COORAGE Battery Pack
COORAGE Battery PackReferences
July 2022: Harder than diamond and more electrically conductive than copper while also a million times thinner than paper: graphene is the single greatest discovery of 21st century materials science, and ESA has been working to benefit from its miraculous properties. A project to add ultra-thin graphene to traditional Lithium ion cells offers enhanced capacity and cycle life for future space batteries, which can now be manufactured in a cheaper, greener way – swapping toxic solvent for water and plant-based cellulose. 1)
“As the world is transitioning from fossil fuel power to emission-free electrification, energy storage devices such as batteries are becoming a critical part of the value chain of this new ‘green’ economy,” explains Athanasios Masouras of Greece-based Pleione Energy.
Figure 1: Atom-thick graphene layer. Graphene is made out of a single layer of graphite, a hexagonal lattice of carbon atoms, so thin that it is transparent, and essentially two-dimensional (image credit: Wikimedia Commons/Mohammad Javad Kiani, Fauzan Khairi Che Harun, Mohammad Taghi Ahmadi, Meisam Rahmani, Mahdi Saeidmanesh, Moslem Zare)
“To satisfy increased demand for higher power density and fast charging batteries means turning to novel materials, because existing solutions are coming up against hard performance limits.”
The company worked with ESA on a project to industrialize the production of Li-ion battery electrodes incorporating graphene as their main active material, producing in the tens of meters at a time. These negative electrodes were used for Li-ion battery cells that were produced and tested according to European Cooperation for Space Standardization (ECSS) standards, representing space-ready quality.
“The challenge was to scale up from lab activities to industrial production, with the potential to make kilometers of electrode at a time,” comments ESA materials specialist Ugo Lafont.
“Our breadboard cell shows good properties, producing 12.5 Ah of energy, offering a European way to improve battery capacity and improve key electrochemical characteristics. In particular the nano-size of the graphene ensures enhanced mobility of the lithium ions at the heart of the system, leading to improved capacity for the same amount of material and higher charging and discharging rates without degrading the system. The potential is there for new cheap but reliable batteries suited for small satellites and CubeSats in particular.”
Figure 2: Graphene powder for use as the main active material in Lithium-ion batteries in ESA's COORAGE project (image credit: Pleione Energy)
Athanasios notes: “Having completed the battery cells and integrated them in a battery pack, the real test came when we exposed it to the temperature profile of a typical low-Earth orbit mission, which means frequent changes from high-temperature sunlight to cold darkness. But our testing confirmed we have succeeded in increasing the specific capacitance of the anode of the battery compared to traditional graphite, and in developing electrodes that maintain their performance in high current densities – making them suitable for fast charge/discharge applications.
“Overall graphene offers around 20% higher specific capacitance than graphite, while its endurance of higher current densities should mean higher cycle life for batteries, safer operation due to lower temperature and an overall reduction in material consumption, and therefore cost.”
The Cost-Effective Graphene Energy Storage project, COORAGE, was undertaken by Pleione Energy and Germany's Fraunhofer Institute for Silicate Research to devise an end-to-end industrial process for electrode production, with Omnidea-RTG in Germany designing the project’s breadboard battery cells.
“The process itself isn’t revolutionary,” Ugo adds. “The real step forward is in the way the graphene is added. Electrodes always need a metallic current collectors that collect the current and connect to external circuits. These positive and negative collectors have active materials attached to them, which come in the form of powders, so they need to be laminated and glued to their current collector – like turning flour into pancake dough you can cook with.
Figure 3: Roll-to-roll process. Pleione Energy and the Fraunhofer Institute for Silicate Research worked with ESA on a project to industrialise the production of Li-ion battery electrodes incorporating graphene as their main active material, produced in tens of metres at a time (image credit: Pleione Energy)
“So this powder is turned into a slurry to be painted onto the current collector, binding it in place for intimate contact that allows electrons to flow. But in the past this process required expensive and highly toxic solvents. We have switched to water as a solvent mixed with cellulose nanocrystals taken from plant biomass, which is a hundred times cheaper. There is also certain proprietary knowledge involved, like the skill of a chef ensuring your food tastes good!”
Athanasios adds: “As well as reducing the overall environmental footprint of the process, removing these solvents – which are costly both to purchase and to handle – significantly reduces manufacturing costs by around 20% and makes battery production more compliant with the strictest EU environmental standards.”
The COORAGE project, supported through ESA’s General Support Technology Program (GSTP) preparing promising products for space and the marketplace, is also investigating the harnessing of graphene for Li-ion supercapacitors, which are power storage devices capable of delivering brief high-speed bursts of very high power.
Figure 4: Testing the battery pack. Harder than diamond and more electrically conductive than copper while also a million times thinner than paper: graphene is the single greatest discovery of 21st century materials science, and ESA has been working to benefit from its miraculous properties. A project to add ultra-thin graphene to traditional Lithium ion cells offers enhanced capacity and cycle life for future space batteries, which can now be manufactured in a cheaper, greener way – swapping toxic solvent for water and plant-based cellulose (image credit: Pleione Energy)
Figure 5: The COORAGE battery pack. Breadboard battery pack produced through ESA's Cost-Effective Graphene Energy Storage project, COORAGE, to further improve and validate the capabilities and advantages of the developed Graphene-based anode electrodes at system level by designing, manufacturing, and testing a prototype high performance graphene-based lithium battery cell (Pleione Energy)
“Our next step will be to transfer our technology to cylindrical standardized cells, then increase its technology readiness level through extensive testing, with our ultimate target being to qualify for spaceflight,” notes Athanasios.
“We’re grateful for having had the chance to work with ESA, which has been essential to reach our goals. For small-medium enterprises, working with GSTP and similar ESA programs is a critical resource for bringing technologies closer to space, by providing a space mindset from a project’s earliest stages.”
Figure 6: CubeSats in space (image credit: ESA)
1) ”Just add graphene for greener Li-ion batteries,” ESA Enabling & Support, 7 July 2022, URL: https://www.esa.int/Enabling_Support/Space_Engineering_Technology/Just_add_graphene_for_greener_Li-ion_batteries
The information compiled and edited in this article was provided by Herbert J. Kramer from his documentation of: ”Observation of the Earth and Its Environment: Survey of Missions and Sensors” (Springer Verlag) as well as many other sources after the publication of the 4th edition in 2002. - Comments and corrections to this article are always welcome for further updates (firstname.lastname@example.org).
References Back to top