Deimos-2 is a continuation of the Deimos-1 mission by the Spanish company Elecnor providing high-resolution Earth observation imagery. The satellite functions as a multi-purpose land imager that has specific applications in the measurement of land processes such as biomass, land cover and vegetation properties. Launched in June 2019, Deimos-2 has a nominal mission lifetime of seven years with a goal to be operational for a total of ten years. In 2021, the company GEOSAT acquired Deimos-1 & 2, and renamed them to GEOSAT-1 & 2, respectively.
|Launch date||16 Sep 2014|
|End of life date||Sep 2029|
|CEOS EO Handbook||See Deimos-2/GeoSat-2 summary|
The central instrument for the GeoSat-2 mission is the High Resolution Advanced Imaging System (HiRAS) which is a pushbroom type imager that conducts vegetation measurements in Fraction of Absorbed Photosynthetically Active Radiation (FAPAR), Leaf Area Index (LAI) and Normalised Difference Vegetation Index (NDVI). The instrument contains three elements: the Electro-optical Subsystem (EOS), the Solid-State Recorder Unit (SSRU), and the Image Transmission Unit (ITU) which collectively function to image, record and transmit image data, respectively. The optical payload has one panchromatic band and four multispectral bands in red, green, blue and near-infrared.
The High Resolution Advanced Imaging System (HiRAS) instrument has five spectral bands: one panchromatic band (450-900 nm), one blue multispectral band (420 - 510 nm), one green multispectral band (510 - 580 nm), one red multispectral band (600 - 720 nm), and one near-infrared band (NIR) (760 - 890 nm). The instrument has an aperture of 0.42 m in diameter, a focal length of 5.75 m, and a field of view of 1.2°. The swath width is 12 km at nadir and 24 km in wide area mode, with a resolution of 1 m for panchromatic imagery and 4 m for the four multispectral bands.
GeoSat-2 is in a sun-synchronous near-circular orbit at an altitude of 630km and an inclination of 98°. The satellite provides a 4-day revisit time that is enabled by the ±45° maximum off-nadir pointing capability.
Space & Hardware Components
GeoSat-2 contains a ground segment that is based on the Ground Segment for Earth Observation (gs4EO) product line. The gs4EO software package is responsible for the customisation of the ground segment operations. This software allows GeoSat-2 to function as a collective segment that ensures the maintenance, accuracy and transmission of image data for end-users. There are also numerous other software packages included in the 4EO software suite that enables the Demios-2 mission to function: User4EO, Plan4EO, Fly4EO, Control4EO, Track4EO, Archive4EO, Process4EO, Monitor4EO and CalVal4EO.
The GeoSat-2 mission also utilises Decentralised Repositories for Transparent and Efficient Virtual Machine Operations (ENTICE) that function as data processing and distribution infrastructure for Earth Observation imaging data.
GeoSat-2, previously known as Deimos-2, is a follow-on imaging mission of Deimos-1 Imaging S. L. U., an Elecnor company of Boecillo, Spain. The GeoSat-2 mission is aimed at operating an agile minisatellite for high-resolution EO (Earth Observation) applications. The agile spacecraft can be steered to accurately point the pushbroom-type optical payload, which can provide 1 m panchromatic and 4 m multispectral images in a swath of 12 km at nadir, at an orbit altitude of ~600 km. The multispectral capability includes 4 channels in the visible and near-infrared spectral range (red, green, blue and NIR). 1) 2) 3) 4) 5) 6)
The off-nadir tilting capability of the S/C is intended to improve the revisit time performance and enhance the operational flexibility by significantly reducing the time interval to take images on areas of interest. While the across-track tilt angle for nominal image acquisitions is ±30º, the satellite can be configured to achieve ±45º off-nadir pointing capability, i.e., an extended FOR (Field of Regard) for data collection with short revisit times in emergency situations. Moreover, high-quality observations can be performed close to nadir (small FOR) to enable background mapping.
A contract between Deimos Imaging Inc. of Valladolid, Spain and SI (Satrec Initiative) of Daejeon, Korea was signed in November 2010. The satellite and its payload are being designed and developed by SI. According to agreements, the spacecraft will be integrated and tested in Spain in collaboration with SI, in the new Elecnor Deimos Satellite Systems premises at Boecillo near Madrid. Deimos Satellite Systems is responsible for system engineering, procurement, testing, integration, launcher procurement, commissioning, in-flight acceptance, and operations of the system.
The project PDR (Preliminary Design Review) was in May 2011. The CDR (Critical Design Review) was completed in June of 2012.
The spacecraft bus is designed to fulfil all mission requirements by incorporating 3-axis stabilized, accurate and agile attitude control for precise imaging operations. The satellite attitude is based on the following main nominal operations modes (Ref. 1):
• Housekeeping sun-pointing mode in sunlight: During the sunlight stage, the spacecraft attitude shall be maintained or steered so that the solar panels are always pointing towards the sun for maximum power generation. When the spacecraft is in sunlight, the camera points in the direction opposite to the sun, unless it is in observation mode.
• Housekeeping nadir-pointing mode in eclipse: The S/C shall point towards the Earth during eclipse to minimize the usage of payload heaters. When the S/C is in eclipse, the camera points in the nadir direction.
• EO modes: The platform agility is exploited to take images not only close to nadir, but also with up to ±45º into any direction (cross-track or ±30º along-track). This allows single-strip imaging of areas of interest, multi-pointing imaging of close-enough targets, single-pass stereo imaging by along-track pitch angle maneuvers and tessellation imaging.
Note: In geometrical terminology a tessellation is the pattern resulting from the arrangement of regular polygons to cover a plane without any interstices (gaps) or overlapping. The patterns are usually repeating.
• Data download operation mode: When the link with a GS (Ground Station) can be set up, the S/C shall maneuver to point to the GS with maximum solar power generation. At the same time, the X-band antenna gimbal shall be steered towards the GS antenna to provide the needed gain. Consecutive image download operations are foreseen if the single-GS pass duration is not sufficient for data download and the following GS visibility interval is very close to the previous one.
• Orbit maintenance and control operation mode: In-plane and out-of-plane orbit maneuvers are enabled by setting firing attitude parameters.
Spacecraft: The Deimos-2 spacecraft is identical to the DubaiSat-1 minisatellite (launched on Nov. 21, 2013) except for a battery capacity to account for a longer life. The nominal mission lifetime shall be 7 years, with a goal of 10 years. 7) 8) 9)
Deimos-2 features the SpaceEye-1 platform of SI (Satrec Initiative), a 300 kg class minisatellite bus (also referred to as SI-300). The SI-300 bus is of DubaiSat-2 heritage. Its architecture is designed to accommodate an Earth observation and/or science payload. The HEPS (Hall Effect Propulsion System) is installed for orbit control and maintenance. Accurate and agile three-axis attitude control supports precise imaging operations. Dual redundancies are adapted where necessary in the system architecture design to increase reliability of the satellite system.
The SI-300 platform, whose size is 1.5 m in diameter and 1.95 m in height, features a deck-and-longeron type structure permitting easy assembly and disassembly. A Li-ion battery and four deployable solar panels are equipped for power supply. The interface with the launch vehicle is made through an adapter bolted to the bottom of the structure.
Spacecraft launch mass
Ø 1,500 x 1,940 mm height
Pointing error: 0.15º (3σ)
±45º pointing in cross-track (max)
High-performance AOCS for pointing accuracy & stability
OBC (On-Board Computer)
LEON3 FT, with VxWorks OS
Fully redundant, cross-strapped C&DH, 2 CAN busses (500 kbit/s each, redundant)
450 W @ EOL
4 GaAs solar panels
GSD (Ground Sample Distance)
1 m (PAN), ~ 4 m (MS)
@ 600 km altitude, nadir view
> 12 km
PAN + 4 MS
PAN + RGB, NIR
S-band (32 kbit/s in up- and downlink)
Telemetry, telecommand & tracking, CCSDS protocol, PTD chip, authenticated commands and encrypted TLM
X-band with 160 Mbit/s downlink rate
On-board recording capability
Equivalent to 1400 km observation strip
> 10 mN of thrust, > 1000 s of Isp, 3 kg of Xenon
Orbit control and maintenance
TCS (Thermal Control Subsystem)
Passive and and thermal control
5 operational heaters+2 survival heaters; dedicated temperature sensors, uniform distribution
AOCS (Attitude and Orbit Control Subsystem): The AOCS provides satellite pointing capability for single-strip, multi-strip and single-pass stereo imaging. Five reaction wheels are used for attitude control along with four Fiber Optic Gyros. Attitude data is provided by Star Trackers for fine-pointing and magnetometers and sun sensors for coarse pointing in safe and acquisition mode. Deimos-2 has a pointing accuracy of 0.03º on all axes. A key-feature of the satellite is a high-agility to allow fast body-pointing of up to 45º off nadir, however, during nominal operations off-nadir angles of up to 30º will be used.
Propulsion subsystem: A HEPS (Hall Effect Propulsion System) is used for orbit maintenance and orbit adjustments. It uses electric propulsion utilizing Xenon gas and a microwave cathode. HEPS consists of a XFU (Xenon Fuel Unit), THU (Thruster Head Unit), PPU (Power Processing Unit) and the MCU (Microwave Cathode Unit). The XFU holds about 2 kg of Xenon fuel that is held at a pressure of 150 bar. Via pressure valves and orifices, Xenon is allowed to flow into two smaller tanks, each at 3 bar for the anode and cathode. The thruster head includes magnets for ion motion detection while the PPU provides the different voltages for the HEPS system to accelerate generated Xenon ions to high velocity for ejection. The HEPS provides 7 mN of thrust consuming about 300 W of power.
C&DHS (Command and Data Handling Subsystem): The C&DHS handles all telecommands sent to the satellite and collects all telemetry from the satellite's subsystems. Two CAN networks with data rates of 500 kbit/s are using a series of Interface Boards to connect all satellite modules to the networks. The Interface Boards are in charge of formatting telemetry data and handling messages received from the main computer. The Actuator Interface Board controls the speed of the reaction wheels and provides a speed feedback to the computers.
RF communications: The TT&C data are transmitted in S-band. The payload imagery is transmitted in X-band at a data rate of 160 Mbit/s (QPSK modulation). The imagery is stored on a high-capacity solid-state recorder (256 Gbit). The recorder compresses, encrypts and encodes the data in real-time during transmission (lossless compression of image data). CCSDS encoding during transmission. The X-band antenna is steerable in one axis in the range of ±90º. Two telemetry and telecommand boards are operated in hot-redundancy to perform all telecommand decoding and telemetry encoding directly interfacing with the S-Band system that is used for command uplink and telemetry downlink.
The Deimos-2 minisatellite (310 kg) was launched on June 19, 2014 (19:11:11 UTC) on a Dnepr-1 vehicle of ISC Kosmotras. The launch site was the Yasny Cosmodrome in the Dombarovsky region of Russia. 10) 11) 12) 13)
Another primary payload on the flight is KazEOSat-2, an imaging minisatellite (185 kg) of KGS (Kazakhstan Gharysh Sapary), Astana, Kazakhstan.
The secondary payloads (35) on this Dnepr cluster mission were: 14)
• UNISat-6, a microsatellite of GAUSS at the University of Rome (La Sapienza), Italy. UniSat-6 (26 kg) includes Pico-Orbital Deployers and PEPPODs (Planted Elementary Platform for Picosatellite Orbital Deployment) systems for the release of four CubeSats from the spacecraft. These four satellites are:
- Lemur-1, a 3U CubeSat (technology demonstration and EO) of NanoSatisfi Inc., San Francisco, CA, USA
- TigriSat, a 3U CubeSat of the University of Rome (La Sapienza), Rome, Italy.
- ANTELSAT, a 2U CubeSat of UdelaR (University of the Republic), San Marino, Uruguay
- AeroCube-6, a 1U CubeSat of The Aerospace Corporation, El Segundo, CA.
• SaudiSat-4 a microsatellite (112 kg) of KACST (King Abdulaziz City for Science and Technology) with input from NASA/ARC.
• AprizeSat-9 and -10, nanosatellites (each of 12 kg) of SpaceQuest, USA. AprizeSat-10 carries an AIS (Automatic Identification System) receiver for ship tracking.
• Hodoyoshi-3 and -4, microsatellites (60 kg and 65 kg) of the University of Tokyo and of JAXA/ISAS, Japan
• BRITE-CA-1 and BRITE-CA-2, two nanosatellites (7 kg each) of UTIAS/SFL (University of Toronto, Institute for Aerospace Studies), Toronto, Canada
• TabletSat-Aurora, a microsatellite (25 kg) of SPUTNIX, Russia
• BugSat-1, a microsatellite (22 kg) of Satellogic S.A., Argentina
• Perseus-M1 and M2, two identical 6U CubeSats of Canopus Systems US / Dauria Aerospace. The nanosatellites are carrying an AIS payload for ship tracking.
• QB50P1 and QB50P2, two 2U CubeSats (2 kg each) of Von Karman Institute, Brussels, Belgium. These are two precursor satellites to the QB50 project that will launch a network of 50 satellites by a team of 15 universities and institutions around the world.
• NanoSatC-Br1, a 1U CubeSat of the Southern Regional Space Research Center and of INPE, Brazil
• DTUSat-2, a 1U CubeSat of DTU (Technical University of Denmark), Lyngby, Denmark
• POPSat-HIP-1, a 3U CubeSat of Microspace Rapid Pte Ltd., Singapore
• PolyITAN-1 of KPI (Kiev Polytechnic Institute), Kiev, Ukraine
• PACE (Platform for Attitude Control Experiments), a 2U CubeSat (2 kg) of NCKU (National Cheng Kung University), Tainan City, Taiwan
• Duchifat-1, a 1U CubeSat of HSC (Herzliya Science Center), Israel
• 11 Flock-1c nanosatellites (eleven 3U CubeSats, 5 kg each) of Planet Labs, San Francisco, CA.
Orbit: Sun-synchronous near-circular orbit, nominal altitude of 630 km, inclination of 98º, nominal LTAN (Local Time of Ascending Node) at 10:30 hours. Ultimately, a 4-day revisit time performance of Deimos-2 is enabled by the ±45º maximum off-nadir pointing capability.
• May 16, 2018: UrtheCast Corp. and its subsidiary, the Earth Observation company Deimos Imaging SLU ("Deimos Imaging"), will be supplying Earth Observation products and services from the Deimos-2 satellite, during an initial period of three years that could be extended up to five years per a contract with the Brazilian Ministry of Defence's Aeronautics Command (COMAER) that exceeds $2.6 million U.S. dollars. 15)
- Jamie Ritchie, Chief Commercial Officer at Deimos Imaging stated that they are very excited and proud to deliver their best-in-class services to the Brazilian Ministry of Defence for the first time. The award of this contract reinforces their increasing role as key provider of imagery and geoinformation products worldwide.
• February 2018: The Deimos-2 satellite of Deimos Imaging captured the sites of the Winter Olympics in PyeongChang, South Korea. 16)
Legend to Figure 6: The Gangneung Olympic Park, a sports complex area, location of the Gangneung Hockey Center, the Gangneung Curling Center, the Gangneung Oval, for speed skating, and the Gangneung Ice Arena, for short track speed skating and figure skating.
• December 21,2017: UrtheCast Corp. of Vancouver, Canada, and its subsidiary, the Earth Observation company Deimos Imaging of Spain, today announced the signing of an agreement with SIIS (SI Imaging Services) of Daejeon, Korea, a leading provider of remote sensing satellite data and exclusive worldwide marketing and sales representative of the KOMPSAT (Korea Multi-Purpose Satellite) program series of KARI (Korea Aerospace Research Institute), for the mutual global distribution of their respective product portfolios. 17) 18)
- The space assets of Deimos Imaging and SIIS include Deimos-1, Deimos-2 and the KOMPSAT series KOMPSAT-2, KOMPSAT-3, KOMPSAT-3A and KOMPSAT-5, resulting in a wide portfolio of X-band SAR and optical data in a wide range of resolutions, from 22 m to 0.4 m per pixel.
- The combination of radar with very high-resolution optical imagery will allow observation of the Earth day and night, regardless of weather conditions, and is intended to provide a constant asset monitoring service. This is key for a wide range of applications, especially those requiring frequent monitoring over the same area of interest and real-time response, such as emergency services, border and maritime surveillance and defence and security.
- Additionally, this collaboration is expected to provide customers with an exceptional level of decision making data, and to create a unique and crucial benefit for users in various sectors while strengthening the positions of both companies in their respective markets.
- "We are delighted to be an authorized distributor for Deimos Imaging," said Mr. Wookhyun Choi, Vice President at SIIS. "This is a great opportunity to broaden our reach and widen our geospatial data distribution options, as we are introducing Deimos Imaging's imagery to our resellers while presenting KOMPSAT to their networks. This will allow us to provide our customers with more precise answers to their needs."
- "We are very pleased to be partnering with SIIS as this collaboration supports and strengthens our data strategy to meet a growing range of customer needs by providing them with fast, customized and ready-to-use solutions", said Fabrizio Pirondini, CEO at Deimos Imaging. "This agreement confirms the importance of partnerships and alliances with other stakeholders to significantly accelerate decision making in a great variety of fields. In addition, this joint service increases our portfolio of sensors and our market reach with new geo-intelligence products thanks to the combination of SAR and very high resolution optical data."
- The assets of SIIS now combine with the recent strategic partners aligned with Deimos Imaging, resulting in a multi satellite, multi resolution virtual constellation, to deliver imagery services and geo-analytic applications to customers globally. These strong partnerships are designed as 'win-win' to secure the success and sustainability of all the partners involved in the ever developing and growing Earth Observation industry.
• May 12, 2016: It's been one month since a 7.8-magnitude earthquake devastated parts of Ecuador on April 16, 2016, impacting the lives of thousands of civilians. It's the largest recorded quake that Ecuador has experienced since 1979 — a tragic situation made worse by a lack of financial support, which has fallen short of the government's need for $72.7 million in aid, as reported by the UN. 20)
- The areas hardest hit included Muisne, Pedernales, and Jama, among others. Integral to the management of the UN's humanitarian efforts is satellite imagery, from a variety of satellite sources.
- As a part of its humanitarian program and ongoing partnership with UrtheCast, the United Nations UNOSAT program (a division of UNITAR) used satellite imagery — including this UrtheCast Deimos-2 imagery captured on April 19, 2016 — to conduct its preliminary analysis of the affected areas.
- This Deimos-2 imagery data, focused around the area of Portoviejo City, in the Manabi Province, was released by the UN on April 27, 2016. The analysis, which you can review here, also leveraged Pleiades data and WorldView-2 imagery captured back in July of 2014.
- With these datasets, UNOSAT was able to swiftly detect potentially damaged structures, in a preliminary analysis that yielded the following results for Portoviejo, as of April 27, 2016:
- 437 potentially damaged structures
- 87 destroyed structures
- 83 severely damaged
- 267 moderately damaged structures.
- The area of the city most impacted by the quake was the downtown core, shown at the very center of Figure 12.
The human toll:
A total of 280 Ecuadorian schools were damaged by the quake leaving 120,000 children temporarily without education, stated a UNICEF report issued on April 27.
"Education is a lifeline for children going through the trauma of chaos and destruction,"explained Grant Leaity, a UNICEF representative based in Ecuador. "It helps give them a daily routine and a sense of purpose and puts them on track for psychological recovery."
In efforts to lessen the impact, UNICEF committed to providing 50 temporary learning spaces for 20,000 kids, 700 school-in-a-box kits, and school supplies for 60,000 children.
One week later, on May 6, the UN reported that Ecuador's death toll had reached 660 lives lost, with 23 people still missing. The fallout from April's tragic quake is expected to keep taking its toll on the people of Ecuador, especially in the wake of lower-than-expected levels of financial support.
• The Deimos-2 spacecraft and its payload are operating nominally in 2016.
• Deimos-2 acquired the image of Figure 13 in early December 2015. The 21st session of the COP 21 (Conference of the Parties) to the UNFCCC (United Nations Framework Convention on Climate Change) took place in December 2015, in Paris, France.
• July 15, 2015: The UrtheCast Corporation today acquired the Earth Observation business Deimos Imaging from Elecnor, S.A. (Spain) for an aggregate price of €76.4 million. In addition to ownership and operation of the Deimos-1 and Deimos-2 satellites, UrtheCast has acquired satellite operations related to the collection, storage, processing, analysis, distribution, and licensing of imagery captured by these and other satellites. The combination of UrtheCast and Deimos operations is expected to significantly accelerate UrtheCast's strategies related to distribution, web platform development, and the building out of the UrtheCast Constellation. 21) 22)
- In conjunction with the Acquisition, UrtheCast has entered into a Mutual Cooperation Agreement with Deimos Space, S.L.U. ("Elecnor Deimos"). This agreement contemplates the participation of Elecnor Deimos as a strategic implementation partner for UrtheCast's planned 16-satellite constellation consisting of both optical and SAR instruments. Elecnor Deimos will join the other strategic partners expected to be involved in UrtheCast's constellation, which includes various Canadian companies expected to build elements of the SAR payload, as well as SSTL (Surrey Satellite Technology Ltd.), UK for the spacecraft platforms and optical payload (Ref. 22).
- Deimos Imaging (Spain), a subsidiary of UrtheCast Corp. (Canada), owns two commercial Earth Observation (EO) missions, Deimos-1 and Deimos-2. Deimos Imaging is in charge of operating both satellites and commercializing their imagery.
• On June 19, 2015, Deimos-2 was 1 year on orbit. The satellite, which is owned by Elecnor and operated by its technological division Elecnor Deimos, has traveled around the Earth approximately 5,300 times during this year. DEIMOS-2 is the first Spanish very-high resolution Earth Observation satellite, producing multispectral images with a resolution of 75 cm per pixel. It is the highest-resolution fully private satellite in Europe, and one of the very few privately-owned submetric satellites in the world. 23)
• May 27, 2015: Deimos Space UK and the MBRSC (Mohammed Bin Rashid Space Center), formerly EIAST, in the UAE (United Arab Emirat) have signed a one-year contract to develop mapping applications that use DubaiSat-2 and Deimos-2 high-resolution satellite data. Typical applications include products and services for agriculture, forestry, disaster monitoring, land use, surveillance and intelligence. 24)
• On April 1, 2015, DEIMOS-2 joined the fleet of Copernicus Contributing Missions in the new Data Warehouse phase of the Copernicus Space Component Data Access (CSCDA), coordinated by ESA (European Space Agency). This initiative is headed by the EC (European Commission) in partnership with ESA. The program is designed to provide accurate, timely and easily accessible information, to improve the management of the environment, understand and mitigate the effects of climate change, ensure civil security and support effective policy-making for a more sustainable future. Copernicus offers a unified system through which vast amounts of data are supplied into a range of thematic information services. These services fall into six main categories: land management, marine environment, atmosphere, emergency response, security and climate change. 25)
• March 23, 2015: The Expo 'Milan Universal Exhibition' takes place during a six-month period from May through October. This year's global showcase of 140 participating countries is focused on "Feeding the Planet," with a goal to "guarantee healthy, safe and efficient food for everyone. The Expo is located about 9 km from center city. 26)
Legend to Figure 14: The 2015 Expo area can mainly be identified by a white stretch of structures shading the main street, the Decumano. On either side of the 1.5 km-long Decumano are the national pavilions of the participating countries.
• The image of Figure 15 was released by ESA on March 13, 2015. It shows São Miguel, Azores observed by the Deimos-2 spacecraft. The circular crater or caldera dominates the image and measures about 5 km across. The interior has lakes, volcanic cones, lava domes and maars – or shallow, flooded craters.27)
- The Lagoa das Sete Cidades – or Lagoon of Seven Cities – is comprised of two ecologically different lakes that are connected by a narrow passage, visible at the center of the image. The lake to the north is known as the Blue Lake while to the one to the south is the Green Lake for the colors they reflect.
- According to the legend, the protected daughter of a king escaped to the surrounding hills, where she met and fell in love with a young shepherd. When the shepherd asked the king for his daughter in marriage, the king refused and forbade his daughter from seeing the boy again. The two met secretly one last time and cried until their tears filled the valleys to form the two lakes: one green as the Princess's eyes were green, and the other blue like the shepherd's eyes.
- In the surrounding area we can see the distinct lines where vegetation grows along waterways radiating from the circular massif. Between these lines are agricultural plots.
On 1 April 2015, Deimos-2 will become a contributing mission to Europe's Copernicus program.
• January 2015: Deimos-2 starts commercial operations: DEIMOS Elecnor declared on November 1, 2014the Deimos-2 IOC (Initial Operational Capability); it is now (Jan. 2015) providing a FOC (Full Operational Capability) commercial service to customers worldwide. 28)
• In November 2014, Elecnor-Deimos declared IOC (Initial Operational Capability) for Deimos-2 and started commercial operations. DEIMOS-2, the first Spanish very-high resolution satellite and the highest-resolution fully private satellite in Europe, was launched last June. It has now successfully completed its in-orbit commissioning and it is entering the operational and commercial phase of its mission. DEIMOS-2 acquires panchromatic and 4-band multispectral images over a 12-km or 24-km swath, producing pan-sharpened or stereo images with a resolution of 75 cm. DEIMOS-2 declared IOC on November 1st, 2014 and will enter Full Operational Capability in January 2015, marking the start of full-fledged, 24/7 commercial service. 29)
• October 2014: EIAST (Emirates Institution for Advanced Science and Technology) and Elecnor Deimos have set up a unique, transnational PPP (Public Private Partnership) to operate the satellites, DubaiSat-2 and Deimos-2 as a constellation, to jointly commercialize the imagery of both satellites, and interchange technical and operational information to increase the efficiency of both systems. 30)
The constellation operations are based on four ground stations: Al Khawaneej (Dubai), Puertollano (Spain), Kiruna (Sweden) and Inuvik (Canada), which assure at least a contact per orbit with each satellite. The constellation functionalities of the ground segment were developed by EIAST and Elecnor Deimos in cooperation, in order to provide a product which is exactly the same, independently of which satellite acquired the image.
- The new constellation is referred to as the PanGeo Alliance, the first global alliance of Earth Observation satellites operators. The alliance was announced at the annual summit on Earth Observation Business, in its sixth edition, in Paris, France (Sept. 11-12, 2014). The PanGeo Alliance currently federates 4 satellite operator entities from around the world: Dauria Aerospace (USA/Russia), EIAST (UAE), Elecnor Deimos (Spain) and Beijing Space Eye Innovation Technology (China). 31) 32) 33)
The PanGeo fleet is composed of 9 satellites currently in orbit: Perseus-M1, Perseus-M2, Dauria-DX-1, DubaiSat-1, DubaiSat-2, Deimos-1, Deimos-2, TH-1-01 and TH-1-02. This fleet will be expanded to more than 30 satellites in the next years with the launch of KhalifaSat, of the Perseus-O and Auriga constellations, and with the expansion of the TH-1 constellation, plus satellites brought into the alliance by prospective new members that may join in the future.
The PanGeo fleet provides multispectral imagery in a wide range of resolutions (from 20 m to 75 cm/ pixel), with a daily global imaging capability. Moreover, it provides AIS data for ship identification and maritime traffic control. All PanGeo Alliance members can provide access to the full satellite fleet and product portfolio from all members.
• June 26, 2014: Following a successful launch on June 19, 2014, the Spanish satellite Deimos-2 has already started to capture and transmit its first images from space. The first two images of this Earth observation satellite relate specifically to the Qatari capital, Doha, and show its avenues and the complex being built there for the Soccer World Cup 2022 (Figures 19 and 20). These images show a high quality and provide significant detail. Since its launch and orbit injection, Deimos-2 has contacted the three ground stations (Puertollano, Kiruna, and Inuvik) on 60 occasions in 5 days, transmitting its data and permitting commanding; all subsystems onboard have been activated and tested. 34) 35)
- The satellite began capturing its first images just 12 hours after its release into orbit, activity has continued along these initial 5 days on orbit. Now, Deimos-2 is in its commissioning phase and will start its calibration activities in the coming days. 36)
- Over the next seven years, the satellite will capture images of 0.75 m per pixel in five bands, which is high-resolution imagery for client applications in various areas such as the environment, civil protection, defense and border control information.
HiRAIS (High Resolution Advanced Imaging System)
HiRAIS is an optical payload, designed and developed by SI (Satrec Initiative) of Daejeon, Korea in collaboration with Elecnor Deimos. The proven design has a significant heritage with DubaiSat-1 and -2 of EIAST (Emirates Institution for Advanced Science and Technology), United Arab Emirates. Dubaisat-2 is an almost exact Deimos-2 twin. The HiRAIS instrument consists of three elements:
• EOS (Electro-Optical Subsystem)
• SSRU (Solid-State Recorder Unit)
• ITU (Image Transmission Unit).
EOS is comprised of the following elements: telescope, ACM (Auxiliary Camera Module), and FPA (Focal Plane Assembly). EOS is a pushbroom type camera with 1 m GSD (Ground Sampling Distance) for a panchromatic imagery and 4 m GSD in four MS (Multispectral) bands (red, green, blue and NIR). The swath width of the generated image is 12 km.
EOS features a Korsch telescope with 5 mirrors. The optical design includes the main mirror (M1) of 415 mm diameter, 3 mirrors to increase the focal length up to 5.7 m, and a flat mirror to reflect light rays onto FPA. Light-weighted Zerodur is used for the mirrors, while CFRP material was used to design the main optomechanical structure of HiRAIS. The temperature balance of the mirror surfaces, the distances between the mirrors and the FPA are all actively controlled by a feedback heating system, which includes thermostats and heaters. Also passive cooling with heat dissipative materials.
Pushbroom type imager
- Korsch telescope of 42 cm aperture diameter (clear aperture of 40 cm diameter)
GSD (Ground Sample Distance)
0.75 m PAN-sharpened, 4 m MS @ 590 km altitude
Pan: 450-900 nm
FPA (Focal Plane Assembly)
CCD detector with TDI capability
TDI detector exposure levels of the various bands
PAN: 6, 12, 24, 48
12 km at nadir (24 km in wide area mode)
Lossless compression, real-time encryption
Downlink data rate
160 Mbit/s (QPSK)
HiRAIS instrument mass, power
50 kg, ~100 W
HiRAIS Instrument Calibration
The imager underwent extensive pre-launch calibration activities (Ref. 5) involving geometric, spectral, and radiometric calibrations to characterize the sensor.
The on-board radiometric calibration techniques follow closely the CEOS CAL/VAL recommendations and sites:
• PRNU (Photo Response Non-Uniformity) measurements using uniform and high reflectivity LNES (Land Non Equipped Sites)
• Dome-C around winter solstice
• Greenland around summer solstice
• Dark signal measurements using night images over the north pacific, where light sources (natural or anthropogenic) are unlikely.
• The MTF estimation will be performed using the slanted edge methodology. Same as Deimos-1 but using artificial targets instead of field transitions
• The basis of this methodology is to oversample the edge taking advantage of its tilt along the track, assuming that it is straight
• Source data will be raw data after DS and PRNU correction, which is simply applying a linear function to each column to remove stripping. No convolution or resampling will be applied
• Viewing geometry and line rate will be taken into account.
Deimos-2 radiometric characterization and cross-calibration with Dubaisat-2: 37)
Workflow of cross-calibration with DubaiSat-2:
• Deimos-2 absolutely calibrated data will be used as reference
• Data acquired on LNES (Land Non Equipped Sites) for sensor trending will be used to cross-compare with Dubaisat-2
• Cross calibration coefficients will be generated for Dubaisat-2 based on the data comparison
• Vicarious validation campaign for the absolute calibrated Dubaisat-2
• If the validation campaign is successful, both sensors will be considered absolutely calibrated and validated
Deimos-2 post-launch radiometric characterization and calibration: 38)
• DSNU (Dark Signal Non-Uniformity)
- Using acquisitions during eclipse over the North Pacific, where light sources (natural or anthropogenic) are unlikely
• PRNU (Photo Response Non-Uniformity)
- Greenland (Launched on June the 19th 2014. Dome-C unavailable at that time)
- Dome-C (Antarctica)
• MTF (Modulation Transfer Function)
- Stennis Space Flight Center (USA)
- Salon de Provence (France)
- Baotou (China).
Absolute calibration uncertainty
< 5.4% MS, ~7.4% PAN
SNR (Signal-to-Noise Ratio)
~112:1 PAN, > 90:1 MS
MTF (Modulation Transfer Function)
~9.1% PAN, > 31% MS @Nyquist
The uncertainty is expected to improve as more data becomes available.
The absolute calibration procedure results are considered acceptable, but not validated until a vicarious calibration campaign is performed.
The ground segment has been completely developed in-house by Elecnor Deimos Space, in Madrid. Deimos Imaging (DMI), a company of the Elecnor Deimos Group, will be operating the Deimos-2 mission from its premises in Spain. The link between the space and ground segments will be performed thanks to the main GS (Ground Station) Puertollano (Spain) for both telemetry and telecommand and payload data (10 m antenna dish), and optionally to the GS of Svalbard (Norway) for payload data download only. 40) 41) 42)
Deimos ground segments are based on the gs4EO (Ground Segment for Earth Observation) suite of state-of-the-art products. These products are the result of the know-how gathered for more than a decade of work for ESA (European Space Agency), customized to small Earth Observation missions. gs4EO flight operations software has been designed according to the following main drivers: 43) 44)
• Operations automation, enabling the complete handling of all the S/C operations with the minimum number of operators and maintenance costs. Nominal operations are automated with no need of operator intervention leading to minimization of operation costs
• Heavy use of virtualization technologies to simplify ground segment deployment and maintenance and to minimize ground segment deployment and maintenance costs
• Secure access to flight operations functions from remote sites, ensuring no unauthorized access to spacecraft telemetry and commanding functions (encryption and command authentication) occurs. Exploitation of wide spread secured web technologies will allow distributed flight operations
• Quick response to emergency operations, allowing reprogramming the satellite operations in a very short time, even changing the on-board operations within the same orbit (e.g. to schedule an emergency acquisition and to download it in the same orbit).
• Deployment flexibility, allowing installing the ground systems in different locations and using different sets of ground stations, both for spacecraft monitoring and control and payload data reception. It allows to install independent spacecraft control or payload data processing systems or even individual facilities (e.g. mission planning).
• Expandability: gs4EO is a modular system allowing an easy adaptation of its capabilities to future needs (e.g. collaboration with other satellite service providers).
• Based on open platforms that minimize licensing costs and facilitate interoperability and maintainability.
• Maximize interoperability, aligning with international standards whenever possible.
Ground segment architecture: Deimos-2 is the first mission where the complete suite of gs4EO products is being used. The Deimos-2 ground segment includes the complete on-ground facilities to control, monitor and commercially exploit the mission. Figure 32 shows the D2 GS high level architecture decomposition, a simplified view of the relations between the different ground segment elements, as well as the specific initial Ground Station setup for the Deimos-2 mission, with one main station in Puertollano, Spain, and a polar station (Svalbard). It is to be noted that nearly all the GS infrastructure is running in a virtualized HW environment. Archive & catalog, as well as data processing servers are easily scalable in this framework.
user4EO user services
Tool for user image acquisition request assessment with or without automatic connection to central plan4EO, together with advanced front-end for archive and catalogue query, visualization and dissemination
plan4EO mission planning
Mission plan generation for imagery acquisition and related data downlink activities to ground stations; as well as platform operations planning
fly4EO flight dynamics
Provides full orbit monitoring and maintenance capabilities, including the monitoring of space debris that would allow S/C operators to implement any required collision avoidance maneuver scenario(s) to be uplinked and then executed by the on-board SW
control4EO mission control system
Performs the monitoring and control of the satellite platform and payload, including real-time and back orbit HK (Housekeeping) TM reception, processing and visualization, telecommanding and onboard SW management
track4EO ground station control
Configuration of the ground station equipment and monitoring its operation during satellite passes
archive4EO archive & catalog
Hierarchical storage solution and meta data catalog storing archived files meta data. Catalog Web services (CSW) are used to allow access via HTTP interfaces through Description, Discovery & Publication ops.
process4EO image processing chain
Processing the payload raw data from the satellite to produce image products (radiometric and geometric corrections, up to fully ortho-rectified images)
monitor4EO monitoring & control
Data circulation, Ground Segment health monitoring and management of the complete automatic processing chain execution (orchestration)
calval4EO calibration & validation
Facility for updating and validating on-ground configuration parameters to ensure the image data quality requirements.
Two main chain are identified in the ground segment:
1) the flight operations chain, and
2) the data processing chain.
In both chains the user services element is involved, either as initiator or as final destination of the chain.
Flight operations chain: The gs4EO FOS (Flight Operations Segment) addresses one of the main challenges for small commercial missions, the reduction of operations costs. One of the main costs drivers for commercial missions that required uninterrupted exploitation of the S/C payload, is the amount of operators required in the control center during working and non working hours to perform operations tasks or even to supervise that ongoing operations are performed according to plan. This is critical to prevent any unforeseen stop on the mission data return.
For this reason it is important for small commercial missions to reduce to a minimum the amount of man power required to operate the S/C but ensuring the maximum mission return. The gs4EO FOS addresses this critical aspect by two key features:
• Automation of nominal operations
• Grant secured access to Control Center functions from remote sites.
The GS4EO FOS provides the auto4EO component, a powerful automation infrastructure that allows all nominal satellite operations to be performed without operator intervention.
All gs4EO FOS components export their functions via programmatic APIs (Application Programming Interfaces). Those APIs can be called from scripts to access those functions, in a similar way that the operator works via the component HMIs (Human Machine Interfaces). Using the various APIs , scripts can be implemented to automate all required tasks related to satellite operations.
Data processing chain: The data processing function has been designed to operate automatically and in near-real time. Several levels of processing have been defined, from the stream of raw data produced by the instrument up to fully annotated, ortho-geolocated images of standard size. Two independent processing chains are defined:
• The radiometric processing chain, which translates the instrument counts to scientific units (radiances). This chain relies on specific auxiliary information provided by the instrument, and on a calibration and characterization data base that must be updated regularly during the mission lifetime.
• The geometric processing chain, which registers the different bands, geolocates every pixel and resamples the images to a variety of standard cartographic projections.
Other product derivatives, such as pan-sharpened images, three-dimensional scenes, and domain-specific products, are also supported as higher level processing levels. Multi-temporal analysis tools and methods, especially in the field of environmental monitoring, are a strong asset at Deimos.
Although the processing chain integrates well-known transformations that are generally applicable to most optical missions, the specificities of the Deimos-2 mission have been taken into account when selecting between alternative algorithms. In addition, the modular design has made it possible that for some of the processing steps, more than one alternative module is provided. For example, the geolocation and ortho-rectification can be accomplished by using either a physical sensor model, or a RFM (Rational Function Model). Performance considerations will be used to select the best configuration during the commissioning phase of the mission.
Notwithstanding the system's capability to automatically ortho-rectify the product images, Deimos' ground segment also supports human-driven ortho-rectification. In this approach, a human operator manually identifies ground control points in both the acquired image and a reference image, using tools specifically designed for this purpose. In the context of the Deimos-1 mission, this approach has shown to be more reliable and to achieve better accuracy than the fully automatic chain.
The data processing chain incorporates different standards such as:
• Catalog Web services following OGC (Open Geospatial Consortium) standards
• EO GML meta data for products
• OGC WPS for cluster distributed processing
• ESA's Generic Interface for Instrument Data Processing (via job orders).
CAMP (Capacity Analysis and Mission Planning)
CAMP is an automated operational mission planning tool optimized for agile satellites; it provides both enhanced long-term mission return analyses and a sound prototype for a fully-automated mission planning chain, working on short-term operational horizons. 45)
The CAMP tool is constructed around two main modules (Figure 35). On top of the inputs shown on the diagram (orange blocks), both modules share a wide set of inputs describing the orbit, the ground segment and the 3 modelled platform resources: AOCS, power and data handling.
The first module generates feasible MTLs (Mission Timelines, sequence of operations). From a set of AoI (Areas of Interest), it analyses the orbital geometry to find observation opportunities and builds full MTLs that respect the constraints imposed by the system resources (modelled with some approximations). It is also able to repeat the scheduling exercise and select the best-performing MTL from the point of view of mission return (taking also cloud forecast into account). Finally, it provides results and plots about the coverage performance of the selected MTL over the simulation time.
The second module simulates the execution of the selected MTL by the spacecraft, thanks to a high-fidelity system simulator. It combines the MTL and the high-fidelity orbit propagation (based on operational orbit determination) to derive the pointing angles to be uploaded to the satellite. It then uses state-of-the-art models to simulate the AOCS, the power management and the data flow. It produces a thorough reporting of the satellite system state at any moment and detects any possible resource conflict. An MTL coming from the MTL generator has no reason to create any conflict under nominal conditions, as it uses fair models of the on board resources plus security margins. But unexpected changes in the MTL (operator manual edit for contingency reasons) or in the orbit (emergency maneuvers) might overload the system. This final crosscheck is critical for the security of the system.
Automated mission timeline generation: The tool receives as input the users' requests, represented by AoIs (Areas of Interest), and transforms them into targets. Through a geometric analysis, involving the propagated satellite orbit, the targets' position and some user defined constraints (including cloud coverage forecast) all the possible observation events are selected. They are ordered by priority and then passed to a scheduler that, thanks to approximate models of the satellite resources, generates a mission timeline satisfying the platform constraints. The MTL performance is evaluated by means of a FoM (Figure of Merit) and the ordering and scheduling process can be repeated in order to maximize the mission return. The architecture of the automated mission timeline generator is shown in Figure 36.
Overall, the CAMP tool is able to automatically translate a set of customer areas of interest, with complex characterization and constraints, into a detailed sequence of operations. This MTL (Mission Timeline) includes all system events: station keeping, various modes of Earth observation, data downlink and orbit maintenance, plus all the satellite slews and tranquillization intervals between them. It is always compliant with on-board resources: agility, power and memory. Finally, it is chosen as the best-performing MTL amongst a set of peers generated during a process of optimization that can be driven by various algorithms.
ENTICE (dEcentralized repositories for traNsparent and efficienT vIrtual maChine opErations)
Processing and distribution of big space data still presents a critical challenge: the treatment of massive and large-sized data obtained from Earth Observation satellite recordings. Remote sensing industries implement on-site conventional infrastructures to acquire, store, process and distribute the geo-information generated. However these solutions do not cover sudden changes in the demand of services and the access to the information presents large latencies. Cloud infrastructures are envisaged as a possible solution to improve EO systems dealing with large datasets, however the current technology still presents some limitations: 46) 47)
• the VMIs (Virtual Machine Images) are not optimized being highly over-sized which impacts in the costs of using the infrastructure and in the dynamic resources provisioning
• the deployment of Virtual Machines (VM) in cloud has large duration, normally between 10 and 20 minutes which directly affects to the flexibility and dynamic scalability of the system.
Deimos' research focuses in the development of Future Internet technologies in order to improve EO (Earth Observation) services and to highly reduce the costs associated with on premises deployment. Within the ENTICE H2020 project, Deimos intends to implement a flexible, cost-effective PDGS (Payload Data Ground Segment) in a cloud computing infrastructure by reducing 60% the VMI size, 30% VMI delivery time, 25% deployment time, 25% VM cost and 25% VM storage.
Note: The ENTICE project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 644179 (Ref. 48).
ENTICE has brought together a collection of three commercial use cases in the realms of energy management, cloud orchestration and big data. Companies dealing with Earth observation data, Cloud service providers and multi Cloud ecosystems will be able to optimize VM (Virtual Machine) images to effectively use Cloud resources and virtualized environments for their computing and data processing needs, trying to overcome the issues they had before:
• Manual, error-prone and time consuming VM image creation
• Monolithic VM images with large deployment and migration overheads
• Proprietary un-optimized VM repositories
• Inelastic resource provisioning
• Lack of information to support effective VM image optimization.
In the Earth observation industry, processing and distribution of big space data still presents a critical challenge: the treatment of massive and large-sized data obtained from EO satellite recordings. Remote sensing industries implement conventional on-site infrastructures to acquire, store, process and distribute the generated geo-information. However these solutions do not cover sudden changes in the demand of services and the access to the information presents large latencies.
Elecnor Deimos will improve the following Earth Observation services and highly reduce the costs associated with on premises deployments:
• Acquisition of raw data: when the imagery data is ingested from the satellite into the ground station, the system is notified and the ingestion component automatically ingests the raw data into the cloud for processing.
• Processing of the raw data: once the data is ingested, it is processed in the product processors. There are several processing levels.
• Archiving and cataloguing geo-images: the different products obtained from the processing of raw data are archived and catalogued in order to provide these images to end users or to provide high-added value services.
• Offering user services: this is the front-end of the system. It allows end users to select which product they want to visualize or to download.
Virtualization is a key technology in Cloud computing that allows users to run multiple virtual machines (VM) with their own application environment on top of physical hardware. Virtualization enables scaling up and down of applications by elastic on-demand provisioning of VMs in response to their variable load to achieve increased utilization efficiency at a lower operational cost, while guaranteeing the desired level of Quality of Service (QoS, such as response time) to the end-users. Typically, VNS are created using provider specific templates (so-called VM images) that are stored in proprietary repositories, leading to provider lock-in and hampering portability or simultaneous usage of multiple federated Clouds. Figure 37 depicts the high level architecture of the ENTICE environment. 48)
GS4EO (Ground Segment for Earth Observation) cloud-based implementation with ENTICE
The GS4EO distributed architecture computed in cloud makes use of the ENTICE environment for its virtualization. The system is constituted by a GS Monitor which continuously pools over the different ground stations subscribed to the system, a Product Processors module which processes the row data obtained from the satellite, an Archive and Catalogue module which stores and classifies the processed images and a module providing User Services. Figure 38 shows a scheme of the implementation concept with ENTICE.
One added effect of applying the ENTICE technology on a system is obtaining a process for automatic generation of micro-services. 49) The nature of the ENTICE optimization phase allows a "top-down" approach on system engineering, i.e., by gradually removing all non-essential features not included in a functional description. If the functional description includes only one task, this optimization would generate a single task-focused microservice without having to re-engineer the complete software from "bottom-up" into smaller modules.
One further consideration on this project regards system scalability. The Use Cases for testing the ENTICE technology, i.e. Land Management, Infrastructure Monitoring and Disaster Response are designed for scaling the three main parts of the system (respectively Storage, Processing and Distribution) and having to response to variable data demand scenarios. Scaling the data supply side is currently limited to adjusting for sporadic changes on the data reception (failures in ground station antennas or satellites) or to well-known passing-by calendars as defined by satellite flight dynamics.
The implementation approach with ENTICE facilitates the high level implementation and optimization of the resources by reducing the size of the VMIs, enhancing the overall system functionality by eliminating unnecessary processes and the deployment time of instances, which directly affects to the increase in the performance of the product processors and to the reduction of VM storage and costs in the use of cloud IaaS (Infrastructure as a Service).
By using the ENTICE environment, it is expected to highly decrease the delivery time of the satellite imagery to end users and therefore to improve their accessibility, increasing the competitiveness of the EO industries. It will be possible thanks to the ENTICE environment, which will drastically reduce the required time for the creation and the deployment of the VMs. This will allow to support high demanding changes adjusting the infrastructure to serve these overloads, taking advantage of the flexibility and lower time provided by the ENTICE environment.
1) Stefano Cornara, Blanca Altés-Arlandis, Matthias Renard, Stephania Tonetti, Fabrizio Pirondini, Roberto Alacevich, Annalisa Mazzoleni, "Mission Design and Analysis for the DEIMOS-2 Earth Observation Mission," Proceedings of the 63rd IAC (International Astronautical Congress), Naples, Italy, Oct. 1-5, 2012, paper: IAC-12-C1.4.9
2) Fabrizio Pirondini, Enrique Gonzalez, "DEIMOS-2: Cost-Effective, Very-High Resolution Multispectral Imagery," Proceedings of the 11th Annual JACIE (Joint Agency Commercial Imagery Evaluation ) Workshop, Fairfax, VA, USA, April 17-19, 2012, URL: http://calval.cr.usgs.gov/
3) Fabrizio Pirondini, "The DEIMOS Earth Observation System," , The Synergy of High Technology, Proceedings of Sovzond VI International Conference of Remote Sensing, Moscow, Russia, April 25-27, 2012, URL: http://www.sovzondconference.ru/upload/medialibrary/
4) Diego Lozanno, "DEIMOS Optical missions," 3rd GS Coordination Body Workshop, ESA/ESRIN, Frascati, Italy, June 6-7, 2012, URL: http://earth.esa.int/gscb/papers/2012/20-Deimos_Optical_Missions.pdf
5) Jorge Gil, Alfredo Romo, Cristina Moclan, Fabrizio Pirondini, Enrique Gonzalez, Jesus Quirce, "The Deimos-2 Mission: Pre and post-launch calibration and data validation," 12th Annual JACIE (Joint Agency Commercial Imagery Evaluation) Workshop, St. Louis, MO, USA, April 16-18, 2013, URL: https://calval.cr.usgs.gov/wordpress/wp-content/uploads/Deimos-2-CALVAL-JACIE-2013-v2.0.pdf
6) Enrique González Laguna, Jesús Quirce García, Inmaculada Serrano, Álvaro Ortiz, Juan Ramón Gijón, Antonio Ramírez Giménez, Pablo Gallego, Javier Babé, "The Deimos-2 System and Program," Proceedings of the 4S (Small Satellites Systems and Services) Symposium, Port Petro, Majorca Island, Spain, May 26-30, 2014
7) "Satrec Initiative- Challenging Space Smart," URL: http://www.satreci-us.com/documents/presentations/Introduction%20to%20SI_July%202011.pdf
8) Julio C. López, "DEIMOS-2: Cost-effective, Very-high Resolution Multispectral Imagery," 2013, URL: [web source no longer available]
9) Daniel Hernández, Mercedes Vázquez, Manuel Añón, Esperanza Olivo, Pablo Gallego , Pablo Morillo, Javier Parra, Simone Capraro , Mar Luengo, Beatriz García, Pablo Villacorta, "Environmental testing campaign and verification of satellite Deimos-2 at INTA," Proceedings of the13th European Conference on Spacecraft Structures, Materials & Environmental Testing (SSMET), Braunschweig, Germany, April 1-4, 2014, ESA SP-727
10) Patrick Blau, "Dnepr Rocket successfully Launches Cluster of 37 Satellites," Spaceflight 101, June 19, 2014, URL: http://www.spaceflight101.com/dnepr-launch-updates---2014-cluster-launch.html
11) William Graham, "Russian Dnepr rocket lofts record haul of 37 satellites," NASA Spaceflight.com, June 19, 2014, URL: http://www.nasaspaceflight.com/2014/06/russian-dnepr-rocket-record-launch-37-satellites/
14) Patrick Blau, "Dnepr - 2014 Cluster Launch," Spaceflight 101, June 10, 2014, URL: http://www.spaceflight101.com/dnepr-launch-updates---2014-cluster-launch.html
15) "Deimos Imaging Wins $2.6 million U.S. Contract and Salutes the Brazilian Ministry of Defence," Satnews Daily, 16 May 2018, URL: http://www.satnews.com/story.php?number=1304263539
16) "Olympics from orbit: main stadiums and venues captured by Deimos-2," Deimos Imaging, Feb. 2018, URL: http://www.deimos-imaging.com/olympics-from-orbit-main-stadiums-and-venues-captured-by-deimos-2
17) "UrtheCast and SIIS sign agreement for the global distribution of their respective portfolios," UrtheCast Press Release, 21 Dec. 2017, URL: http://investors.urthecast.com/file.aspx?IID=4388192&FID=391539306
18) "SIIS and UrtheCast sign agreement for the global distribution of their respective portfolios," SIIS, 21 Dec. 2017, URL: http://www.si-imaging.com/newsroom/?uid=235&mod=document
19) Theras Wood, "Olympic views from space," UrtheCast, Aug. 11, 2016, URL: https://blog.urthecast.com/updates/urthecasts-rio-olympic-round-imagery-video-new-archives/?mc_cid=87b08679b3&mc_eid=982a8dfad4
21) Theras Wood, "UrtheCast welcomes two Earth Observation satellites to its mission," UrtheCast, July 15, 2015, URL: http://blog.urthecast.com/updates/urthecasts-new-satellites-provide-big-data/
22) "UrtheCast Closes Acquisition of Earth Observation Satellites and Business Operations from Elecnor," UrtheCast Press Release, July 15, 2015, URL: http://investors.urthecast.com/file.aspx?IID=4388192&FID=30295993
24) "UK signs contract for UAE DubaiSat image applications," May 27, 2015, URL: http://www.arabianaerospace.aero/uk-signs-contract-for-uae-dubaisat-image-applications.html
25) "DEIMOS-2 is now a Copernicus Contributing Mission," April 17, 2015, eomag, EARSC, URL: https://eomag.eu/deimos-2-is-now-a-copernicus-contributing-mission/
26) "Eye on the Expo," Deimos Imaging S.L.U., March 23, 2015, URL: https://es-es.facebook.com/pages/Deimos-Imaging-SLU/138032652912280
27) "São Miguel, Azores," ESA, released on March 13, 2015 in the series 'Earth observation image of the week', URL: http://www.esa.int/spaceinimages/Images/2015/03/Sao_Miguel_Azores
28) "DEIMOS-2 Starts Commercial Operations," Deimos Elecnor, January 2015, URL: https://web.archive.org/web/20140221080623/http://www.deimos-space.com/en/
29) "DEIMOS-2 declares Initial Operational Capability and starts commercial operations," Nov. 3, 2014, URL: http://www.deimos-space.com/en/noticias/showNew.php?idNew=169
30) Fabrizio Pirondini, Salem Al Marri," The DubaiSat-2/Deimos-2 Constellation: Public Private Cooperation between Emirates and Spain," Proceedings of the 65th International Astronautical Congress (IAC 2014), Toronto, Canada, Sept. 29-Oct. 3, 2014, paper: IAC-14,B1,1.8
31) "Launch of the First Global Alliance of Earth Observation Satellites Operators," Elecnor Deimos, Press Release, Sept. 11, 2014, URL: http://www.deimos-space.com/files/archivos/Press_release_PanGeo_Elecnor_Deimos_12_09_2014.pdf
32) "EIAST joins global satellite alliance PanGeo," Arabian Aerospace online news service, October 2, 2014, URL: http://www.arabianaerospace.aero/eiast-joins-global-satellite-alliance-pangeo.html
33) "Pangeo Alliance: A Unique Earth Observation Constellation," PanGeo Alliance, URL: https://web.archive.org/web/20190103040938/http://www.pangeo-alliance.com/
34) "Elecnor Deimos publica las primeras imágenes del satélite DEIMOS-2," or in English: 'Elecnor Deimos published the first images of Deimos-2 satellite ,' La Comarca de Puertollnano, June 26, 2014, URL: http://www.lacomarcadepuertollano.com/diario/noticia/2014_06_26/47
35) "El satélite español Deimos 2 envía sus primeras imágenes," or in English: 'The Spanish satellite Deimos-2 sends its first images,' El Mundo, June 26, 2014, URL: http://www.elmundo.es/ciencia/2014/06/26/53ac4478ca47411a6d8b456f.html
36) "Llegan las primeras imágenes del Deimos 2," or in English: 'Here are the first two images of Deimos-2,' Lanza Digital, June 26, 2014, URL: http://www.lanzadigital.com/news/show/actualidad/llegan-las-primeras-imagenes-del-deimos-2/65686
37) Jorge Gil, Alfredo Romo, Cristina Moclan, Fabrizio Pirondini, Diego Lozano, Enrique Gonzalez, Jesus Quirce, "Deimos-2 Radiometric Calibration and Cross-calibration with Dubaisat-2," Proceedings of JACIE 2014 (Joint Agency Commercial Imagery Evaluation) Workshop, Louisville, Kentucky, March 26-28, 2014, URL: https://calval.cr.usgs.gov/wordpress/wp-content/uploads/14.021_Jorge-Gil_DE-2_DU-2-XCAL-JACIE-2014.pdf
38) Jorge Gil, Alfredo Romo, Cristina Moclán, Fabrizio Pirondini, "Deimos-2 Post-launch radiometric calibration," JACIE (Joint Agency Commercial Imagery Evaluation)Workshop , Tampa, FL, USA, May 4-8, 2015, URL: https://calval.cr.usgs.gov/wordpress/wp-content/uploads/Jorge-Gil_JACIE-2015_DEIMOS-2-post-launch-radiometric-calibration_fixed.pdf
39) Jorge Gil, Alfredo Romo, Cristina Moclán, Fabrizio Pirondini, "Deimos-2 post-launch radiometric calibration," 14th JACIE (Joint Agency Commercial Imagery Evaluation) Workshop, Tampa, FL, USA, May 5-7, 2015, URL: https://calval.cr.usgs.gov/wordpress/wp-content/uploads/Jorge-Gil_JACIE-2015_DEIMOS-2-post-launch-radiometric-calibration_fixed.pdf
40) A. Monge, S. Negrín, O. González, J. A. González, A. Ortíz, "gs4eo: a new ground segment for earth observation missions," Proceedings of the 64th International Astronautical Congress (IAC 2013), Beijing, China, Sept. 23-27, 2013, paper: IAC-13-B1.4.6
41) Diego Lozano, "DEIMOS optical missions," 3rd GS Coordination Body Workshop ESA/ESRIN, Frascati, Italy, 6-7 June 2012, URL: http://earth.esa.int/gscb/papers/2012/20-Deimos_Optical_Missions.pdf
42) "Elecnor Deimos inaugurates its Puertollano Integration and Satellite Operation Centre, and presents its DEIMOS-2 Satellite," Elecnor Press Release, October 8, 2013, URL: http://www.elecnor.es/en/press/press/elecnor-deimos-inaugurates-its-puertollano-integration-and-satellite-operation-centre-and-presents-its-deimos-2-satellit
43) J. A. González, O. Gonzalez, A. Fernandez, A. Monge, F. Pirondini, A. Ortiz, "gs4EO : An Innovative Solution for Flight Operations Software on Low Cost Missions," SpaceOps 2014, 13th International Conference on Space Operations, Pasadena, CA, USA, May 5-9, 2014, paper: AIAA 2014-1724, URL: http://arc.aiaa.org/doi/pdf/10.2514/6.2014-1724
44) J. A. González, C. Fernández, F. Pirondini, "gs4EO: multi-mission user services and receiving stations," Proceedings of the 65th International Astronautical Congress (IAC 2014), Toronto, Canada, Sept. 29-Oct. 3, 2014, paper: IAC-14-B1.4.4
45) M. Renard, S. Tonetti, B. Altés-Arlandis, S. Cornara, F. Pirondini, "Fully Automated Mission Planning Tool for DEIMOS-2 Agile Satellite," Proceedings of the 64th International Astronautical Congress (IAC 2013), Beijing, China, Sept. 23-27, 2013, paper: IAC-13-B4.3.2
46) José Julio Ramos, Jonathan Becedas, "Deimos' GS4EO over ENTICE: A cost-effective cloud-based solution to deploy and operate flexible Big EO Data systems with optimized performance," Proceedings of the 2016 Conference on Big Data from Space - BiDS'16, Santa Cruz de Tenerife, Spain, March 15-17, 2016, pp: 107-110, URL: http://publications.jrc.ec.europa.eu/repository/bitstream/JRC100655/LBNA27775ENN.pdf
47) "Elecnor Deimos focuses in the development of future internet technologies to improve Earth Observation Data processing and distribution," Elecnor Deimos, Feb. 29, 2016, URL: https://web.archive.org/web/20160801090200/http://www.deimos-space.com/en/noticias/showNew.php?idNew=220
49) Sam Newman, "Building Microservices," O'Reilly Media Inc., ISBN 978-1-4919-5035-7, Feb. 2015, URL: https://www.nginx.com/wp-content/uploads/2015/01/Building_Microservices_Nginx.pdf
The information compiled and edited in this article was provided by Herbert J. Kramer from his documentation of: "Observation of the Earth and Its Environment: Survey of Missions and Sensors" (Springer Verlag) as well as many other sources after the publication of the 4th edition in 2002. - Comments and corrections to this article are always welcome for further updates (email@example.com).