designed and developed at LMSAL (Lockheed Martin Solar and Astrophysics Laboratory), Palo Alto, CA; (PI: Alan Title, LMSAL). The AIA science team includes scientists and engineers from many national and international institutions. The SAO (Smithsonian Astrophysical Observatory) has a major role in the AIA program.
The objective is to provide an unprecedented view of the solar corona, taking images that span at least 1.3 solar diameters in multiple wavelengths nearly simultaneously, at a resolution of about 1 arcsec and at a cadence of 10 seconds or better. The primary goal of the AIA science investigation is to use these data, together with data from other SDO instruments, as well as from other observatories, to significantly improve our understanding of the physics behind the activity displayed by the sun's atmosphere, which drives space weather in the heliosphere and in planetary environments. 45) 46)
Themes of the AIA Investigation
1) Energy input, storage, and release: the 3-D dynamic coronal structure.
3-D configuration of the solar corona; mapping magnetic free energy; evolution of the corona towards unstable configurations; the life-cycle of atmospheric field
2) Coronal heating and irradiance:thermal structure and emission.
Contributions to solar (E)UV irradiance by types of features; physical properties of irradiance-modulating features; physical models of the irradiance-modulating features; physics-based predictive capability for the spectral irradiance
3) Transients: sources of radiation and energetic particles
Unstable field configurations and initiation of transients; evolution of transients; early evolution of CME's; particle acceleration
4) Connections to geospace: material and magnetic field output of the sun
Dynamic coupling of the corona and heliosphere; solar wind energetics; propagation of CMEs and related phenomena; vector field and velocity
5) Coronal seismology: a new diagnostic to access coronal physics
Evolution, propagation, and decay of transverse and longitudinal waves; probing coronal physics with waves; the role of magnetic topology in wave phenomena.
Requirement -> | Spatial coverage FOV | Temporal coverage | Thermal coverage | Intensity coverage | |||
Science theme | Δt | Continuity | Δ log T | T | Accuracy | Dynamic range | |
1) Energy input storage & release, | Full corona 40'-46' | ~10 s | Full disk passage | ~0.3 | 0.7-8 MK (full corona) | - | Large for simultaneous obs. of faint & bright structures |
2) Coronal heating & irradiance | Active regions | < 1 min, a few s in flares | Days | 0.3 for DEM investigation | 0.7-20 MK(full corona) | 10% | > 1000 |
3) Transients, | Majority of disk | A few s in flares | At least days for buildup | ~0.3 for T< 5MK, ~0.6 for T> 5MK | 5000 K - 20 MK | - | > 1000 in quiescent channels |
4) Connections to geospace | Full disk + off-limb | ~ 10 s | Continuous observing | ~ 0.3 | 5000 K - 20 MK | 10% for thermal structure | Large to study high coronal field |
5) Coronal seismology | Active regions | As short as possible | Continuous for discovery | ~ 0.5 to limit LOS confusion | multi-T observations for thermal evolution | 10% for density | > 10 |
AIA instrument design overview
• Four ST (Science Telescopes), each with 8 science channels
- 7 EUV channels in a sequence of Fe line and He 304 Å
- 1 UV channel with CTN, 1600 Å, 1700 Å filters
• Active secondaries for image stabilization. Each ST is equipped with an ISS (Image Stabilization System)
• Four GT (Guide Telescopes)
• Four 4096 x 4096 pixel thinned back-illuminated CCDs (the sampling of 0.6 arcsec requires a 4096 x 4096 pixel detector). Note, the AIA and HMI CCDs: a 4096 x 4096 pixel science-grade CCD with 12 µm pixel pitch developed by ev2 and RAL, are currently the largest CCD to have ever flown in a space mission (Ref. 43).
• Full CCD readout in 2.5 seconds
• Reconfiguration of all mechanisms in 1 second (filter wheels, sector shutter, focal plane shutters)
• Onboard data compression via several lookup tables
The AIA design provides the following instrument capabilities
• Seven EUV (Extreme Ultraviolet) and three UV/visible channels. Four of the EUV wavelength bands open new perspectives on the solar corona, having never been imaged or imaged only during brief rocket flights. The set of six EUV channels that observe ionized iron allow the construction of relatively narrow-band temperature maps of the solar corona from below 1 MK to above 20 MK.
• A field of view (FOV) exceeding 41 arcmin (or 1.28 solar radii in the EW and NS directions), with 0.6 arcsec pixels
• A detector full well > 150,000 electrons and ~ 15 e/photon, with a camera readout noise of ≤ 25 electrons
• A sustained 10 second cadence during most of the mission
• A capability to adjust the observing program to changing solar conditions in order to implement observing programs that are optimized to meet the requirements of specific scientific objectives. This allows, for example, a 2 second cadence in a reduced field of view for flare studies.
• Provision of images in multiple EUV and UV pass bands. The basic observables are full-sun intensities at a range of wavelengths. Together, these will comprise the data archive, which is freely accessible to the research community and, with limitations dictated by resources, to other interested parties.
Derived data products, such as coronal thermal charts, maps of variability, and comparisons to HMI magnetograms and to (non-)potential field extrapolations will be made available regularly through the data-processing pipeline for a subset of the data for use in evaluation of the data and to aid the discovery of phenomena and cataloging of events. Software will be made available to researchers to create these data products for other datasets; a core library of easy-to-use, publicly-available software will be developed as part of the SolarSoft IDL environment to enable and support the investigations that are required to meet the primary AIA science goals
Band name | Δλ (Å), FWHM | Primary ion(s) | Region of the sun's atmosphere | Charac.log temperature (K) |
Visible | - | Continuum | Photosphere | 3.7 |
1700 Å | - | Continuum | Temperature minimum, photosphere | 3.7 |
304 Å | 12.7 | He II | Chromosphere, transition region | 4.7 |
1600 Å | - | C IV+ continuum | Transition region+ upper photosphere | 5.0 |
171 Å | 4.7 | Fe IX | Quiet corona, upper transition region | 5.8 |
193 Å | 6.0 | Fe XII, XXIV | Corona and hot flare plasma | 6.1, 7.3 |
211 Å | 7.0 | Fe XIV | Active region corona | 6.3 |
335 Å | 16.5 | Fe XVI | Active region corona | 6.4 |
94 Å | 0.9 | Fe XVIII | Flaring regions | 6.8 |
151 Å | 4.4 | Fe XX, XXIII | Flaring regions | 7.0, 7.2 |
Implementation requirement | Implementation |
High Angular Resolution | ~0.6 arcsec pixels |
Large FOV (field and irradiance) | full sun + 2 pressure scale heights |
Large dynamic range | > 1000 |
Complete coronal temperature coverage | ~105 -107 K in 6 EUV Fe-line channels |
Coverage | UV/WL (White Light) and He II 304 Å imaging |
Adequate photo-/chromospheric coverage | 10 s baseline cadence, 2 s fastest |
Time resolution (dynamics and irradiance) | Brightness histogram feedback |
Dynamic exposure control | Continuous observations up to many weeks, spanning half a cycle |
Long-term coverage | Adequate aperture, filters, detector system |
AIA camera systems
• The camera systems with CCD detectors are key elements of HMI & AIA. The HMI and AIA instrument use identical cameras and CCDs except that the AIA CCDs are back-side thinned.
• Each CCD detector array has a size of 4096 x 4096 pixels with 12 µm pixels (they were provided by e2v technologies ltd., Chelmsford, Essex, UK)
• CEB (Camera Electronics Box): 8 Mpixel/s via 2 Mpixel/s from 4 ports simultaneously
The AIA instrument has a data rate allocation of 67 Mbit/s (max, using data compression). The data is communicated over the IEEE 1355 high-rate science data bus (SpaceWire).
Camera readout electronics: Each AIA and HMI CCD (Figure 43) is driven and read out through its own dedicated CEB (Camera Electronics Box). It has dimensions of 152 mm x 131 mm x 95 mm and a mass of 2.9 kg. The enclosure walls are 5 mm thick aluminum to ensure sufficient attenuation of space radiation over mission life. During exposures the CCD and CEB consumes 12 W rising to 17 W during readout. The CEB contains four electronics cards mounted above a separately screened input filter and DC-DC power converter. A photo of the assembled unit, minus front panel and lid, is reproduced in Figure 48 (Ref. 43).
The upper-most card carries four video processing and digitization ASICs operating in parallel at 2 Mpixel/s and each connected to one of the CCD's quadrant readout amplifiers. The second card in the stack provides all of the CCD's low-noise DC bias voltages. Supplies to each of the CCD's output amplifiers are buffered separately to minimize crosstalk between channels. An 8-channel 10-bit DAC ASIC enables software programming and fine adjustment of the bias supplies. Telemetry circuitry internal to the CEB allows monitoring of the CEB's secondary power rails, CCD bias voltages and the CCD and CEB operating temperatures. The third card carries a waveform generator and sequencer ASIC and sufficient clock driver buffers to enable CCD readout through any or all of its quadrant readout amplifiers. The final card provides a SpaceWire communications interface with the main AIA or HMI control electronics. A single link is used for programming the CEB's ASICs and registers, commanding a CCD readout and the return of the CCD's digitized video data at 200 Mbit/s.
A key component of the camera electronics is a custom-designed and space-qualified CCD video signal processing and digitization ASIC. It provides 2 Mpixel/s video amplification, CDS processing and 16 bit digitization of a 1 V input signal. The design is fully-differential to aid rejection of common-mode noise. A 10-bit DAC enables ± 500 mV of programmable DC offset to be introduced into the video signal and a 7-bit programmable x1-x3 gain amplifier enables the ADC to be matched to the required CCD signal swing. The ADC is a 16 bit fully-differential pipelined converter using feedback capacitor switching in the amplifier stages, and over-ranging at intervals in order to minimize differential non-linearity due to capacitor mismatching and amplifier gain errors. Triple-voting logic is used to enhance the single-event upset tolerance of the logic and registers. The ASIC was manufactured on a 0.35 µm 3.3 V CMOS process known for its excellent tolerance to ionizing radiation. With its inputs grounded, the ASIC's noise is 3.5 ADU rms in 16 bits or 53 µV rms. The CCD provides ~ 4.5 µV/ e- and so the equivalent noise is ~ 12 e- rms. The combined noise floor of the CCD and electronics is ~ 4 ADU rms or ~ 16 e- rms. The power consumption from a 3.3 V supply is 400 mW (Ref. 43).
EVE (EUV Variability Experiment)
The Extreme ultraviolet Variability Experiment (EVE) has been designed and developed at LASP (Laboratory for Atmospheric and Space Physics) of the University of Colorado (CU) at Boulder, CO (PI T. Woods). The science team consists of members from: CU/LASP, USC (university of Southern California), NRL (Naval Research Laboratory), MIT/LL (Massachusetts Institute of Technology/ Lincoln Laboratory), NOAA, and the University of Alaska, Utah State University. The objective is to measure the solar extreme ultraviolet (EUV) irradiance with unprecedented spectral resolution, temporal cadence, accuracy, and precision. Use of physics-based models of the solar EUV irradiance to advance the understanding of the solar EUV irradiance variations based on the activity of the solar magnetic features. 47) 48) 49) 50)
Specific EVE science objectives are:
1) Specify the solar EUV spectral irradiance and its variability on multiple time scales.
- EUV: 0-105 nm (0.1 nm resolution at >10 nm) and H I Lyman-á(121.6 nm)
- Time Scales: < 20 s cadence, continuous sequence
2) Advance current understanding of how and why the solar EUV spectral irradiance varies.
- Use AIA & HMI solar images to understand the interactions of the solar magnetic fields and the evolution of the solar features (e.g., plage, active network) and how these affect the solar EUV variations
3) Improve the capability to predict the EUV spectral irradiance variability
- Develop new forecast and nowcast models of the solar EUV irradiance for use in the NOAA space weather operations
4) Understand the response of the geospace environment to variations in the solar EUV spectral irradiance and the impact on human endeavors
- Use solar EUV irradiances with thermosphere and ionosphere models to better define the solar influences on Earth's atmosphere
- Input EVE solar data near real-time into NOAA operational atmospheric models to improve accuracy of solar storm warnings and satellite drag calculations and to predict better communication disruptions
The EVE measurement approach is to observe simultaneously the solar EUV irradiance with different instrument types (multiple subsystems and technology) to meet the wavelength, resolution, and accuracy requirements.
Instrument | Type/Use | Resolution | Spectral range (nm) |
MEGS-A | Reflective grating spectrograph | 0.1 nm | 5 - 36 |
MEGS-B | Reflective grating spectrograph | 0.1 nm | 35 - 105 |
MEGS-A+SAM | Solar aspect monitor | 0.002-1 nm | 0 - 7 |
MEGS-B+Photometer | Set of filter photometers |
| H I 121.6, He 58.4 |
ESP | EUV Spectrophotometer | 4 nm | 17.5, 25.6, 30.4, 36, 58.4 |
Instrument mass, power | 54.2 kg, 47.2 W (average) |
Instrument size | 99 cm x 61 cm x 36 cm |
Data rate | 2 kbit/s (engineering), 7 Mbit/s (science) |
The EVE instrument consists of the following elements/modules: MEGS, ESP, and EEB.
• MEGS (Multiple EUV Grating Spectrograph). A set of 2 Rowland-circle grating spectrographs that measure the 5-105 nm spectral irradiance with 0.1 nm spectral resolution and with 10 second cadence. The MEGS have laminar groove profile (50% duty cycle of grooves) to suppress even orders.
Gratings:
- MEGS-A uses single, holographic, spherical grating at 80º grazing incidence
- MEGS-B uses dual, holographic, spherical grating, used near normal incidence
CCD detectors:
- CCD array type of size: 1024 x 2048 pixels (CCID-28 devices of MIT/LL, heritage: flown on Chandra and XMM/Newton)
- Back-thinned, back-illuminated
- Passively cooled to -100º C
Slits/filters:
- MEGS-A has two slits and two filters: Slit 1: Mo/C, 5-20 nm; Slit 2: Si, 17.0 -37.0 nm
- MEGS-B has one slit and no primary filter. Additional removable filters for higher order checks.
Wavelength coverage (λ) | 5 - 37 nm |
Δλ resolution | 0.1 nm |
Time cadence | 10 s |
FOV | ± 2º |
Aperture door | One-shot |
Filter wheel | 5 positions |
CCD detector | 1024 x 2048 pixels |
Power, data rate | 11 W, 3.4 Mbit/s |
Wavelength coverage (λ) | 34 - 105 nm |
Δλ resolution | 0.1 nm |
Time cadence | 10 s |
FOV | ± 2º |
Aperture door | One-shot |
Filter wheel | 5 positions |
CCD detector | 1024 x 2048 pixels |
Power, data rate | 11 W, 3.4 Mbit/s |
• MEGS-SAM (Multiple EUV Grating Spectrograph-Solar Aspect Monitor). The objective is to provide pulse height analysis of X-ray photons. The device provides also MEGS pointing information with precision of 9 arcseconds. MEGS-SAM has a wavelength coverage of 0.1 -7 nm with a spectral resolution of 0.01-1 nm, and a spatial resolution with 10 arcsec/pixel. Detector: pinhole illuminates the MEGS-A CCD.
Wavelength coverage (λ) | 0.1 - 7 nm |
Δλ resolution | 0.01 - 1 nm |
Time cadence | 10 s |
FOV | ± 2º |
Aperture door | One-shot |
Filter wheel | 5 positions |
• MEGS-P: Photometer for Lyman-α H I 121.6 nm and He I 58.4 nm emissions.
- Technique: grating + filter photometer
- MEGS-P channels are located in MEGS-B entrance baffles, providing a resolution of 5 nm
- Detector: IRD Si photodiode
- Filter: Acton Lyman-α filter and Al/Sn foil filter
Wavelength coverage (λ) | 121.6 nm |
Δλ resolution | 1 nm |
Time cadence | 0.25 s |
FOV (Field of View) | ± 2º |
Aperture door | Behind MEGS-B mechanism |
Filter wheel | Behind MEGS-B mechanism |
Si photodiode | 1 cm x 1 cm |
Power, data | 0.2 W, 1 kbit/s |
• ESP (EUV Spectrophotometer): A transmission grating spectrograph with stable Si photodiodes to provide solar X-ray measurement short of 5 nm, calibrations for MEGS sensitivity changes and higher time cadence (0.25 s). The ESP is very similar to the SOHO SEM instrument. ESP is of SEM instrument heritage flown on SOHO and also of TIMED heritage.
Wavelength coverage (λ) | - 1st order at 18.4, 25.5, 30.4, 35.5 nm |
Δλ resolution | 1st: 2 nm; 0th: 7 nm |
Time cadence | 0.25 s |
FOV (Field of View) | ± 2º |
Aperture door | One-shot |
Filter wheel | 5 positions |
Si photodiodes | 0.6 cm x 1.6 cm |
Power | 1.9 W, 7 kbit/s |
• EEB (EVE Electronics Box): Electronics that control the MEGS and ESP instruments and provides an interface to/from the SDO spacecraft.
EVE data products
• Near real-time space weather data product of the solar EUV irradiance for NOAA SEC operations
• High quality solar EUV irradiances on 10 s cadence and averaged over 1 day provided daily to EVE's archive and FTP distribution center.
Ground Segment
Data reception and spacecraft commanding will be conducted via a dedicated and newly implemented ground station at White Sands, NM. The SDO ground system consists of five major elements: 51)
1) SDOGS (SDO Ground Station), located at White Sands, NM and co-located with the WSGT (White Sands Ground Terminal) for TDRS service support. Two dual-feed antennas of 18 m diameter (S-band and Ka-band) are being allocated for SDO science data acquisition and TT&C operations support. A major function of the DDS is to continuously receive the high-rate science telemetry from the SDOGS Ka-band system and to deliver the science data to the SOCs in near real-time.
2) DDS (Data Distribution System), located at White Sands, NM.
• Receives the science telemetry data, processes it into files and distributes them to the instrument teams in near-real-time
• Provides a short-term (30 day) storage capability and supports data retransmissions as needed
• Provides the remote monitor and control capabilities of the DDS and SDOGS, from the MOC
through the DDS/SDOGS Interface Manager (DSIM) which is part of the DDS design
3) MOC (Missions Operations Center), located at GSFC
• Supports the conventional real-time TT&C functions, which allows the Flight Operations Team (FOT) to monitor the health and status of the observatory and to control its operations
• Provides mission planning, trending and analysis, remote control and monitoring of DDS and ground station functions, and flight dynamics functions, including attitude determination and control and orbit maneuver computations and execution.
4) SOC (Science Operations Center). The 3 SOCs are located at the PI home institutions:
• They provide real-time health and safety monitoring as well as the command function for the science instrument
• Provision of science mission planning
• Science data processing, analysis, archiving, and distribution to the user community
5) GRN (Ground Communications Network)
• Provides connectivity between each of the ground system elements supporting all levels of data exchange and voice communications for SDO mission operations.
- One Optical Carrier Level 3 (OC3) network to AIA (67 Mbit/s) from DDS
- One Optical Carrier Level 3 (OC3) network to HMI (55 Mbit/s) from DDS
- One T3 circuit to EVE (7 Mbit/s) from DDS
- TT&C data: Four T1 circuits from MOC to/from SDOGS for S-band housekeeping telemetry and commands, two per SDOGS antenna site (restore time is < 1minute).
References
1) A. W. Lewin, L. J. Frank, "The Living With a Star Geospace Missions," Proceedings of the AIAA/USU Conference on Small Satellites, Logan, UT, USA, Aug. 11-14, 2003, SSC03-IX-2
3) "Solar Dynamics Observatory – Exploring the Sun in High Definition," URL: http://sdo.gsfc.nasa.gov/assets/docs/sdo_factsheet.pdf
4) Tony Phillips, "Solar Dynamics Observatory: The 'Variable Sun' Mission," NASA, Feb. 5, 2010, URL: http://science.nasa.gov/headlines/y2010/05feb_sdo.htm?list1291671
5) "Solar Dynamics Observatory (SDO): Investigating the causes of solar variability and how space weather results from that variability," NASA Press Kit, January 2010, URL: http://www.nasa.gov/pdf/418329main_SDO_PressKit_020110.pdf
6) W. Dean Pesnell, B. J. Thompson, P. C. Chamberlin, "The Solar Dynamics Observatory (SDO)," Solar Physics, Volume 275, Issue 1-2, pp. 3-15, January 2012, doi: 10.1007/s11207-011-9841-3.
7) John A. Ruffa, David K. Ward, Lisa M. Bartusek, Machael Bay, Peter J. Gonzales, William D. Pesnell, "NASA's Solar Dynamics Observatory (SDO): A Systems Approach to a Complex Mission," Proceedings of the 2012 IEEE Aerospace Conference, Big Sky Montana, USA, March 3-10, 2012
8) Scott R. Starin, Melissa F. Vess, Thomas M. Kenney, Manuel D. Maldonado, Wendy M. Morgenstern, "Fault Detection and Correction for the Solar Dynamics Observatory Attitude Control System," Proceedings of the AAS Guidance and Control Conference, Breckenridge, CO, USA, Feb. 1-6, 2008, AAS 08-037
9) http://www.nasa.gov/mission_pages/sdo/launch/index.html
10) http://sdo.gsfc.nasa.gov/assets/docs/412582main_SDO-508.pdf
11) Miles Hatfield, "The Coronal Veil: Are the Sun's Magnetic Arches an Optical Illusion?," NASA Feature, 16 June 2022, URL: https://www.nasa.gov/feature/goddard/2022/sun/coronal-veil-are-sun-magnetic-arches-an-optical-illusion
12) A. Malanushenko, M. C. M. Cheung, C. E. DeForest, J. A. Klimchuk, and M. Rempe, "The Coronal Veil," The Astrophysical Journal, Volume 927, Number 1," Published: 1 March 2022, https://doi.org/10.3847/1538-4357/ac3df9, URL: https://iopscience.iop.org/article/10.3847/1538-4357/ac3df9/pdf
13) "Strong Solar Flare Erupts from Sun," NASA Solar Cycle 25, 10 May 2022, URL: https://blogs.nasa.gov/solarcycle25/2022/05/10/strong-solar-flare-erupts-from-sun-2/
14) "Sun Releases Moderate and Strong Solar Flares," NASA Solar Cycle 25, 20 April 2022, URL: https://blogs.nasa.gov/solarcycle25/2022/04/20/sun-releases-mid-level-solar-flare/
15) Denise Hill, "Mid-Level Solar Flare Erupts From Sun," NASA Solar Cycle 25, 31 March 2022, URL: https://blogs.nasa.gov/solarcycle25/2022/03/31/mid-level-solar-flare-erupts-from-sun/
16) Lina Tran, "Sun Releases Significant Solar Flare," NASA Solar Cycle 25, 28 October 2021, URL: https://blogs.nasa.gov/solarcycle25/2021/10/28/sun-releases-significant-solar-flare/
17) Susannah Darling, "Artificial Intelligence Helps Improve NASA's Eyes on the Sun," NASA, 23 July 2021, URL: https://www.nasa.gov/feature/goddard/2021/artificial-intelligence-helps-improve-nasa-s-eyes-on-the-sun
18) Luiz F. G. Dos Santos, Souvik Bose, Valentina Salvatelli, Brad Neuberg, Mark C. M. Cheung, Miho Janvier, Meng Jin, Yarin Gal, Paul Boerner and Atılım Güneş Baydin,"Multichannel autocalibration for the Atmospheric Imaging Assembly using machine learning," Astronomy & Astrophysics, Volume 648, 13 April 2021, https://doi.org/10.1051/0004-6361/202040051
19) "New method predicts 'stealth' solar storms before they wreak geomagnetic havoc on Earth," EurekAlert Research News, 20 July 2021, URL: https://eurekalert.org/pub_releases/2021-07/f-nmp072021.php
20) Erika Palmerio, Nariaki V. Nitta, Tamitha Mulligan, Marilena Mierla, Jennifer O'Kane, Ian G. Richardson, Suvadip Sinha, Nandita Srivastava, Stephanie L. Yardley and Andrei N. Zhukov, "Investigating Remote-Sensing Techniques to Reveal Stealth Coronal Mass Ejections, Frontiers in Astronomy and Space Sciences, 05 July 2021, https://doi.org/10.3389/fspas.2021.695966
21) Mara Johnson-Groh, Miles Hatfield, "Rosetta Stone Eruption on the Sun Could Help Explain Solar Explosions," NASA Feature, 7 June 2021, URL: https://www.nasa.gov/feature/goddard/2021/rosetta-stone-eruption-on-the-sun-could-help-explain-solar-explosions
22) Miles Hatfield, "In First, Scientists Trace Fastest Solar Particles to Their Roots on the Sun," NASA Feature, 10 March 2021, URL: https://www.nasa.gov/feature/goddard/2021/in-first-scientists-trace-fastest-solar-particles-to-their-roots-on-the-sun
23) David H. Brooks, and Stephanie L. Yardley, "The source of the major solar energetic particle events from super active region 11944," Science Advances, 03 March 2021, Vol. 7, no. 10, eabf0068, https://doi.org/10.1126/sciadv.abf0068
24) Sarah Frazier, "Exploring the Solar Wind With A New View of Small Sun Structures," NASA Feature, 19 January 2021, URL: https://www.nasa.gov/feature/goddard/2021/exploring-the-solar-wind-with-a-new-view-of-small-sun-structures
25) Mara Johnson-Groh, "The U.S. Postal Service to Issue NASA Sun Science Forever Stamps," NASA Feature, 15 January 2021, URL: https://www.nasa.gov/feature/goddard/2021/the-us-postal-service-to-issue-nasa-sun-science-forever-stamps
26) Mara Johnson-Groh, "Secrets Behind Sunquakes Could Lurk Beneath the Solar Surface," NASA Feature, 4 January 2021, URL: https://www.nasa.gov/goddard/2021/feature/secrets-behind-sunquakes-could-lurk-beneath-the-solar-surface
27) Charles Lindsey, J. C. Buitrago-Casas, Juan Carlos Martínez Oliveros, Douglas Braun, Angel D. Martínez, Valeria Quintero Ortega, Benjamín Calvo-Mozo, and Alina-Catalina Donea, "Submerged Sources of Transient Acoustic Emission from Solar Flares," The Astrophysical Journal Letters, Volume 901, Number 1, Published: 20 September 2020, https://doi.org/10.3847/2041-8213/abad2a, URL: https://iopscience.iop.org/article/10.3847/2041-8213/abad2a/pdf
28) Robert Sanders, "Can ripples on the sun help predict solar flares?," Berkeley News, 21 September 2020, URL: https://news.berkeley.edu/2020/09/21/can-ripples-on-the-sun-help-predict-solar-flares/
29) Charles Lindsey, J. C. Buitrago-Casas, Juan Carlos Martínez Oliveros, Douglas Braun, Angel D. Martínez, Valeria Quintero Ortega, Benjamín Calvo-Mozo, and Alina-Catalina Donea, "Submerged Sources of Transient Acoustic Emission from Solar Flares," The Astrophysical Journal Letters, Volume 901, Number 1, Published: 21 September 2020, https://doi.org/10.3847/2041-8213/abad2a, URL: https://iopscience.iop.org/article/10.3847/2041-8213/abad2a/pdf
30) Angel D. Martínez, Valeria Quintero Ortega, J. C. Buitrago-Casas, Juan Carlos Martínez Oliveros, Benjamín Calvo-Mozo, and Charles Lindsey, "Ultra-impulsive Solar Flare Seismology," The Astrophysical Journal Letters, Volume 895, Number 1, 22 May 2020, https://doi.org/10.3847/2041-8213/ab9173
31) Grey Hautaluoma, Karen Fox, Maureen O'Leary, John Leslie, Petra Vanlommel, "Solar Cycle 25 Is Here. NASA, NOAA Scientists Explain What That Means," NASA Space Weather, 15 September 2020, URL: https://www.nasa.gov/press-release/solar-cycle-25-is-here-nasa-noaa-scientists-explain-what-that-means/
32) "Research team develops the first physics-based method for predicting large solar flares," Nagoya University, 18 August 2020, URL: http://en.nagoya-u.ac.jp/research/activities/news/2020/08/research-team-develops-the-first-physics-based-method-for-predicting-large-solar-flares.html
33) Kanya Kusano, Tomoya Iju, Yumi Bamba, Satoshi Inoue, "A physics-based method that can predict imminent large solar flares," Science, Volume 31, Issue 6503, pp: 587-591, https://doi.org/10.1126/science.aaz2511, Published: 31 July 2020
34) Jesse Jenkins, "Researchers Offer Unprecedented Look Into 'Central Engine' Powering a Solar Flare," NJIT, 28 July 2020, URL: https://news.njit.edu/researchers-offer-unprecedented-look-central-engine-powering-solar-flare
35) Bin Chen, Chengcai Shen, Dale E. Gary, Katharine K. Reeves, Gregory D. Fleishman, Sijie Yu, Fan Guo, Säm Krucker, Jun Lin, Gelu M. Nita & Xiangliang Kong, "Measurement of magnetic field and relativistic electrons along a solar flare current sheet," Nature Astronomy Letter, Published: 27 July 2020, https://doi.org/10.1038/s41550-020-1147-7
36) Tony Phillips, "Solar Dynamics Observatory: The Variable Sun Mission," Feb. 5, 2010, URL: http://science.nasa.gov/science-news/science-at-nasa/2010/05feb_sdo/
37) "Lockheed Martin-Built Instruments See First Light On SDO," SpaceDaily, April 23, 2010, URL: http://www.spacedaily.com/reports/Lockheed_Martin_Built_Instruments_See_First_Light_On_SDO_999.html
39) "Helioseismic and Magnetic Imager for Solar Dynamics Observatory," Joint Assembly Meeting of AGU, SEG, NABS, and SPD/AAS (Solar Physics Division/American Astronomical Society), May 23-27, 2005, New Orleans, LA, URL: http://hmi.stanford.edu/papers/AGU-SPD_May05_HMI_summary2.pdf
40) Jesper Schou and the HMI Team, "The Helioseismic and Magnetic Imager Instrument," LWS (Living With a Star) Meeting, March 23-26, 2004, Boulder, CO, URL: http://lasp.colorado.edu/sdo/meetings/session_1_2_3/posters/session1/1_14P_schou.pdf
41) J. Borrero, S. Tomczyk, A. Norton, T. Darnell, J. Schou, P. Scherrer, R. Bush, Y. Liu, " Magnetic Field Vector Retrieval With the Helioseismic and Magnetic Imager," Solar Physics, Vol. 240, No 1, January 2007, pp. 177-196
42) Philip Scherrer, "Helioseismic and Magnetic Imager," LWS-SDO Workshop, March 23-26, 2004, URL: http://lasp.colorado.edu/sdo/meetings/session_1_2_3/presentations/session1/1_03_Scherrer.pdf
43) N. Waltham, S. Beardsley, M. Clapp, J. Lang, P. Jerram, P. Pool, G. Auker, D. Morris, D. Duncan, "Systems approach to the design of the CCD sensors and camera electronics for the AIA and HMI instruments on Solar Dynamics Observatory," ICSO 2010 (International Conference on Space Optics), Rhodes Island, Greece, Oct. 4-8, 2010
44) G. Card, T. Darnell, D. Elmore, S. Tomczyk, "Helioseismic and Magnetic Imager Polarization Calibration Unit (PCU) Specifications & Operation," HMI Project Document # HMI01560, Rev. A, Nov. 10, 2005
45) http://aia.lmsal.com/public/instrument.htm#des
46) A. Title, "Atmospheric Imaging Assembly Investigation Overview," URL: http://lasp.colorado.edu/sdo/meetings/session_1_2_3/presentations/session1/1_04_Title.pdf
47) http://lasp.colorado.edu/eve/
48) T. Woods, "SDO EUV Variability Experiment (EVE) Introduction," EVE Science Workshop 2, Nov. 9-11, 2005, URL: http://lasp.colorado.edu/eve_workshop/2005/presentations_pdf/Woods_SDO_EVE_Introduction.pdf
49) T. Woods, "The EUV Variability Experiment (EVE) for the NASA Solar Dynamics Observatory (SDO)," March 2004, http://lasp.colorado.edu/sdo/meetings/session_1_2_3/presentations/session1/1_02_Woods.pdf
50) F. G. Eparvier, T. N. Woods, D. Judge, A. R. Jones, D. L. Woodraska, "SDO-EVE: Providing Solar EUV Irradiance Measurements for LWS," American Geophysical Union, Spring Meeting 2005, New Orleans, LA, May 23-27, 2005
51) H. Tann, C. J. Silva, R. J. Pages, "Ground System for the Solar Dynamics Observatory (SDO) Mission," Georgia Tech Space Systems Engineering Conference, Atlanta, GA, Nov. 8-10, 2005, paper No: GT-SSEC.C.5
Spacecraft Launch Mission Status Sensor Complement Ground Segment References Back to top